carrier-explode Explode and decode carrier data GitHub About
 40491

Airtel_IN in the Qualcomm modem firmware of SP2A.220505.008.

Header
MCFG version08015d05
LabelAirtel_IN
Version055d0108
Base version005d0108
Capability04000000
DigestwƸÄÚa;xP"o]G×ç9 @#dÀþÄCôŒÅ„w=
Trailer version0001
Selected by (23)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC40402any SIM
MCC-MNC40403any SIM
MCC-MNC40410any SIM
MCC-MNC40416any SIM
MCC-MNC40431any SIM
MCC-MNC40440any SIM
MCC-MNC40445any SIM
MCC-MNC40449any SIM
MCC-MNC40470any SIM
MCC-MNC40490any SIM
MCC-MNC40492any SIM
MCC-MNC40493any SIM
MCC-MNC40494any SIM
MCC-MNC40495any SIM
MCC-MNC40496any SIM
MCC-MNC40497any SIM
MCC-MNC40498any SIM
MCC-MNC40551any SIM
MCC-MNC40552any SIM
MCC-MNC40553any SIM
MCC-MNC40554any SIM
MCC-MNC40555any SIM
MCC-MNC40556any SIM
Settings (106)

efs:/data (5)

ds_dsd_attach_profile.txtunverified = "Attach_Profile_ID:1;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_dsd_attach_profile.txt
iwlan_s2b_config.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/iwlan_s2b_config.xml
ds_andsf_config.txtunverified = "andsf_rule_mgr_active:1; lte_meas_alpha:50; lte_sampling_interval:1000; lte_avg_interval:5000; wifi_meas_alpha:65; wifi_sampling_interval:1000; wifi_avg_interval:5000; cdma_1x_meas_alpha:50; cdma_1x_avg_interval:6000; cdma_1x_acq_hyst_interval:3000; cdma_1x_lost_hyst_interval:3000; cdma_1x_sampling_interval:2000;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_andsf_config.txt
Default ANDSFlikely =
ANDSF Wi-Fi/cellular steering policy (TS 24.312)efs:/data/default_andsf.xml
andsf.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/andsf.xml

efs:/Data_Profiles (3)

efs:/Data_Profiles/Profile1 =
efs:/Data_Profiles/Profile2 =
efs:/Data_Profiles/Profile3 =

efs:/efsprofiles (1)

efs:/efsprofiles/overideconfig = " [SIPConfig:GeoLocation] #enable or disable location info inclusion in regular calls iEnableCellInfoInPANI = 0 #enable or disable location info inclusion in regular calls iEnableLocInfoInNormalCall = 0 #enable or disable location info inclusion in emergency calls iEnableLocInfoInEmergencyCall = 1 #to set the threshold for uncertainty validation fUnCertaintyThreshold = 0.0 [QIPCALL:H264_2] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 7 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 117 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 118 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 384 #Preffered bitrate bitrate_preferred = 384 #Min Bitrate bitrate_min = 192 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 960 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_1] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 11 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 115 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 8 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 116 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 768 #Preffered bitrate bitrate_preferred = 768 #Min Bitrate bitrate_min = 384 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 4032 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_0] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 13 #Preffered Framerate framerate_preferred = 30 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 113 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 10 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 114 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 2048 #Preffered bitrate bitrate_preferred = 2048 #Min Bitrate bitrate_min = 768 #Max Framerate framerate_max = 30 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 16320 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:EVS_0] #channel aware setting ch_aw_recv = -1 #This config is used for hf only hf_only = 0 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. It has to be in DECIMAL format. BitRate = 120 [QIPCALL:EVS_1] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. BitRate = 120 [QIPCALL:EVS_2] #channel aware setting ch_aw_recv = -1 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [SMSDAN:USSDSettings] #This config item controls the Language String to be used. ussdLangString = "" [QIPCALL:H265_2] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationTimers] #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for SSIM device wlanGaurdTimer = 7 #This config item controls the Register configuration for the network-initiated De reg Timer value. networkInitiatedDeRegistrationTimer = 60 #This config item controls the Retry timer for permanent PDP failures pdnRetryLongTimer = 10 #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for MSIM device wlanGaurdTimerMSIM = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for SSIM device wwanGaurdTimer = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for MSIM device wwanGaurdTimerMSIM = 10 #This config item controls the Retry timer for temporary failures pdnRetryShortTimer = 60 [QIPCALL:H265_0] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [QIPCALL:H265_1] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Ut:UtConfiguration] #This config is required to configure the server responses for which UT is to be blocked permanently BlockUtResponseCodes = "" #This config item controls the media element type for Call Barring Service. 0:No media tag support, 1:One media tag per media type, 2: include both audio and video tags mediaElementSupportForCB = 0 #This config item specifies if the realm is to trimmed or not. 0:Not enabled(default), 1:enabled isTrimRealmEnabled = 0 #This config item specifies if IR92v10 is enabled or not. 0:Not enabled(default), 1:enabled isIr92V10Enabled = 0 #This config item controls the time for which the PDN needs to be kept Active after a SS request is completed pdnHysTimerValue = 0 #This config item controls the Maximum time within which a Response should be sent to UI maxResponseTimerValue = 12 #This config item controls the action item when there is no SIB value for CB request. 0:Default, 1:Reject, 2:Audio Only, 3:Both Audio and Video emptySIBUsageForCB = 0 #This config item controls the action item. When a rule id is not present in a server xml, a request is not allowed. It is used on VDF-Portugal only now. 0:Not to check a rule ID(Default), 1:Block a request when rule ID is not present in a server xml blockIfRuleIDAbsent = 0 [SIPConfig:FeatureFlags] #enable or disable sip instance inclusion in contact header IsSipInstanceNeeded = 1 #enable or disable Cellular-Network-Info header IsCNIEnabled = 1 #enable or disable header compact form IsCompactFormEnabled = 1 #enable or disable IsUIReadyStatusCheckNeeded IsUIReadyStatusCheckNeeded = 0 #disable StopTimerBon1xx once 1xx response is not received StopTimerBon1xx = 0 #enable or disable IsImsiNeededForContactHeader IsImsiNeededForContactHeader = 0 [QIPCALL:ImsVoiceSrvccConfig] #This config is required to enable bSRVCC. *bSrvccEnabled = 1 #This config is required to enable aSRVCC. *aSrvccEnabled = 1 #This config is required to enable mid call SRVCC. *midcallSrvccEnabled = 1 [QIPCALL:ImsRtcpConfig] #This config is required to configure the RR bandwidth for Video. rrForVideo = 2000 #This config is required to configure the timer for RTCP #monitoring. rtcpLinkAlivenessTimer = 25 #This config is required to configure the RS bandwidth for Audio. rsForAudio = 600 #This config is required to disbale/enable the RTCP monitoring. disableRTCPMonitoring = 0 #This config is required to configure the timer for RTCP #Reporting in VT call. rtcpReportingIntervalInVideo = 1 #This config is required to configure the RS bandwidth for Video. rsForVideo = 600 #This config is required to configure the RR bandwidth for Audio. rrForAudio = 2000 [QIPCALL:AMR_4] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:G711_2] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMA [QIPCALL:G711_1] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:G711_0] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:AMR_0] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_1] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_2] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:AMR_3] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:ImsVoiceQoSConfig] #This config is required to enable sending SDP answer in PRACK #for 183 if the local qos is granted before 183 response is recvd by #the UE. qosOptimization = 0 #This config is required to configure the timer for dedicated #bearer allocation. qosReservationTimer = 8000 #This config is required to enable set the desired qos strength #for local and remote UEs. qosDesiredStrength = 1 #This config is required to enable 183 for Reneg qosMc183 = 0 #This config is required to configure if the UE must wait for #video dedicated bearer allocation during call setup. localQosResReqVideo = 1 #This config is required to configure if the UE must wait for #text dedicated bearer allocation during call setup. localQosResReqText = 1 #This config is required to enable/disable video CRBT feature VideoCRBT = 0 #This config is required to configure the early QoS timer for video dedicated #bearer allocation. earlyQosReservationTimer = 0 #This config is required to enable Qos precondition negotiation #in SDP. qosPreconditionsEnabled = 0 #This config is required to enable Qos MC precondition negotiation #in SDP. qosMcPreconditionsEnabled = 0 #This config is required to configure the MBR threshold. iMBRthresholdValue = 0 #This config is required to configure if the UE must wait for #audio dedicated bearer allocation during call setup. localQosResReqAudio = 1 #This config is required to configure if the initial SDP #directionality should be inactive in REINVITE when preconditions are #used reinviteSdpDirInactive = 0 #This config is required to enable MBR check for video bearer. qosMbrVideoCheckReqEnabled = 1 #This config is required to configure if the initial SDP #directionality should be inactive when preconditions are used. inviteSdpDirInactive = 0 #This config is required to enable MBR check for audio bearer. qosMbrAudioCheckReqEnabled = 0 #This config is required to enable QCI match with the requested media type for qos checkQciForQoSMediaType = 0 #This config is required to enable mid-call precondition for Call Hold/Resume qosMcHold = 0 [Ut:XCAPCommonHC] #This config item controls the configuration of BSF server address bsfServerAddress = ":7080" #This config item controls whether GBA_U is enabled or not useGBAMEOnly = 0 #This config item controls whether ims prefix is added or not for Ub request like as bsf.ims.mnc005.mcc232.pub.3gppnetwork.org includeIMSPrefixForUSIM = 0 #This config item controls whether BSF server supports TLS bsfServerTlsSupport = 0 [Registration:RegistrationFeatureFlags] #This config item specifies if the sub operator is APTG and special handling is required for Options unsubscribed error or not. 0:Not enabled(default), 1:enabled optionsUnsubscribedSpecialHandling = 0 #This config item controls whether need to reset AWT timer. notResetAWTTimerEnable = 0 [QIPCALL:EVS_3] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:ImsVoiceSessionTimerConfig] #This config is required to configure the session refresher shall #be UAC/UAS. sessionRefresherType = QP_CONFIG_SES_REFRESHER_UAC #This config is required to enable session timer support. sessionTimerEnabled = 1 #This config is required to enable Stand Alone Session Expiry #negotiation. standAloneEnabled = 1 #This config is required to enable Sesssion Expiry timer #negotiation. allowSeNegotiation = 0 #This config is required to configure the method for session #referesh shall be REINVITE/UPDATE. sessionRefresherMethod = QP_CONFIG_SES_REFRESH_UPDATE [QIPCALL:ImsVoiceConfig] #This config is required to configure the Emergency call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network emergencyCallCancelTimer = 500 #This config is required to configure the default WPS invite duration. wpsInviteDuration = 0 #This config is required to enable 380 response validation as per #3GPP. enableAlternateSrvRspCheck = 1 #This config is required to set the display text priority #subscription. displayTextPriority = 3 #This config is required to include MTT USSD feature tag into IMS registration. ussdAcceptContact = "+g.3gpp.nw-init-ussi" #This config is required to configure the default invite retry counter. inviteRetryCounter = 5 #This config is required to select the default emergency URI if sub category matches with multiple entries e911SelectDefURI = 0 #This config is required to disable early media timer. disableEarlyMediaTimer = 0 #This config is required to configure the voice call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network voiceCallCancelTimer = 0 #This config is required to place AMR WB before AMR in encryption call. preferAMRWBinEncryptionCall = 0 #This config is required to enable PEM header in 183. enablePEMHeaderIn183 = 0 #This config is required to configure the default URI type #(SIP/TEL) for MO calls. uriType = QPE_IMS_URI_TEL #This config is required to configure the enabling of sending REINVITE #during Active calls HO. reInviteonHOforActiveCalls = 0 #This config is required to configure the terminating identity presentation or restriction type. terminatingIdentityService = 0 #This config is required to configure the default WPS fallback duration. wpsFallbackDuration = 0 #This config is required to configure the ignoring of AS value ignoreASValidation = 0 #This config is required to configure the max-red value max_red = 0 #This config is required to set error code for CT submode. sessionEndResponseTimeout = 0 #This config is required to enable VoWIFI Call Continuity to LTE NonVOPS. enableVCCtoLTENonVOPS = 0 #This config is required to configure the default invite retry duration. inviteRetryDefDuration = 8000 #This config is required to enable emergency call operation in CS-only mode. *emergCallCSOnly = 1 #This config is required to configure number format during roaming, geo-local/home-local phoneContextPolicy = QPE_IMS_PHONE_CONTEXT_GEO_LOCAL #This config is required to enable Call end on RTP inactivity. CallEndonRTPInactivity = 0 #This config is required to set the phone context domain source. PhoneContextSource = QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_MCC_MNC #This config is required to set preconditions enabled with qos events ignored. ignoreQOSEvents = 0 #This config is required to enable the MT USSI. enableMTUSSI = 1 #This config is required to configure the privacy type. Set 0: for none, 1: for id, 2: for header. privacyType = 2 [Registration:RegistrationDefaultParams] #This config item will be used to configure default UserName to register with Network userName = "" #This config item will be used to configure default authType to register with Network authType = "" #This config item will be used to configure default Display Name to register with Network displayName = "" #This config item will be used to configure default DomainName to register with Network domainName = "" #This config item will be used to configure default authSecertKey authSecertKey = "" #This config item will be used to configure default Private URI to register with Network privateURI = "" #This config item will be used to configure default is3GPP is3GPP = 0 #This config item will be used to configure default Realm to register with Network realm = "" #This config item will be used to configure default public URI to register with Network publicURI = "" #This config item will be used to configure default Password to register with Network password = "" [QIPCALL:ImsVoiceSuppsConfig] #This config is required to configure the timer for Notify #response to Refer. notifyReferRspTimer = 20 #This config is required to end the conference call automatically #when all other participants left the call. endConfCallUponNoParticipant = 0 #This config is required to enable presentation of the call to #the user when UE is already in two calls (active and held). *presentThirdCalltoUser = 1 #This config is required to configure the conference event #package subscription timer. confEvtSubTimer = 3600 #This config is required not to send unsubscribe to NW for conference call when there is #no notify-terminated received. isUnsubcribeDisabled = 0 #This config is required to configure the dialog for the #conference event subscribe request. confEvtSubOutOfDialog = 1 #This config is required to configure the three party conf URI #for KDDI. threePartyConfFactoryUri = "" #This config is required to enable the conference event package #subscription. confEvtPakageEnabled = QPE_IMS_CONF_PCKG_ORIGINATOR_ONLY [QIPCALL:ImsRtcpXRConfig] #This config is required to enable RTCP-XR support. rtcpXrEnabled = 0 [SMSDAN:DANSettings] #This config item controls QIPCall 1x SMS and Voice Enabled (0:DAN SMS can be sent only if there is no voice call. #1:Enabled; DAN and MO SMS can be sent even when a voice call is up). smsAndVoiceOver1x = 0 #This NV item is used for configuring the transport channel preference on which DAN is to be sent. channelPreference = 0 #This config item controls the DAN Retry Timer Interval Duration (In ms) retryTimer = 0 #This config item controls the DAN Max Retry Counter maxRetryCount = 0 #This NV item is used for controlling DAN Hysterisis Timer Duration hysterisisTimer = 0 [QIPCALL:H263_0] #payload type number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationCounters] #This config item controls the Immediate Retry timer for failures maxPDNIntermediateRetries = 1 [QIPCALL:ImsVideoConfig] #This config is required to configure the LTR mode. ltrMode = QP_CONFIG_IMS_LTR_DISABLED #This config is required to configure if VT capability can be impacted by modile data. vtImpactedByMobileData = 0 #This config is required to set the video_capability_for_invite_no_sdp for #incoming INVITE without SDP. video_capability_for_invite_no_sdp = 1 #Internal:This config is required to store peer supported #services trackPeerServices = 1 [SIPConfig:Transport] #above this size choose TCP and value 0 means disable tcp port open on UE TCPThresholdValue = 1300 #enable or disable TCP Static threshold TCPEnableStaticThreshold = 0 [SIPConfig:StandardTimers] #sip registration expires value SipRegValue = 600000 #sip reg subscription expires value SipSubscribeValue = 600000 [SIPConfig:IPSec] #integrity scheme for ipsec sip messages IntScheme = 3 #encryption algo for ipsec sip messages EncAlgo = 7 [SMSDAN:SMSSettings] #This config item used to configure the error code and used while reject Incoming MT sms while NAS is busy in service one SMS. IncomingSmsRejectCode = 400 #This config item used to enable or disable feature of rejecting incoming SMS when IMS is already processing a SMS. EnableIncomingSmsRejectFeature = 0 #This config item controls the SMS Feature tag smsAcceptContact = "+g.3gpp.smsip" [MEDIA:MediaCommon] #This config item specifies if overall rate adaptation feature is enabled or not. audioRAEnable = 1 #This config item specifies maximum mtu size for the rtp packet *mtuSize = 1500 [Registration:RegistrationSettings] #This config item controls Registration over IWLAN in airplane mode enableRegistrationInLPM = 2 #This config item controls PCSCF IP fallback feature pcscfBasedIPFallback = 1 #This config item controls TTY over IMS enableTTYOverIMS = 0 #This config item controls Reregistration over WIFI during Activate 3G call BlockRegOverWifiWhileActiveCSCall = 0 #This config item controls Reregistration over WIFI during Activate 1x call BlockRegOverWifiWhileActive1XCall = 0 [Ut:XcapHCConfigUserProfile] #This config item controls the configured user name configUserName = "" #This config item controls the configured user name configUserPassword = "" [DPL:Common] #This config item determines usage to read the SIM card parameters (ISIM, USIM ) etc #Possible INTEGER values for override are as follows: #QPE_CONFIG_IMS_FILE_READ = 0 --> File Read Param Source #QPE_CONFIG_IMS_NV_READ = 1 --> NV Read Param Source #QPE_CONFIG_IMS_CARD_READ = 2 --> Card Read Param Source to read from ISIM #QPE_CONFIG_IMS_FILE_READ_AUTH_ENABLED = 3 --> File Read Param Auth enabled (ONLY for testing) #QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED = 4 --> USIM fallback enabled ParamSrc = QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED [QIPCALL:ImsMediaProfileConfig] #This config is required to video codec profile list on 4G. VideoProfile1 = "H264_2;H264_1;H264_0" #This config is required to audio codec profile list. AudioProfile1 = "AMR_4_104;AMR_1_99;AMR_2_103;AMR_0_97" [QIPCALL:ImsVoWifiConfig] #This config is required to configure the wifi connectivity #backoff timer. wifiConnectivityBackoffTimer = 10 [MEDIA:MediaDscp] #This config item specifies dscp value for audio audio = 60 #This config item specifies dscp value for video video = 45 [QIPCALL:ImsVideoModifyConfig] #This config is required to configure the timer in msecs for #waiting on user response to the incoming upgrade req. localUpgradeAcceptTimer = 15000 #This config is required to configure the timer in secs for #response from the peer to the sent upgrade req. remoteUpgradeRejectTimer = 40 [SIPConfig:CustomTimers] #reliable response retry timer cap TRelResponseRetry = 0 "

