carrier-explode Explode and decode carrier data GitHub About
 firstnetpacific_us

Bell_Canada in the Qualcomm modem firmware of SP1A.210812.016.C2.

Header
MCFG version08014723
LabelBell_Canada
Version23470108
Base version22470108
Capability14000000
Digestöˆ¤×¹»IÆ4££hLmu³$9<ŠSցr£5T
Trailer version0001
Selected by (4)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC302610any SIM
MCC-MNC302651any SIM
MCC-MNC302630any SIM
MCC-MNC302640any SIM
Settings (149)

efs:/cert (1)

efs:/cert/Entrust_Root_Cert.der =

efs:/data (10)

ds_dsd_attach_profile.txtunverified = "Attach_Profile_ID:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_dsd_attach_profile.txt
iwlan_s2b_config.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/iwlan_s2b_config.xml
ds_andsf_config.txtunverified = "andsf_rule_mgr_active:1; lte_meas_alpha:50; lte_sampling_interval:1000; lte_avg_interval:5000; wifi_meas_alpha:65; wifi_sampling_interval:1000; wifi_avg_interval:5000; cdma_1x_meas_alpha:50; cdma_1x_avg_interval:6000; cdma_1x_acq_hyst_interval:3000; cdma_1x_lost_hyst_interval:3000; cdma_1x_sampling_interval:2000;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_andsf_config.txt
Default ANDSFlikely =
ANDSF Wi-Fi/cellular steering policy (TS 24.312)efs:/data/default_andsf.xml
andsf.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/andsf.xml
threshold1.txtunverified = "rssi_high:-65; is_rssi_high_valid:1; rssi_low:-65; is_rssi_low_valid:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/threshold1.txt
threshold2.txtunverified = "rssi_high:-85; is_rssi_high_valid:1; rssi_low:-85; is_rssi_low_valid:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/threshold2.txt
threshold3.txtunverified = "rssi_high:-79; is_rssi_high_valid:1; rssi_low:-79; is_rssi_low_valid:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/threshold3.txt
threshold4.txtunverified = "rssi_high:-75; is_rssi_high_valid:1; rssi_low:-75; is_rssi_low_valid:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/threshold4.txt
ds_eps_kamgr_pdn.txtunverified = No value
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_eps_kamgr_pdn.txt

efs:/Data_Profiles (4)

efs:/Data_Profiles/Profile1 =
efs:/Data_Profiles/Profile2 =
efs:/Data_Profiles/Profile3 =
efs:/Data_Profiles/Profile4 =

efs:/data/3gpp/throttling (1)

srv_req_throt_config.txtunverified = "FAILURE_TIMER_5:20;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/3gpp/throttling/srv_req_throt_config.txt

efs:/efsprofiles (1)

efs:/efsprofiles/overideconfig = " [SIPConfig:GeoLocation] #enable or disable location info inclusion in regular calls iEnableCellInfoInPANI = 0 #enable or disable location info inclusion in regular calls iEnableLocInfoInNormalCall = 0 #enable or disable location info inclusion in emergency calls iEnableLocInfoInEmergencyCall = 1 #to set the threshold for uncertainty validation fUnCertaintyThreshold = 0.0 [QIPCALL:H264_2] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 117 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 118 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_1] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 115 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 116 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_0] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 7 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 113 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 114 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 384 #Preffered bitrate bitrate_preferred = 384 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:EVS_0] #channel aware setting ch_aw_recv = -1 #This config is used for hf only