efs:/google (4)

efs:/google/paris_version = "g670_default_32_201910022029 "
efs:/google/cust_ims_ua_enable = 1
efs:/google/user_agent_template = "Google_[MI__ap]_[SW__ap]"
efs:/google/fd_timers.conf = 85899345940x200000002

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -118; LTEDLRSRPThresholdTargetHigh = -115; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 3; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -15; WCDMA_TRAT_ECIO_Threshold = -10; WCDMA_SRAT_RSCP_Threshold = -115; WCDMA_TRAT_RSCP_Threshold = -110; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -125; LTE_RSRP_Single_in = -118; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -170; LTE_SNR_Single_out = 75; LTE_SNR_Single_in = 85; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/data/wlan_config (1)

wlan_offload_configunverified = 2
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wlan_offload_config

efs:/nv/item_files/ims (24)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 1= Enabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 2
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item

efs:/nv/item_files/modem/data/3gpp/dsmgr (1)

emergency_apn_typeunverified = 1310730x20001
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/dsmgr/emergency_apn_type

efs:/nv/item_files/modem/data/3gpp/ps (1)

modem_def_prof_supportunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/modem_def_prof_support

efs:/nv/item_files/modem/lte/rrc/cap (2)

diff_fdd_tdd_fgi_enableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/diff_fdd_tdd_fgi_enable
mdt_r10_feature_disableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/mdt_r10_feature_disable

efs:/nv/item_files/modem/mmode (10)

SMS onlylikely = 0= Off
Register for SMS onlyefs:/nv/item_files/modem/mmode/sms_only
rpm_infounverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/rpm_info
SMS domain preference = 1= PS (IMS) SMS preferred
SMS over IMS preferenceefs:/nv/item_files/modem/mmode/sms_domain_pref
SMS mandatorylikely = 1= On
SMS is mandatory for the device (block LTE if IMS/SGs SMS registration fails)efs:/nv/item_files/modem/mmode/sms_mandatory
Voice domain preference = 3= IMS PS voice preferred
E-UTRAN voice domain (TS 24.301 9.9.3.44)efs:/nv/item_files/modem/mmode/voice_domain_pref
LTE band preferencelikely = ffffffffff7fffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref
wifi_configunverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/wifi_config
ue_based_cwunverified = 0
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/ue_based_cw
supplement_service_domain_prefunverified = 1
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/supplement_service_domain_pref
mid_call_srvcc_infounverified = 10995129077770x10000138801
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/mid_call_srvcc_info

efs:/nv/item_files/modem/nas (2)

aggression_managementunverified = 1
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/aggression_management
SRVCC support = 1= On
SRVCC capability indication from E-UTRAN to UTRAN (TS 23.216)efs:/nv/item_files/modem/nas/nas_srvcc_support

efs:/nv/item_files/modem/uim/mmgsdi (1)

refresh_vote_okunverified = 1
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/mmgsdi/refresh_vote_ok

efs:/nv/item_files/wcdma (1)

wcdma_rrc_featureunverified = 0
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/wcdma_rrc_feature

efs:/nv/item_files/wcdma/rrc (2)

wcdma_rrc_csfb_skip_sib11_optunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_csfb_skip_sib11_opt
wcdma_rrc_dormancy_supportunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_dormancy_support

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

efs:/sd (1)

efs:/sd/rat_acq_order = 03e7000405030204

nv (45)

RTRE Configurationlikely = 0
nv:855
Acquisition Order Preferencelikely = 0
nv:848
Network Selection Mode Preferencelikely = 0
nv:849
Hybrid preference = 1= On
Hybrid CDMA 1x + HDR operationnv:562
GSM/UMTS SMS Bearer Preferencelikely = 2
nv:909
Band Class Preferencelikely = 65535
nv:441
Band preference bits 16-31 = 49151= GSM 450, GSM 480, GSM 750, GSM 850, GSM railways 900, GSM PCS 1900, WCDMA B1 2100, WCDMA B2 1900, WCDMA B3 1800, WCDMA B4 1700, WCDMA B5 850, WCDMA B6 800, bit 12, bit 13, bit 15
Expand Band Preference 16 To 32 Bitsnv:946
Bits 32 To 63 Of Band Preflikely = 4294967295= bit 0, bit 1, bit 2, bit 3, bit 4, bit 5, bit 6, bit 7, bit 8, bit 9, bit 10, bit 11, bit 12, bit 13, bit 14, bit 15, WCDMA B7 2600, WCDMA B8 900, WCDMA B9 1700, bit 19, bit 20, bit 21, bit 22, bit 23, bit 24, bit 25, bit 26, bit 27, WCDMA B19 850, WCDMA B11 1500, bit 30, bit 310xffffffff
nv:2954
GSM/UMTS Cell Broadcast SMS Carrier Configurationlikely = 1
nv:1016
GSM/UMTS Cell Broadcast SMS User Preferencelikely = 2
nv:1017
Force UE SGSNR GSM R99 Versionlikely = 2
nv:1030
Force UE MSCR GSM R99 Versionlikely = 2
nv:1031
MS SMS Max Number Of SMSlikely = 255
nv:3006
SMS MO Retry Periodlikely = 180
nv:3532
SMS MO Retry Intervallikely = 45
nv:3533
DTM Feature Supportlikely = 0
nv:3628
DTM Multislot Classlikely = 3
nv:3629
Disable CM Call Typelikely = 0
nv:5280
UMTS AMR Codec Preference Configlikely = 5
nv:6850
CS TO VOIP Fallback Timerlikely = 10
nv:6830
VOIP Cancel Retry Timerlikely = 10
nv:6831
Mode preference = 4= Automatic
Digital/Analog Mode Preferencenv:10
ENS Enabledlikely = 0= Off
Enhanced Network Selectionnv:3461
AAGPS Positioning Modes Supportedlikely = 127
nv:1920
RRC Integrity Enabledlikely = 1
nv:880
RRC Ciphering Enabledlikely = 1
nv:881
RRC Fake Security Enabledlikely = 0
nv:882
WCDMA RX Diversity Controllikely = 3
nv:3851
HSDPA Categorylikely = 14
3GPP HSDPA UE categorynv:4118
WCDMA HSUPA CM Controllerlikely = 1
nv:5090
WCDMA RRC Versionlikely = 4
nv:3649
WCDMA RRC PDCP Disabledlikely = 1
nv:4173
WCDMA HSUPA Categorylikely = 6
3GPP HSUPA UE categorynv:4210
CPU Based Flow Controllikely = 1
nv:4261
WCDMA Equalizer Controllikely = 51
nv:3852
GSM A5 Algorithms Supportedlikely = 5
nv:553
UIM First Instruction Classlikely = 1
nv:896
GSM AMR Call Configurationlikely = 1
nv:1302
Repeated ACCHlikely = 1
nv:5107
EDGE Feature Supportlikely = 1
nv:2508
EDA Feature Supportlikely = 1
nv:3630
GERAN Feature Pack 1likely = 1
nv:2512
EDTM Feature Supportlikely = 0
nv:4209
GPRS GEA Algorithms Supportedlikely = 7
nv:4432
Bannerlikely = "Airtel"
nv:71

Commercial-Reliance in the Qualcomm modem firmware of SP2A.220505.008.

Header
MCFG version08011b29
LabelCommercial-Reliance
Version2a1b0108
Base version0c1b0108
Capability04000000
DigestX´$¤¿m;Ž ¾Ó#VZ™yp=ðp"K:é}‡´mTü
Trailer version0001
Selected by (22)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC405840any SIM
MCC-MNC405854any SIM
MCC-MNC405855any SIM
MCC-MNC405856any SIM
MCC-MNC405857any SIM
MCC-MNC405858any SIM
MCC-MNC405859any SIM
MCC-MNC405860any SIM
MCC-MNC405861any SIM
MCC-MNC405862any SIM
MCC-MNC405863any SIM
MCC-MNC405864any SIM
MCC-MNC405865any SIM
MCC-MNC405866any SIM
MCC-MNC405867any SIM
MCC-MNC405868any SIM
MCC-MNC405869any SIM
MCC-MNC405870any SIM
MCC-MNC405871any SIM
MCC-MNC405872any SIM
MCC-MNC405873any SIM
MCC-MNC405874any SIM
Settings (109)

efs:/ (1)

efs:/rmnet_config.txt =

efs:/data (5)

ds_dsd_attach_profile.txtunverified = "Attach_Profile_ID:1;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_dsd_attach_profile.txt
iwlan_s2b_config.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/iwlan_s2b_config.xml
ds_andsf_config.txtunverified = "andsf_rule_mgr_active:1; lte_meas_alpha:50; lte_sampling_interval:1000; lte_avg_interval:5000; wifi_meas_alpha:65; wifi_sampling_interval:1000; wifi_avg_interval:5000; cdma_1x_meas_alpha:50; cdma_1x_avg_interval:6000; cdma_1x_acq_hyst_interval:3000; cdma_1x_lost_hyst_interval:3000; cdma_1x_sampling_interval:2000; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_andsf_config.txt
Default ANDSFlikely =
ANDSF Wi-Fi/cellular steering policy (TS 24.312)efs:/data/default_andsf.xml
andsf.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/andsf.xml

efs:/Data_Profiles (3)

efs:/Data_Profiles/Profile1 =
efs:/Data_Profiles/Profile2 =
efs:/Data_Profiles/Profile3 =

efs:/efsprofiles (1)

efs:/efsprofiles/overideconfig = " [SIPConfig:GeoLocation] #enable or disable location info inclusion in regular calls iEnableCellInfoInPANI = 0 #enable or disable location info inclusion in regular calls iEnableLocInfoInNormalCall = 0 #enable or disable location info inclusion in emergency calls iEnableLocInfoInEmergencyCall = 1 #to set the threshold for uncertainty validation fUnCertaintyThreshold = 0.0 [QIPCALL:H264_2] #This config is to specify the profile for H264. Only use value 1 #The possible values of this enum are: #/** Invalid Profile*/ #QP_CONFIG_IMS_H264_PROFILE_INVALID = 0x00, #/** Baseline Profile.*/ #QP_CONFIG_IMS_H264_PROFILE_BASELINE = 0x01, #/** Main Profile.*/ #QP_CONFIG_IMS_H264_PROFILE_MAIN = 0x02, #/** Extended Profile.*/ #QP_CONFIG_IMS_H264_PROFILE_EXTENDED = 0x03, #/** High Profile.*/ #QP_CONFIG_IMS_H264_PROFILE_HIGH = 0x04 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 7 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 117 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 118 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 384 #Preffered bitrate bitrate_preferred = 384 #Min Bitrate bitrate_min = 192 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 960 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_1] #This config is to specify the profile for H264. Only use value 1 #The possible values of this enum are: #/** Invalid Profile*/ #QP_CONFIG_IMS_H264_PROFILE_INVALID = 0x00, #/** Baseline Profile.*/ #QP_CONFIG_IMS_H264_PROFILE_BASELINE = 0x01, #/** Main Profile.*/ #QP_CONFIG_IMS_H264_PROFILE_MAIN = 0x02, #/** Extended Profile.*/ #QP_CONFIG_IMS_H264_PROFILE_EXTENDED = 0x03, #/** High Profile.*/ #QP_CONFIG_IMS_H264_PROFILE_HIGH = 0x04 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 11 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 115 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 8 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 116 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 768 #Preffered bitrate bitrate_preferred = 768 #Min Bitrate bitrate_min = 384 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 4032 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_0] #This config is to specify the profile for H264. Only use value 1 #The possible values of this enum are: #/** Invalid Profile*/ #QP_CONFIG_IMS_H264_PROFILE_INVALID = 0x00, #/** Baseline Profile.*/ #QP_CONFIG_IMS_H264_PROFILE_BASELINE = 0x01, #/** Main Profile.*/ #QP_CONFIG_IMS_H264_PROFILE_MAIN = 0x02, #/** Extended Profile.*/ #QP_CONFIG_IMS_H264_PROFILE_EXTENDED = 0x03, #/** High Profile.*/ #QP_CONFIG_IMS_H264_PROFILE_HIGH = 0x04 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 13 #Preffered Framerate framerate_preferred = 30 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 113 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 10 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 114 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 2048 #Preffered bitrate bitrate_preferred = 2048 #Min Bitrate bitrate_min = 768 #Max Framerate framerate_max = 30 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 16320 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:EVS_0] #channel aware setting ch_aw_recv = 2 #This config is used for hf only hf_only = 0 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, #Possible INTEGER values for Bandwidth are as follows: #0 --> BandWidth_NB #1 --> BandWidth_WB #2 --> BandWidth_SWB #3 --> BandWidth_FB #4 --> BandWidth_NB_WB #5 --> BandWidth_NB_SWB #6 --> BandWidth_NB_FWB #7 --> BandWidth_MAX Bandwidth = BandWidth_WB #This config is used for bit rate. It has to be in DECIMAL format. BitRate = 24 [QIPCALL:EVS_1] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, #Possible INTEGER values for Bandwidth are as follows: #0 --> BandWidth_NB #1 --> BandWidth_WB #2 --> BandWidth_SWB #3 --> BandWidth_FB #4 --> BandWidth_NB_WB #5 --> BandWidth_NB_SWB #6 --> BandWidth_NB_FWB #7 --> BandWidth_MAX Bandwidth = BandWidth_SWB #This config is used for bit rate. BitRate = 120 [QIPCALL:EVS_2] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, #Possible INTEGER values for Bandwidth are as follows: #0 --> BandWidth_NB #1 --> BandWidth_WB #2 --> BandWidth_SWB #3 --> BandWidth_FB #4 --> BandWidth_NB_WB #5 --> BandWidth_NB_SWB #6 --> BandWidth_NB_FWB #7 --> BandWidth_MAX Bandwidth = BandWidth_SWB #This config is used for bit rate. BitRate = 24 [SMSDAN:USSDSettings] #This config item controls the Language String to be used. ussdLangString = "" [QIPCALL:H265_2] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationTimers] #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for SSIM device wlanGaurdTimer = 7 #This config item controls the Register configuration for the network-initiated De reg Timer value. networkInitiatedDeRegistrationTimer = 60 #This config item controls the waiting time for sending Reg or Dereg. Unit is ms. FTConsolidateTimer = 0 #This config item controls the Retry timer for permanent PDP failures pdnRetryLongTimer = 10 #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for MSIM device wlanGaurdTimerMSIM = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for SSIM device wwanGaurdTimer = 7 #This config item controls the time in seconds for epDN retry procedures ePDNDefaultRetryTimerVal = 0 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for MSIM device wwanGaurdTimerMSIM = 10 #This config item controls the time in seconds for emergency registration procedure to complete before declaring failure timerE1 = 0 #This config item controls the Retry timer for temporary failures pdnRetryShortTimer = 60 [QIPCALL:H265_0] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [QIPCALL:H265_1] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Ut:UtConfiguration] #This config is required to configure the server responses for which UT is to be blocked permanently BlockUtResponseCodes = "" #This config item controls the media element type for Call Barring Service. Possible values for override are as follows: #QP_NO_MEDIA_TAG = 0 -->No media tag support #QP_ONLY_VIDEO_TAG_FOR_VT = 1 -->One media tag per media type #QP_AUDIO_AND_VIDEO_TAGS_FOR_VT = 2 -->include both audio and video tags #QP_NO_MEDIA_TAG_FOR_VOICE_AND_ONLY_VIDEO_TAG_FOR_VT = 3 -->include Only video tag mediaElementSupportForCB = 0 #This config item specifies if the realm is to trimmed or not. 0:Not enabled(default), 1:enabled isTrimRealmEnabled = 0 #This config item specifies if IR92v10 is enabled or not. 0:Not enabled(default), 1:enabled isIr92V10Enabled = 0 #This config item controls the time for which the PDN needs to be kept Active after a SS request is completed pdnHysTimerValue = 0 #This config item controls the Maximum time within which a Response should be sent to UI maxResponseTimerValue = 12 #This config item specifies if CFNL request is blocked with CFNRc. 0:Not enabled(default), 1:enabled isCFNLBlockedwithCFNRc = 0 #This config item controls the action item when there is no SIB value for CB request. Possible values for override are as follows: #QP_NO_HANDLING = 0 --> Default #QP_REJECT_EMPTY_SIB = 1 --> Reject #QP_AUDIO_RULE_ONLY = 2 --> Audio Only #QP_AUDIO_AND_VIDEO_RULES = 3 --> Both Audio and Video emptySIBUsageForCB = 0 #This config item controls the action item. When a rule id is not present in a server xml, a request is not allowed. It is used on VDF-Portugal only now. 0:Not to check a rule ID(Default), 1:Block a request when rule ID is not present in a server xml blockIfRuleIDAbsent = 0 #This config item specifies if the GET request is to be sent at simservs node level. 0:Not enabled(default), 1:enabled isReqAtSimservsNode = 0 [SIPConfig:FeatureFlags] #enable or disable sip instance inclusion in contact header IsSipInstanceNeeded = 1 #enable or disable Cellular-Network-Info header IsCNIEnabled = 1 #enable or disable IsUserPartNeededForContactHeader IsUserPartNeededForContactHeader = 1 #enable or disable header compact form IsCompactFormEnabled = 1 #enable or disable IsUIReadyStatusCheckNeeded IsUIReadyStatusCheckNeeded = 0 #disable StopTimerBon1xx once 1xx response is not received StopTimerBon1xx = 0 #enable or disable IsImsiNeededForContactHeader IsImsiNeededForContactHeader = 0 [QIPCALL:ImsVoiceSrvccConfig] #This config is required to enable SRVCC based on contact header FT. enableSRVCCOnContactHeader = 0 #This config is required to enable bSRVCC. bSrvccEnabled = 0 #This config is required to enable aSRVCC. aSrvccEnabled = 0 #This config is required to enable mid call SRVCC. midcallSrvccEnabled = 0 [QIPCALL:ImsRtcpConfig] #This config is required to configure the RR bandwidth for Video. rrForVideo = 2000 #This config is required to configure the timer for RTCP #monitoring. rtcpLinkAlivenessTimer = 25 #This config is required to configure the RS bandwidth for Audio. rsForAudio = 600 #This config is required to disbale/enable the RTCP monitoring. disableRTCPMonitoring = 0 #This config is required to configure the timer for RTCP #Reporting in VT call. rtcpReportingIntervalInVideo = 1 #This config is required to configure the RS bandwidth for Video. rsForVideo = 600 #This config is required to configure the RR bandwidth for Audio. rrForAudio = 2000 [QIPCALL:AMR_4] #This config is bandwidth. #enum - BW_NW, BW_WB #Possible INTEGER values for Bandwidth are as follows: #0 --> BandWidth_NB #1 --> BandWidth_WB #2 --> BandWidth_SWB #3 --> BandWidth_FB #4 --> BandWidth_NB_WB #5 --> BandWidth_NB_SWB #6 --> BandWidth_NB_FWB #7 --> BandWidth_MAX BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA #Possible INTEGER values for Mode are as follows: #0 --> AMR_MODE_BE #1 --> AMR_MODE_OA #2 --> AMR_MODE_MAX Mode = AMR_MODE_OA [QIPCALL:G711_2] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA #Possible INTEGER values for override Mode mask values are as follows: #0 --> G711_MODE_PCMU #1 --> G711_MODE_PCMA #2 --> G711_MODE_MAX Mode = G711_MODE_PCMA [QIPCALL:G711_1] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA #Possible INTEGER values for override Mode mask values are as follows: #0 --> G711_MODE_PCMU #1 --> G711_MODE_PCMA #2 --> G711_MODE_MAX Mode = G711_MODE_PCMU [QIPCALL:G711_0] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA #Possible INTEGER values for override Mode mask values are as follows: #0 --> G711_MODE_PCMU #1 --> G711_MODE_PCMA #2 --> G711_MODE_MAX Mode = G711_MODE_PCMU [QIPCALL:AMR_0] #This config is bandwidth. #enum - BW_NW, BW_WB #Possible INTEGER values for Bandwidth are as follows #0 --> BandWidth_NB #1 --> BandWidth_WB #2 --> BandWidth_SWB #3 --> BandWidth_FB #4 --> BandWidth_NB_WB #5 --> BandWidth_NB_SWB #6 --> BandWidth_NB_FWB #7 --> BandWidth_MAX BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA #Possible INTEGER values for Mode are as follows: #0 --> AMR_MODE_BE #1 --> AMR_MODE_OA #2 --> AMR_MODE_MAX Mode = AMR_MODE_BE [QIPCALL:AMR_1] #This config is bandwidth. #enum - BW_NW, BW_WB #Possible INTEGER values for Bandwidth are as follows: #0 --> BandWidth_NB #1 --> BandWidth_WB #2 --> BandWidth_SWB #3 --> BandWidth_FB #4 --> BandWidth_NB_WB #5 --> BandWidth_NB_SWB #6 --> BandWidth_NB_FWB #7 --> BandWidth_MAX BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA #Possible INTEGER values for Mode are as follows: #0 --> AMR_MODE_BE #1 --> AMR_MODE_OA #2 --> AMR_MODE_MAX Mode = AMR_MODE_BE [QIPCALL:AMR_2] #This config is bandwidth. #enum - BW_NW, BW_WB #Possible INTEGER values for Bandwidth are as follows: #0 --> BandWidth_NB #1 --> BandWidth_WB #2 --> BandWidth_SWB #3 --> BandWidth_FB #4 --> BandWidth_NB_WB #5 --> BandWidth_NB_SWB #6 --> BandWidth_NB_FWB #7 --> BandWidth_MAX BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA #Possible INTEGER values for Mode are as follows: #0 --> AMR_MODE_BE #1 --> AMR_MODE_OA #2 --> AMR_MODE_MAX Mode = AMR_MODE_OA [QIPCALL:AMR_3] #This config is bandwidth. #enum - BW_NW, BW_WB #Possible INTEGER values for Bandwidth are as follows: #0 --> BandWidth_NB #1 --> BandWidth_WB #2 --> BandWidth_SWB #3 --> BandWidth_FB #4 --> BandWidth_NB_WB #5 --> BandWidth_NB_SWB #6 --> BandWidth_NB_FWB #7 --> BandWidth_MAX BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA #Possible INTEGER values for Mode are as follows: #0 --> AMR_MODE_BE #1 --> AMR_MODE_OA #2 --> AMR_MODE_MAX Mode = AMR_MODE_BE [QIPCALL:ImsVoiceQoSConfig] #This config is required to enable sending SDP answer in PRACK #for 183 if the local qos is granted before 183 response is recvd by #the UE. qosOptimization = 0 #This config is required to configure the timer for dedicated #bearer allocation. qosReservationTimer = 8000 #This config is required to enable set the desired qos strength #for local and remote UEs. qosDesiredStrength = 1 #This config is required to enable 183 for Reneg qosMc183 = 0 #This config is required to configure if the UE must wait for #video dedicated bearer allocation during call setup. localQosResReqVideo = 1 #This config is required to configure if the UE must wait for #text dedicated bearer allocation during call setup. localQosResReqText = 1 #This config is required to enable qos call flow when call is on wifi simulateQoSInWifi = 0 #This config is required to enable/disable video CRBT feature VideoCRBT = 0 #This config is required to configure the early QoS timer for video dedicated #bearer allocation. earlyQosReservationTimer = 0 #This config is required to enable Qos precondition negotiation #in SDP. qosPreconditionsEnabled = 0 #This config is required to enable Qos MC precondition negotiation #in SDP. qosMcPreconditionsEnabled = 0 #This config is required to configure the MBR threshold. iMBRthresholdValue = 0 #This config is required to configure if the UE must wait for #audio dedicated bearer allocation during call setup. localQosResReqAudio = 1 #This config is required to configure if the initial SDP #directionality should be inactive in REINVITE when preconditions are #used reinviteSdpDirInactive = 0 #This config is required to enable MBR check for video bearer. qosMbrVideoCheckReqEnabled = 1 #This config is required to configure if the initial SDP #directionality should be inactive when preconditions are used. inviteSdpDirInactive = 0 #This config is required to start Mid-call qos timer after HO from Wifi to LTE is success startMcqosAfterHOfromWifitoLte = 1 #This config is required to enable MBR check for audio bearer. qosMbrAudioCheckReqEnabled = 0 #This config is required to enable QCI match with the requested media type for qos checkQciForQoSMediaType = 0 #This config is required to enable mid-call precondition for Call Hold/Resume qosMcHold = 0 [Ut:XCAPCommonHC] #This config item controls whether GBA_U is enabled or not useGBAMEOnly = 0 #This config item controls whether ims prefix is added or not for Ub request like as bsf.ims.mnc005.mcc232.pub.3gppnetwork.org includeIMSPrefixForUSIM = 0 #This config item controls whether to ignore RSp Auth failure or not IgnoreRSPAuthFailure = 0 #This config item controls the configuration of BSF server address bsfServerAddress = ":7080" #This config item controls whether to use user mode for TLS useUserModeForTLS = 0 #This config item controls whether BSF server supports TLS. Possible values for override are as follows: #eQP_IMS_XCAP_GBA_TLS_MODE_OVER_UB_NONE = 0 --> not enabled #eQP_IMS_XCAP_GBA_TLS_MODE_OVER_UB_ON = 1 --> Enabled bsfServerTlsSupport = 0 [Registration:RegistrationFeatureFlags] #This config item specifies if the sub operator is APTG and special handling is required for Options unsubscribed error or not. 0:Not enabled(default), 1:enabled optionsUnsubscribedSpecialHandling = 0 #This config item controls whether need to reset AWT timer. notResetAWTTimerEnable = 0 #This config item controls whether Perm block over IWLAN need to reset or not. resetPermblockOverIwlan = 0 #This config item controls whether IWLAN Config failure is to be handled as internal failure. specialhandlingForIWLANConfigFailure = 0 #This config item controls whether measurement on IWLNA should be ignored during APM on. IgnoreWiFiMeasurementDuringAPMOn = 0 [QIPCALL:EVS_3] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, #Possible INTEGER values for Bandwidth are as follows: #0 --> BandWidth_NB #1 --> BandWidth_WB #2 --> BandWidth_SWB #3 --> BandWidth_FB #4 --> BandWidth_NB_WB #5 --> BandWidth_NB_SWB #6 --> BandWidth_NB_FWB #7 --> BandWidth_MAX Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:ImsVoiceSessionTimerConfig] #This config is required to configure the session refresher shall #be UAC/UAS. #Possible enum values are as follows: #QP_CONFIG_SES_REFRESHER_UAC =0, UAC will go out as the refresh parameter in the initial Refresh Request #QP_CONFIG_SES_REFRESHER_UAS =1, UAS will go out as the refresh parameter in the initial Refresh Request #QP_CONFIG_SES_REFRESHER_UNKNOWN =2 UNKNOWN sessionRefresherType = QP_CONFIG_SES_REFRESHER_UAC #This config is required to enable session timer support. sessionTimerEnabled = 1 #This config is required to enable Stand Alone Session Expiry #negotiation. standAloneEnabled = 1 #This config is required to enable Sesssion Expiry timer #negotiation. allowSeNegotiation = 0 #This config is required to configure the method for session #referesh shall be REINVITE/UPDATE. #Possible enum values are as follows: #QP_CONFIG_SES_REFRESH_UNKNOWN = -1, UNKNOWN #QP_CONFIG_SES_REFRESH_INVITE, INVITE will be the refresh method used #QP_CONFIG_SES_REFRESH_UPDATE sessionRefresherMethod = QP_CONFIG_SES_REFRESH_UPDATE [QIPCALL:ImsVoiceConfig] #This config is required to configure the Emergency call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network emergencyCallCancelTimer = 500 #This config is required to configure the default WPS invite duration. wpsInviteDuration = 0 #This config is required to enable 380 response validation as per #3GPP. enableAlternateSrvRspCheck = 1 #This config is required to set the display text priority #subscription. displayTextPriority = 3 #This config is required to include MTT USSD feature tag into IMS registration. ussdAcceptContact = "+g.3gpp.nw-init-ussi" #This config is required to configure the default invite retry counter. inviteRetryCounter = 5 #This config is required to select the default emergency URI if sub category matches with multiple entries e911SelectDefURI = 0 #This config is required to configure Call Waiting indication to UI enableCWI = 1 #This config is required to disable early media timer. disableEarlyMediaTimer = 0 #This config is required to configure the voice call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network voiceCallCancelTimer = 0 #This config is required to place AMR WB before AMR in encryption call. preferAMRWBinEncryptionCall = 0 #This config is required to enable PEM header in 183. enablePEMHeaderIn183 = 0 #This config is required to configure the default URI type #(SIP/TEL) for MO calls. #Possible INTEGER values for the enum are as follows: #QPE_IMS_URI_INIT = 0, enum value 0 #QPE_IMS_URI_SIP = QPE_IMS_URI_INIT, enum value 0 #QPE_IMS_URI_TEL, enum value 1 #QPE_IMS_URI_ANY, enum value 2 #QPE_IMS_URI_MAX enum value 3 uriType = QPE_IMS_URI_TEL #This config is required to configure the enabling of sending REINVITE #during Active calls HO. reInviteonHOforActiveCalls = 0 #This config is required to accommodate Network issue with symmetric payload for both TX/RX stream from Remote UE supportSymmetricPTforTxRx = 0 #This config is required to configure the terminating identity presentation or restriction type. terminatingIdentityService = 0 #This config is required to configure the default WPS fallback duration. wpsFallbackDuration = 0 #This config is required to enable the playing of local hold tone. enableLocalHoldTone = 0 #This config is required to configure the ignoring of AS value ignoreASValidation = 0 #This config is required to disable the default jitter buffer config disableDefaultJBConfig = 0 #This config is required to configure the max-red value max_red = 0 #This config is required to set error code for CT submode. sessionEndResponseTimeout = 0 #This config is required to enable VoWIFI Call Continuity to LTE NonVOPS. enableVCCtoLTENonVOPS = 0 #This config is required to configure the default invite retry duration. inviteRetryDefDuration = 8000 #This config is required to enable the propagation of multiple 180 to UI. enableMultiple180PropagationToUI = 0 #This config is required to enable emergency call operation in CS-only mode. emergCallCSOnly = 0 #This config is required to configure number format during roaming, geo-local/home-local #The possible INTEGER values for this enum are as follows: #QPE_IMS_PHONE_CONTEXT_GEO_LOCAL = 0, #QPE_IMS_PHONE_CONTEXT_HOME_LOCAL = 1 phoneContextPolicy = QPE_IMS_PHONE_CONTEXT_GEO_LOCAL #This config is required to decide whether AMR BE fallback needs to be disabled disableAMRBEFallBack = 1 #This config is required to consider a Normal call for end on Re-Reg Failure. #e911 calls are by default allowed to continue till network tears it down. endCallOnReRegFailure = 0 #This config is required to set reason Header Type. reasonHeaderCustomizationType = 0 #This config is required to enable Call end on RTP inactivity. CallEndonRTPInactivity = 0 #This config is required to set the phone context domain source. #Possible INTEGER values for this enum are as follows: #QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_MCC_MNC = 0, #QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_PAU_HEADER = 1, #QPE_IMS_PHONE_CONTEXT_SOURCE_PRE_DEFINED = 2, PhoneContextSource = QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_MCC_MNC #This config is required to set preconditions enabled with qos events ignored. ignoreQOSEvents = 0 #This config is required to enable the MT USSI. enableMTUSSI = 1 #This config is required to configure the privacy type. Set 0: for none, 1: for id, 2: for header. privacyType = 2 #This config is required to retain local SDP direction when incoming message has no PEM header. PEMRetainLocalDirOnPeerNone = 0 [Registration:RegistrationDefaultParams] #This config item will be used to configure default UserName to register with Network userName = "" #This config item will be used to configure default authType to register with Network authType = "" #This config item will be used to configure default Display Name to register with Network displayName = "" #This config item will be used to configure default DomainName to register with Network domainName = "" #This config item will be used to configure default authSecertKey authSecertKey = "" #This config item will be used to configure default Private URI to register with Network privateURI = "" #This config item will be used to configure default is3GPP is3GPP = 0 #This config item will be used to configure default Realm to register with Network realm = "" #This config item will be used to configure default public URI to register with Network publicURI = "" #This config item will be used to configure default Password to register with Network password = "" [QIPCALL:ImsVoiceSuppsConfig] #This config is required to configure the timer for Notify #response to Refer. notifyReferRspTimer = 20 #This config is required to end the conference call automatically #when all other participants left the call. endConfCallUponNoParticipant = 0 #This config is required to enable presentation of the call to #the user when UE is already in two calls (active and held). presentThirdCalltoUser = 1 #This config is required to skip dialing out status participent from adding in conference list. skipDialingOutStatus = 0 #This config is required to configure the conference event #package subscription timer. confEvtSubTimer = 3600 #This config is required not to send unsubscribe to NW for conference call when there is #no notify-terminated received. isUnsubcribeDisabled = 0 #This config is required to configure the dialog for the #conference event subscribe request. confEvtSubOutOfDialog = 1 #This config is required to configure the three party conf URI #for KDDI. threePartyConfFactoryUri = "" #This config is required to end the conference call automatically #when user-count node in the CEP XML is 1. endConfCallBasedOnUserCountNode = 0 #This config is required to enable the conference event package #subscription. #Possible enum values are as follows: #QPE_IMS_CONF_PCKG_NONE = 0, #QPE_IMS_CONF_PCKG_ALL = 1, #QPE_IMS_CONF_PCKG_ORIGINATOR_ONLY = 2, #QPE_IMS_CONF_PCKG_ORIGINATOR_ONLY_NO_JOIN_IND = 3, #QPE_IMS_CONF_PCKG_PARTICIPANT_NO_SUBSCRIBE_NO_INDICATION = 4 confEvtPakageEnabled = QPE_IMS_CONF_PCKG_ORIGINATOR_ONLY [QIPCALL:ImsRtcpXRConfig] #This config is required to enable RTCP-XR support. rtcpXrEnabled = 0 [SMSDAN:DANSettings] #This config item controls QIPCall 1x SMS and Voice Enabled (0:DAN SMS can be sent only if there is no voice call. #1:Enabled; DAN and MO SMS can be sent even when a voice call is up). smsAndVoiceOver1x = 0 #This NV item is used for configuring the transport channel preference on which DAN is to be sent. channelPreference = 0 #This config item controls the DAN Retry Timer Interval Duration (In ms) retryTimer = 0 #This config item controls the DAN Max Retry Counter maxRetryCount = 0 #This NV item is used for controlling DAN Hysterisis Timer Duration hysterisisTimer = 0 [QIPCALL:H263_0] #payload type number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationCounters] #This config item controls the Immediate Retry timer for failures maxPDNIntermediateRetries = 1 [QIPCALL:ImsVideoConfig] #This config is required to set the hold_downgrade_supported for VT #calls. hold_downgrade_supported = 0 #This config is required to configure the LTR mode. #Possible enum values are as follows: #/** Always disabled */ #QP_CONFIG_IMS_LTR_DISABLED = 0x00, #/** Only enable for qc to qc devices negotiated via SDP */ #QP_CONFIG_IMS_LTR_ENABLED_RESTRICT_QC = 0x01, #/** Always enabled */ #QP_CONFIG_IMS_LTR_ENABLED_ALL = 0x02, ltrMode = QP_CONFIG_IMS_LTR_DISABLED #This config is required to configure if VT capability can be impacted by modile data. vtImpactedByMobileData = 0 #This config is required to set the video_capability_for_invite_no_sdp for #incoming INVITE without SDP. video_capability_for_invite_no_sdp = 1 #Internal:This config is required to store peer supported #services trackPeerServices = 1 [SIPConfig:Transport] #above this size choose TCP and value 0 means disable tcp port open on UE TCPThresholdValue = 1300 #enable or disable TCP Static threshold TCPEnableStaticThreshold = 0 [SIPConfig:StandardTimers] #sip registration expires value in milliseconds SipRegValue = 600000 #sip reg subscription expires value in milliseconds SipSubscribeValue = 600000 [SIPConfig:IPSec] #integrity scheme for ipsec sip messages #Possible INTEGER values for override Integrity Algorithm mask values are as follows: #0 --> Invalid - none of the algorithm is supported #1 --> alg=hmac-sha-1-96 #2 --> alg=hmac-md5-96 #3 --> alg=hmac-sha-1-96 and alg=hmac-md5-96 IntScheme = 3 #encryption algo for ipsec sip messages #Possible INTEGER values for override Encryption Algorithm mask values are as follows: #0 --> Invalid - none of the algorithm supported #1 --> ealg=null; #2 --> ealg=aes-cbc; #3 --> ealg=null; ealg=aes-cbc; #4 --> ealg=des-ede3-cbc; #5 --> ealg=des-ede3-cbc; ealg=null; #6 --> ealg=des-ede3-cbc; ealg=aes-cbc; #7 --> ealg=des-ede3-cbc; ealg=aes-cbc; ealg=null; EncAlgo = 7 [IMS_COMMON:ImsCommonTestModeCellId] #This config item controls the test mode value #eCELLID_TEST_MODE_OFF 0 #eCELLID_TEST_MODE_ON 1 CellID_Test_Mode = 0 #This config item controls the Cell ID value CellID = "" [SMSDAN:SMSSettings] #This config item used to configure the error code and used while reject Incoming MT sms while NAS is busy in service one SMS. IncomingSmsRejectCode = 400 #This config is required to enable addition of Accept-contact header field in MO SMS. smsAcceptContactEnabled = 0 #This config item controls the SMS Feature tag smsAcceptContact = "+g.3gpp.smsip" #This config item used to enable or disable feature of rejecting incoming SMS when IMS is already processing a SMS. EnableIncomingSmsRejectFeature = 0 [MEDIA:MediaCommon] #This config item specifies if overall rate adaptation feature is enabled or not. audioRAEnable = 1 #This config item specifies if NO_DATA format rtp pkts send is enabled or not. rtpNoDataSend = 0 #This config item specifies maximum mtu size for the rtp packet mtuSize = 1400 #This config item specifies packet exchange mode. #enum: #/** use OOB mode. In VS arch it will be same as mode 4*/ #QP_OOB_MODE = 0, #/** use mailbox mode and CDRX length from ML1. #Sync ADSP with CDRX ref time all the time i.e. at the beginning of the call #as well as any resync at the middle of the call */ #QP_MB_FULL_CDRX_FULL_SYNC = 1, #/** use mailbox mode and default CDRX length to 20ms. #Sync ADSP with CDRX ref time at the beginning of the call #and disable any sync at the middle of the call */ #QP_MB_CDRX_20_SYNC_ONCE = 2, #/** use mailbox mode and CDRX length from ML1. #Sync ADSP with CDRX ref time at the beginning of the call #and disable any sync at the middle of the call */ #QP_MB_FULL_CDRX_SYNC_ONCE = 3, #/** use mailbox mode and use it as CDRX disabled #i.e. default CDRX length to 20ms and no sync with CDRX at all */ #QP_MB_DISABLE_CDRX_SYNC = 4, enableMailbox = QP_MB_FULL_CDRX_FULL_SYNC [Registration:RegistrationSettings] #This config item controls Registration over IWLAN in airplane mode #Possible INTEGER values for override are as follows: #QPE_ENABLE_REG_INLPM_INVALID = 0 --> Reserved, Not to be used. #QPE_ENABLE_REG_INLPM_OFF = 1 --> Registration is not on IWLAN as well enabled during LPM ON. #QPE_ENABLE_REG_INLPM_ON = 2 --> Registration is enabled on IWLAN during LPM ON. enableRegistrationInLPM = 2 #This config item controls PCSCF IP fallback feature pcscfBasedIPFallback = 1 #This config item controls TTY over IMS enableTTYOverIMS = 0 #This config item controls Reregistration over WIFI during Activate 3G call #Possible INTEGER values for override are as follows: #eQP_IMS_REG_OVER_WIFI_WHILE_ACTIVE_GSM_CALL_DISABLED = 0 --> Reg over WiFi is enabled by default irrespective of calls. #eQP_IMS_REG_OVER_WIFI_WHILE_ACTIVE_2G_3G_CALL = 1 --> Reg over WiFi is blocked during 2G/3G calls #eQP_IMS_REG_OVER_WIFI_WHILE_ACTIVE_3G_CALL_ONLY = 2 --> Reg over WiFi is blocked only during 3G calls #eQP_IMS_REG_OVER_WIFI_WHILE_ACTIVE_2G_CALL_ONLY = 3 --> Reg over WiFi is blocked only during 2G calls BlockRegOverWifiWhileActiveCSCall = 0 #This config item controls Reregistration over WIFI during Activate 1x call BlockRegOverWifiWhileActive1XCall = 0 [Ut:XcapHCConfigUserProfile] #This config item controls the configured user name configUserName = "" #This config item controls the configured user name configUserPassword = "" [DPL:Common] #This config is used to enable/disable Dynamic UserAgent update DisableUserAgentUpdate = 0 #Timer Var to delay in sending ISIM STATUS after initialization ISIMStatusTimerVar = 5 #This config item determines usage to read the SIM card parameters (ISIM, USIM ) etc #Possible INTEGER values for override are as follows: #QPE_CONFIG_IMS_FILE_READ = 0 --> File Read Param Source #QPE_CONFIG_IMS_NV_READ = 1 --> NV Read Param Source #QPE_CONFIG_IMS_CARD_READ = 2 --> Card Read Param Source to read from ISIM #QPE_CONFIG_IMS_FILE_READ_AUTH_ENABLED = 3 --> File Read Param Auth enabled (ONLY for testing) #QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED = 4 --> USIM fallback enabled ParamSrc = QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED [QIPCALL:ImsMediaProfileConfig] #This config is required to video codec profile list on 4G. VideoProfile1 = "H264_2;H264_1;H264_0" #This config is required to audio codec profile list. AudioProfile1 = "EVS_0_126;EVS_1_127;AMR_4_104;AMR_1_99;AMR_2_103;AMR_0_97" [QIPCALL:ImsVoWifiConfig] #This config is required to configure the information to be passed #in P-Emergency-Info header. PEIHeaderInfoForEmergency = 0 #This config is required to configure the wifi connectivity #backoff timer. wifiConnectivityBackoffTimer = 10 #This config is required to configure the 380 handling for Emergency calls #Possible values are: #0 -> Default behaviour present in the code #1 -> Force CSFB #2 -> Send Permanent failure Handling380forEmergency = 0 #This config is enable RAT measurements of PDN bring-up / HO cases for Verizon in home network for idle cases. bEnableVzwIdleHomeMeasurements = 0 [MEDIA:MediaDscp] #This config item specifies dscp value for audio audio = 60 #This config item specifies dscp value for video video = 45 [QIPCALL:ImsVideoModifyConfig] #This config is required to configure the timer in msecs for #waiting on user response to the incoming upgrade req. localUpgradeAcceptTimer = 15000 #This config is required to configure the timer in secs for #response from the peer to the sent upgrade req. remoteUpgradeRejectTimer = 40 [QIPCALL:ImsEmergencyConfig] #This config is required to configure the timer for dedicated #bearer allocation for E911 call. emerQosReservationTimer = 8000 #This config is required to configure whether UE needs to end e911 call based on RTP/RTCP timeout for audio KeepE911CallOnAudioRTPRTCPTimeOut = 0 [SIPConfig:CustomTimers] #reliable response retry timer cap in milliseconds TRelResponseRetry = 0 "

efs:/google (3)

efs:/google/paris_version = "g670_default_32_201910022029 "
efs:/google/cust_ims_ua_enable = 1
efs:/google/user_agent_template = "Google_[MI__ap]_[SW__ap]"

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -118; LTEDLRSRPThresholdTargetHigh = -115; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 2; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; VQIndicationEnabled = 1; WLANPERIODICPINGTIMER = 30; PingServer = fqdn : 1#www.google.com; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -15; WCDMA_TRAT_ECIO_Threshold = -10; WCDMA_SRAT_RSCP_Threshold = -115; WCDMA_TRAT_RSCP_Threshold = -110; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -125; LTE_RSRP_Single_in = -130; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -200; LTE_SNR_Single_out = 70; LTE_SNR_Single_in = 0; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/data/3gpp (1)

3GPP MTUlikely = 1400
Default PDN MTU in bytesefs:/nv/item_files/data/3gpp/ds_3gpp_mtu

efs:/nv/item_files/data/3gpp2 (1)

ehrpd_partial_contextunverified = 2576980377700x3c0000000a
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/3gpp2/ehrpd_partial_context

efs:/nv/item_files/data/wlan_config (1)

wlan_offload_configunverified = 2
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wlan_offload_config

efs:/nv/item_files/datamodem/protocols (1)

efs:/nv/item_files/datamodem/protocols/ip6_include_rdnss_opt = 1

efs:/nv/item_files/gps/cgps/sm (1)

gnss_lpp_enableunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lpp_enable

efs:/nv/item_files/ims (24)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 1= Enabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 2
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item

efs:/nv/item_files/modem/1x (2)

efs:/nv/item_files/modem/1x/zz2_2_sel_parms = 0000081effffffff
efs:/nv/item_files/modem/1x/zz2_2_thresh = 009c80ffa188ff00

efs:/nv/item_files/modem/data/3gpp/dsmgr (1)

emergency_apn_typeunverified = 1310730x20001
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/dsmgr/emergency_apn_type

efs:/nv/item_files/modem/data/3gpp/lteps (1)

disable_apn_matchingunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/lteps/disable_apn_matching

efs:/nv/item_files/modem/data/3gpp/ps (1)

modem_def_prof_supportunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/modem_def_prof_support

efs:/nv/item_files/modem/data/dsmgr (1)

monitor_flow_timerunverified = 1281
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/dsmgr/monitor_flow_timer

efs:/nv/item_files/modem/hdr/mac (1)

hdr_dtx_cfgunverified = 0
EV-DO setting: CDMA EV-DO (HDR) MAC / searchefs:/nv/item_files/modem/hdr/mac/hdr_dtx_cfg

efs:/nv/item_files/modem/hdr/srch (3)

hdr_acq_div_enableunverified = 1
EV-DO setting: CDMA EV-DO (HDR) MAC / searchefs:/nv/item_files/modem/hdr/srch/hdr_acq_div_enable
hdr_acq_div_thresh0unverified = 65441
EV-DO setting: CDMA EV-DO (HDR) MAC / searchefs:/nv/item_files/modem/hdr/srch/hdr_acq_div_thresh0
hdr_acq_div_thresh1unverified = 65436
EV-DO setting: CDMA EV-DO (HDR) MAC / searchefs:/nv/item_files/modem/hdr/srch/hdr_acq_div_thresh1

efs:/nv/item_files/modem/lte/rrc/cap (2)

diff_fdd_tdd_fgi_enableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/diff_fdd_tdd_fgi_enable
mdt_r10_feature_disableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/mdt_r10_feature_disable

efs:/nv/item_files/modem/lte/rrc/cep (1)

conn_control_v2_enableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cep/conn_control_v2_enable

efs:/nv/item_files/modem/lte/rrc/csp (2)

band_priority_listunverified = 3284880x50328
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/csp/band_priority_list
band_priority_list_v2unverified = 3284880x50328
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/csp/band_priority_list_v2

efs:/nv/item_files/modem/mmode (12)

Voice domain preference = 3= IMS PS voice preferred
E-UTRAN voice domain (TS 24.301 9.9.3.44)efs:/nv/item_files/modem/mmode/voice_domain_pref
UE usage settinglikely = 0= Voice centric
TS 24.301 UE usage settingefs:/nv/item_files/modem/mmode/ue_usage_setting
e911_prioritize_psunverified = 1
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/e911_prioritize_ps
SMS domain preference = 1= PS (IMS) SMS preferred
SMS over IMS preferenceefs:/nv/item_files/modem/mmode/sms_domain_pref
SMS mandatorylikely = 1= On
SMS is mandatory for the device (block LTE if IMS/SGs SMS registration fails)efs:/nv/item_files/modem/mmode/sms_mandatory
supplement_service_domain_prefunverified = 3
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/supplement_service_domain_pref
ue_based_cwunverified = 0
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/ue_based_cw
wifi_configunverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/wifi_config
skip_gwt_scan_during_rlfunverified = 256
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/skip_gwt_scan_during_rlf
custom_emerg_infounverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/custom_emerg_info
emcall_to_voice_callunverified = 0
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/emcall_to_voice_call
LTE band preferencelikely = ffffffffff7fffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref

efs:/nv/item_files/modem/mmode/sd (3)

full_srv_req_in_emerg_extunverified = 0
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/sd/full_srv_req_in_emerg_ext
full_srv_req_in_emergunverified = 0
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/sd/full_srv_req_in_emerg
sdssscr_timersunverified
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/sd/sdssscr_timers
…

efs:/nv/item_files/modem/nas (4)

EMM NAS itemslikely =
32-byte EMM configuration blobefs:/nv/item_files/modem/nas/emm_nas_nv_items
exclude_ptmsi_type_fieldunverified = 1
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/exclude_ptmsi_type_field
map_cause7_to_cause14unverified = 1
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/map_cause7_to_cause14
SRVCC support = 0= Off
SRVCC capability indication from E-UTRAN to UTRAN (TS 23.216)efs:/nv/item_files/modem/nas/nas_srvcc_support

efs:/nv/item_files/modem/uim/gstk (1)

feature_bmskunverified = 0
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/gstk/feature_bmsk

efs:/nv/item_files/modem/uim/mmgsdi (2)

features_status_listunverified =
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/mmgsdi/features_status_list
refresh_vote_okunverified = 1
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/mmgsdi/refresh_vote_ok

efs:/pdp_profiles/consl_profiles (2)

efs:/pdp_profiles/consl_profiles/rmnet_call_prof_num = 3
efs:/pdp_profiles/consl_profiles/socks_call_prof_num = 3

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

efs:/sd (1)

efs:/sd/rat_acq_order =

nv (25)

Bannerlikely = "Reliance"
nv:71
Band Class Preferencelikely = No value
nv:441
Band preference bits 16-31 = No value
Expand Band Preference 16 To 32 Bitsnv:946
Bits 32 To 63 Of Band Preflikely = No value
nv:2954
SMS MO Retry Periodlikely = 135
nv:3532
SMS MO Retry Intervallikely = 30
nv:3533
CS TO VOIP Fallback Timerlikely = 10
nv:6830
VOIP Cancel Retry Timerlikely = 10
nv:6831
Mode preference = 4= Automatic
Digital/Analog Mode Preferencenv:10
Disable CM Call Typelikely = 0
nv:5280
GSM/UMTS Cell Broadcast SMS Service Table Sizelikely = 2
nv:1015
GSM/UMTS Cell Broadcast SMS Service Tablelikely
nv:1014
ActiveService = 0
ServiceFrom = 4352
ServiceTo = 4359
Selected = 0
Label = 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
LabelEncoding = 0
BcAlert = 0
MaxMessages = 0
GSM/UMTS Cell Broadcast SMS Service Tablelikely
nv:1014/1
ActiveService = 0
ServiceFrom = 4370
ServiceTo = 4382
Selected = 0
Label = 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
LabelEncoding = 0
BcAlert = 0
MaxMessages = 0
GSM/UMTS Cell Broadcast SMS Carrier Configurationlikely = 1
nv:1016
GSM/UMTS Cell Broadcast SMS User Preferencelikely = 2
nv:1017
ENS Enabledlikely = 0= Off
Enhanced Network Selectionnv:3461
SMS Service Optionlikely = 1
nv:4366
Toolkit CS PS Parallellikely = 0
nv:5770
UIM First Instruction Classlikely = 1
nv:896
RRC Integrity Enabledlikely = 1
nv:880
RRC Ciphering Enabledlikely = 1
nv:881
RRC Fake Security Enabledlikely = 0
nv:882
IPv6 enabled = 0= Off
Ipv6 Enablednv:1896
Authentication Require Password Encryptionlikely = 0
nv:1907
eHRPD Authentication Modelikely = 1
nv:6862

Vodafone_IN in the Qualcomm modem firmware of SP2A.220505.008.

Header
MCFG version08015e04
LabelVodafone_IN
Version045e0108
Base version005e0108
Capability04000000
Digest´ˆ³. ±¯Vpi‰‘VÙ?%ºF)i&Ê69æ´ÞöŸ
Trailer version0001
Selected by (23)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC40420any SIM
MCC-MNC40405any SIM
MCC-MNC40411any SIM
MCC-MNC40430any SIM
MCC-MNC40486any SIM
MCC-MNC40484any SIM
MCC-MNC40413any SIM
MCC-MNC40488any SIM
MCC-MNC40567any SIM
MCC-MNC40566any SIM
MCC-MNC40415any SIM
MCC-MNC40401any SIM
MCC-MNC40460any SIM
MCC-MNC40467any SIM
MCC-MNC40427any SIM
MCC-MNC40443any SIM
MCC-MNC405753any SIM
MCC-MNC405751any SIM
MCC-MNC405756any SIM
MCC-MNC405752any SIM
MCC-MNC405755any SIM
MCC-MNC405754any SIM
MCC-MNC405750any SIM
Settings (87)

efs:/data (5)

ds_dsd_attach_profile.txtunverified = "Attach_Profile_ID:1;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_dsd_attach_profile.txt
iwlan_s2b_config.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/iwlan_s2b_config.xml
ds_andsf_config.txtunverified = "andsf_rule_mgr_active:1; lte_meas_alpha:50; lte_sampling_interval:1000; lte_avg_interval:5000; wifi_meas_alpha:65; wifi_sampling_interval:1000; wifi_avg_interval:5000; cdma_1x_meas_alpha:50; cdma_1x_avg_interval:6000; cdma_1x_acq_hyst_interval:3000; cdma_1x_lost_hyst_interval:3000; cdma_1x_sampling_interval:2000;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_andsf_config.txt
Default ANDSFlikely =
ANDSF Wi-Fi/cellular steering policy (TS 24.312)efs:/data/default_andsf.xml
andsf.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/andsf.xml

efs:/Data_Profiles (3)

efs:/Data_Profiles/Profile1 =
efs:/Data_Profiles/Profile2 =
efs:/Data_Profiles/Profile3 =

efs:/efsprofiles (1)

efs:/efsprofiles/overideconfig = " [SIPConfig:GeoLocation] #enable or disable location info inclusion in regular calls iEnableCellInfoInPANI = 0 #enable or disable location info inclusion in regular calls iEnableLocInfoInNormalCall = 0 #enable or disable location info inclusion in emergency calls iEnableLocInfoInEmergencyCall = 1 #to set the threshold for uncertainty validation fUnCertaintyThreshold = 0.0 [QIPCALL:H264_2] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 7 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 117 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 118 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 384 #Preffered bitrate bitrate_preferred = 384 #Min Bitrate bitrate_min = 192 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 960 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_1] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 11 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 115 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 8 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 116 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 768 #Preffered bitrate bitrate_preferred = 768 #Min Bitrate bitrate_min = 384 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 4032 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_0] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 13 #Preffered Framerate framerate_preferred = 30 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 113 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 10 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 114 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 2048 #Preffered bitrate bitrate_preferred = 2048 #Min Bitrate bitrate_min = 768 #Max Framerate framerate_max = 30 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 16320 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:EVS_0] #channel aware setting ch_aw_recv = -1 #This config is used for hf only hf_only = 0 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. It has to be in DECIMAL format. BitRate = 120 [QIPCALL:EVS_1] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. BitRate = 120 [QIPCALL:EVS_2] #channel aware setting ch_aw_recv = -1 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [SMSDAN:USSDSettings] #This config item controls the Language String to be used. ussdLangString = "" [QIPCALL:H265_2] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationTimers] #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for SSIM device wlanGaurdTimer = 7 #This config item controls the Register configuration for the network-initiated De reg Timer value. networkInitiatedDeRegistrationTimer = 60 #This config item controls the Retry timer for permanent PDP failures pdnRetryLongTimer = 10 #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for MSIM device wlanGaurdTimerMSIM = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for SSIM device wwanGaurdTimer = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for MSIM device wwanGaurdTimerMSIM = 10 #This config item controls the Retry timer for temporary failures pdnRetryShortTimer = 60 [QIPCALL:H265_0] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [QIPCALL:H265_1] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Ut:UtConfiguration] #This config is required to configure the server responses for which UT is to be blocked permanently BlockUtResponseCodes = "" #This config item controls the media element type for Call Barring Service. 0:No media tag support, 1:One media tag per media type, 2: include both audio and video tags mediaElementSupportForCB = 0 #This config item specifies if the realm is to trimmed or not. 0:Not enabled(default), 1:enabled isTrimRealmEnabled = 0 #This config item specifies if IR92v10 is enabled or not. 0:Not enabled(default), 1:enabled isIr92V10Enabled = 0 #This config item controls the time for which the PDN needs to be kept Active after a SS request is completed pdnHysTimerValue = 0 #This config item controls the Maximum time within which a Response should be sent to UI maxResponseTimerValue = 12 #This config item controls the action item when there is no SIB value for CB request. 0:Default, 1:Reject, 2:Audio Only, 3:Both Audio and Video emptySIBUsageForCB = 0 #This config item controls the action item. When a rule id is not present in a server xml, a request is not allowed. It is used on VDF-Portugal only now. 0:Not to check a rule ID(Default), 1:Block a request when rule ID is not present in a server xml blockIfRuleIDAbsent = 0 [SIPConfig:FeatureFlags] #enable or disable sip instance inclusion in contact header IsSipInstanceNeeded = 1 #enable or disable Cellular-Network-Info header IsCNIEnabled = 1 #enable or disable header compact form IsCompactFormEnabled = 1 #enable or disable IsUIReadyStatusCheckNeeded IsUIReadyStatusCheckNeeded = 0 #disable StopTimerBon1xx once 1xx response is not received StopTimerBon1xx = 0 #enable or disable IsImsiNeededForContactHeader IsImsiNeededForContactHeader = 0 [QIPCALL:ImsVoiceSrvccConfig] #This config is required to enable bSRVCC. *bSrvccEnabled = 1 #This config is required to enable aSRVCC. *aSrvccEnabled = 1 #This config is required to enable mid call SRVCC. *midcallSrvccEnabled = 1 [QIPCALL:ImsRtcpConfig] #This config is required to configure the RR bandwidth for Video. rrForVideo = 2000 #This config is required to configure the timer for RTCP #monitoring. rtcpLinkAlivenessTimer = 25 #This config is required to configure the RS bandwidth for Audio. rsForAudio = 600 #This config is required to disbale/enable the RTCP monitoring. disableRTCPMonitoring = 0 #This config is required to configure the timer for RTCP #Reporting in VT call. rtcpReportingIntervalInVideo = 1 #This config is required to configure the RS bandwidth for Video. rsForVideo = 600 #This config is required to configure the RR bandwidth for Audio. rrForAudio = 2000 [QIPCALL:AMR_4] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:G711_2] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMA [QIPCALL:G711_1] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:G711_0] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:AMR_0] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_1] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_2] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:AMR_3] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:ImsVoiceQoSConfig] #This config is required to enable sending SDP answer in PRACK #for 183 if the local qos is granted before 183 response is recvd by #the UE. qosOptimization = 0 #This config is required to configure the timer for dedicated #bearer allocation. qosReservationTimer = 8000 #This config is required to enable set the desired qos strength #for local and remote UEs. qosDesiredStrength = 1 #This config is required to enable 183 for Reneg qosMc183 = 0 #This config is required to configure if the UE must wait for #video dedicated bearer allocation during call setup. localQosResReqVideo = 1 #This config is required to configure if the UE must wait for #text dedicated bearer allocation during call setup. localQosResReqText = 1 #This config is required to enable/disable video CRBT feature VideoCRBT = 0 #This config is required to configure the early QoS timer for video dedicated #bearer allocation. earlyQosReservationTimer = 0 #This config is required to enable Qos precondition negotiation #in SDP. qosPreconditionsEnabled = 0 #This config is required to enable Qos MC precondition negotiation #in SDP. qosMcPreconditionsEnabled = 0 #This config is required to configure the MBR threshold. iMBRthresholdValue = 0 #This config is required to configure if the UE must wait for #audio dedicated bearer allocation during call setup. localQosResReqAudio = 1 #This config is required to configure if the initial SDP #directionality should be inactive in REINVITE when preconditions are #used reinviteSdpDirInactive = 0 #This config is required to enable MBR check for video bearer. qosMbrVideoCheckReqEnabled = 1 #This config is required to configure if the initial SDP #directionality should be inactive when preconditions are used. inviteSdpDirInactive = 0 #This config is required to enable MBR check for audio bearer. qosMbrAudioCheckReqEnabled = 0 #This config is required to enable QCI match with the requested media type for qos checkQciForQoSMediaType = 0 #This config is required to enable mid-call precondition for Call Hold/Resume qosMcHold = 0 [Ut:XCAPCommonHC] #This config item controls the configuration of BSF server address bsfServerAddress = ":7080" #This config item controls whether GBA_U is enabled or not useGBAMEOnly = 0 #This config item controls whether ims prefix is added or not for Ub request like as bsf.ims.mnc005.mcc232.pub.3gppnetwork.org includeIMSPrefixForUSIM = 0 #This config item controls whether BSF server supports TLS bsfServerTlsSupport = 0 [Registration:RegistrationFeatureFlags] #This config item specifies if the sub operator is APTG and special handling is required for Options unsubscribed error or not. 0:Not enabled(default), 1:enabled optionsUnsubscribedSpecialHandling = 0 #This config item controls whether need to reset AWT timer. notResetAWTTimerEnable = 0 [QIPCALL:EVS_3] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:ImsVoiceSessionTimerConfig] #This config is required to configure the session refresher shall #be UAC/UAS. sessionRefresherType = QP_CONFIG_SES_REFRESHER_UAC #This config is required to enable session timer support. sessionTimerEnabled = 1 #This config is required to enable Stand Alone Session Expiry #negotiation. standAloneEnabled = 1 #This config is required to enable Sesssion Expiry timer #negotiation. allowSeNegotiation = 0 #This config is required to configure the method for session #referesh shall be REINVITE/UPDATE. sessionRefresherMethod = QP_CONFIG_SES_REFRESH_UPDATE [QIPCALL:ImsVoiceConfig] #This config is required to configure the Emergency call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network emergencyCallCancelTimer = 500 #This config is required to configure the default WPS invite duration. wpsInviteDuration = 0 #This config is required to enable 380 response validation as per #3GPP. enableAlternateSrvRspCheck = 1 #This config is required to set the display text priority #subscription. displayTextPriority = 3 #This config is required to include MTT USSD feature tag into IMS registration. ussdAcceptContact = "+g.3gpp.nw-init-ussi" #This config is required to configure the default invite retry counter. inviteRetryCounter = 5 #This config is required to select the default emergency URI if sub category matches with multiple entries e911SelectDefURI = 0 #This config is required to disable early media timer. disableEarlyMediaTimer = 0 #This config is required to configure the voice call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network voiceCallCancelTimer = 0 #This config is required to place AMR WB before AMR in encryption call. preferAMRWBinEncryptionCall = 0 #This config is required to enable PEM header in 183. enablePEMHeaderIn183 = 0 #This config is required to configure the default URI type #(SIP/TEL) for MO calls. uriType = QPE_IMS_URI_TEL #This config is required to configure the enabling of sending REINVITE #during Active calls HO. reInviteonHOforActiveCalls = 0 #This config is required to configure the terminating identity presentation or restriction type. terminatingIdentityService = 0 #This config is required to configure the default WPS fallback duration. wpsFallbackDuration = 0 #This config is required to configure the ignoring of AS value ignoreASValidation = 0 #This config is required to configure the max-red value max_red = 0 #This config is required to set error code for CT submode. sessionEndResponseTimeout = 0 #This config is required to enable VoWIFI Call Continuity to LTE NonVOPS. enableVCCtoLTENonVOPS = 0 #This config is required to configure the default invite retry duration. inviteRetryDefDuration = 8000 #This config is required to enable emergency call operation in CS-only mode. *emergCallCSOnly = 1 #This config is required to configure number format during roaming, geo-local/home-local phoneContextPolicy = QPE_IMS_PHONE_CONTEXT_GEO_LOCAL #This config is required to enable Call end on RTP inactivity. CallEndonRTPInactivity = 0 #This config is required to set the phone context domain source. PhoneContextSource = QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_MCC_MNC #This config is required to set preconditions enabled with qos events ignored. ignoreQOSEvents = 0 #This config is required to enable the MT USSI. enableMTUSSI = 1 #This config is required to configure the privacy type. Set 0: for none, 1: for id, 2: for header. privacyType = 2 [Registration:RegistrationDefaultParams] #This config item will be used to configure default UserName to register with Network userName = "" #This config item will be used to configure default authType to register with Network authType = "" #This config item will be used to configure default Display Name to register with Network displayName = "" #This config item will be used to configure default DomainName to register with Network domainName = "" #This config item will be used to configure default authSecertKey authSecertKey = "" #This config item will be used to configure default Private URI to register with Network privateURI = "" #This config item will be used to configure default is3GPP is3GPP = 0 #This config item will be used to configure default Realm to register with Network realm = "" #This config item will be used to configure default public URI to register with Network publicURI = "" #This config item will be used to configure default Password to register with Network password = "" [QIPCALL:ImsVoiceSuppsConfig] #This config is required to configure the timer for Notify #response to Refer. notifyReferRspTimer = 20 #This config is required to end the conference call automatically #when all other participants left the call. endConfCallUponNoParticipant = 0 #This config is required to enable presentation of the call to #the user when UE is already in two calls (active and held). *presentThirdCalltoUser = 1 #This config is required to configure the conference event #package subscription timer. confEvtSubTimer = 3600 #This config is required not to send unsubscribe to NW for conference call when there is #no notify-terminated received. isUnsubcribeDisabled = 0 #This config is required to configure the dialog for the #conference event subscribe request. confEvtSubOutOfDialog = 1 #This config is required to configure the three party conf URI #for KDDI. threePartyConfFactoryUri = "" #This config is required to enable the conference event package #subscription. confEvtPakageEnabled = QPE_IMS_CONF_PCKG_ORIGINATOR_ONLY [QIPCALL:ImsRtcpXRConfig] #This config is required to enable RTCP-XR support. rtcpXrEnabled = 0 [SMSDAN:DANSettings] #This config item controls QIPCall 1x SMS and Voice Enabled (0:DAN SMS can be sent only if there is no voice call. #1:Enabled; DAN and MO SMS can be sent even when a voice call is up). smsAndVoiceOver1x = 0 #This NV item is used for configuring the transport channel preference on which DAN is to be sent. channelPreference = 0 #This config item controls the DAN Retry Timer Interval Duration (In ms) retryTimer = 0 #This config item controls the DAN Max Retry Counter maxRetryCount = 0 #This NV item is used for controlling DAN Hysterisis Timer Duration hysterisisTimer = 0 [QIPCALL:H263_0] #payload type number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationCounters] #This config item controls the Immediate Retry timer for failures maxPDNIntermediateRetries = 1 [QIPCALL:ImsVideoConfig] #This config is required to configure the LTR mode. ltrMode = QP_CONFIG_IMS_LTR_DISABLED #This config is required to configure if VT capability can be impacted by modile data. vtImpactedByMobileData = 0 #This config is required to set the video_capability_for_invite_no_sdp for #incoming INVITE without SDP. video_capability_for_invite_no_sdp = 1 #Internal:This config is required to store peer supported #services trackPeerServices = 1 [SIPConfig:Transport] #above this size choose TCP and value 0 means disable tcp port open on UE TCPThresholdValue = 1300 #enable or disable TCP Static threshold TCPEnableStaticThreshold = 0 [SIPConfig:StandardTimers] #sip registration expires value SipRegValue = 600000 #sip reg subscription expires value SipSubscribeValue = 600000 [SIPConfig:IPSec] #integrity scheme for ipsec sip messages IntScheme = 3 #encryption algo for ipsec sip messages EncAlgo = 7 [SMSDAN:SMSSettings] #This config item used to configure the error code and used while reject Incoming MT sms while NAS is busy in service one SMS. IncomingSmsRejectCode = 400 #This config item used to enable or disable feature of rejecting incoming SMS when IMS is already processing a SMS. EnableIncomingSmsRejectFeature = 0 #This config item controls the SMS Feature tag smsAcceptContact = "+g.3gpp.smsip" [MEDIA:MediaCommon] #This config item specifies if overall rate adaptation feature is enabled or not. audioRAEnable = 1 #This config item specifies maximum mtu size for the rtp packet *mtuSize = 1500 [Registration:RegistrationSettings] #This config item controls Registration over IWLAN in airplane mode enableRegistrationInLPM = 2 #This config item controls PCSCF IP fallback feature pcscfBasedIPFallback = 1 #This config item controls TTY over IMS enableTTYOverIMS = 0 #This config item controls Reregistration over WIFI during Activate 3G call BlockRegOverWifiWhileActiveCSCall = 0 #This config item controls Reregistration over WIFI during Activate 1x call BlockRegOverWifiWhileActive1XCall = 0 [Ut:XcapHCConfigUserProfile] #This config item controls the configured user name configUserName = "" #This config item controls the configured user name configUserPassword = "" [DPL:Common] #This config item determines usage to read the SIM card parameters (ISIM, USIM ) etc #Possible INTEGER values for override are as follows: #QPE_CONFIG_IMS_FILE_READ = 0 --> File Read Param Source #QPE_CONFIG_IMS_NV_READ = 1 --> NV Read Param Source #QPE_CONFIG_IMS_CARD_READ = 2 --> Card Read Param Source to read from ISIM #QPE_CONFIG_IMS_FILE_READ_AUTH_ENABLED = 3 --> File Read Param Auth enabled (ONLY for testing) #QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED = 4 --> USIM fallback enabled ParamSrc = QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED [QIPCALL:ImsMediaProfileConfig] #This config is required to video codec profile list on 4G. VideoProfile1 = "H264_2;H264_1;H264_0" #This config is required to audio codec profile list. AudioProfile1 = "AMR_4_104;AMR_1_99;AMR_2_103;AMR_0_97" [QIPCALL:ImsVoWifiConfig] #This config is required to configure the wifi connectivity #backoff timer. wifiConnectivityBackoffTimer = 10 [MEDIA:MediaDscp] #This config item specifies dscp value for audio audio = 60 #This config item specifies dscp value for video video = 45 [QIPCALL:ImsVideoModifyConfig] #This config is required to configure the timer in msecs for #waiting on user response to the incoming upgrade req. localUpgradeAcceptTimer = 15000 #This config is required to configure the timer in secs for #response from the peer to the sent upgrade req. remoteUpgradeRejectTimer = 40 [SIPConfig:CustomTimers] #reliable response retry timer cap TRelResponseRetry = 0 "

efs:/google (4)

efs:/google/paris_version = "g670_default_32_201910022029 "
efs:/google/cust_ims_ua_enable = 1
efs:/google/user_agent_template = "Google_[MI__ap]_[SW__ap]"
efs:/google/fd_timers.conf = 85899345940x200000002

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -118; LTEDLRSRPThresholdTargetHigh = -115; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 3; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -15; WCDMA_TRAT_ECIO_Threshold = -10; WCDMA_SRAT_RSCP_Threshold = -115; WCDMA_TRAT_RSCP_Threshold = -110; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -125; LTE_RSRP_Single_in = -118; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -170; LTE_SNR_Single_out = 75; LTE_SNR_Single_in = 85; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/data/wlan_config (1)

wlan_offload_configunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wlan_offload_config

efs:/nv/item_files/gps/cgps/sm (2)

gnss_lpp_enableunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lpp_enable
gnss_lppe_cp_configunverified = 19
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lppe_cp_config

efs:/nv/item_files/ims (24)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 1= Enabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 2
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item

efs:/nv/item_files/modem/data/3gpp/dsmgr (1)

emergency_apn_typeunverified = 1310730x20001
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/dsmgr/emergency_apn_type

efs:/nv/item_files/modem/data/3gpp/ps (1)

modem_def_prof_supportunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/modem_def_prof_support

efs:/nv/item_files/modem/lte/rrc (1)

PC2 whitelistunverified =
Bands allowed Power Class 2 (26 dBm)efs:/nv/item_files/modem/lte/rrc/PC2_WHITELIST.xml

efs:/nv/item_files/modem/lte/rrc/cap (2)

diff_fdd_tdd_fgi_enableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/diff_fdd_tdd_fgi_enable
mdt_r10_feature_disableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/mdt_r10_feature_disable

efs:/nv/item_files/modem/mmode (11)

SMS domain preference = 0= PS SMS not allowed
SMS over IMS preferenceefs:/nv/item_files/modem/mmode/sms_domain_pref
SMS mandatorylikely = 0= Off
SMS is mandatory for the device (block LTE if IMS/SGs SMS registration fails)efs:/nv/item_files/modem/mmode/sms_mandatory
Voice domain preference = 3= IMS PS voice preferred
E-UTRAN voice domain (TS 24.301 9.9.3.44)efs:/nv/item_files/modem/mmode/voice_domain_pref
ue_based_cwunverified = 0
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/ue_based_cw
custom_emerg_infounverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/custom_emerg_info
mid_call_srvcc_infounverified = 10995129077770x10000138801
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/mid_call_srvcc_info
get_net_auto_modeunverified
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/get_net_auto_mode
Version = 0
Value = 1
Reserved = 0
lte_emerg_redialunverified = 657930x10101
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_emerg_redial
supplement_service_domain_prefunverified = 1
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/supplement_service_domain_pref
wifi_configunverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/wifi_config
LTE band preferencelikely = ffffffffff7fffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref

efs:/nv/item_files/modem/nas (3)

EMM NAS itemslikely =
32-byte EMM configuration blobefs:/nv/item_files/modem/nas/emm_nas_nv_items
Ignore MT CSFB during VoLTE = 1= On
Ignore a mobile-terminated CSFB page while a VoLTE call is activeefs:/nv/item_files/modem/nas/lte_nas_ignore_mt_csfb_during_volte_call
SRVCC support = 1= On
SRVCC capability indication from E-UTRAN to UTRAN (TS 23.216)efs:/nv/item_files/modem/nas/nas_srvcc_support

efs:/nv/item_files/modem/sms (1)

Refresh vote OKlikely = 1= On
Vote TRUE for SIM REFRESHefs:/nv/item_files/modem/sms/mmgsdi_refresh_vote_ok

efs:/nv/item_files/modem/uim/mmgsdi (1)

refresh_vote_okunverified = 1
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/mmgsdi/refresh_vote_ok

efs:/nv/item_files/wcdma/l1 (1)

wl1_nb_rejection_nvunverified = 019001000010050a
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/l1/wl1_nb_rejection_nv

efs:/nv/item_files/wcdma/rrc (1)

wcdma_rrc_dormancy_supportunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_dormancy_support

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

efs:/sd (1)

efs:/sd/rat_acq_order =

nv (21)

RTRE Configurationlikely = 0
nv:855
Acquisition Order Preferencelikely = 0
nv:848
Network Selection Mode Preferencelikely = 0
nv:849
GSM/UMTS SMS Bearer Preferencelikely = 2
nv:909
GSM/UMTS Cell Broadcast SMS Carrier Configurationlikely = 1
nv:1016
GSM/UMTS Cell Broadcast SMS User Preferencelikely = 2
nv:1017
MS SMS Max Number Of SMSlikely = 23
nv:3006
SMS MO Retry Periodlikely = 180
nv:3532
SMS MO Retry Intervallikely = 45
nv:3533
UMTS AMR Codec Preference Configlikely = 15
nv:6850
NAS Release Compliancelikely = 3
nv:4722
Mode preference = 4= Automatic
Digital/Analog Mode Preferencenv:10
Hybrid preference = 1= On
Hybrid CDMA 1x + HDR operationnv:562
CS TO VOIP Fallback Timerlikely = 10
nv:6830
VOIP Cancel Retry Timerlikely = 10
nv:6831
AAGPS Default QoS Timelikely = 64
nv:1918
AAGPS Positioning Modes Supportedlikely = 65407
nv:1920
RRC Integrity Enabledlikely = 1
nv:880
RRC Ciphering Enabledlikely = 1
nv:881
RRC Fake Security Enabledlikely = 0
nv:882
Bannerlikely = "Vodafone_IN"
nv:71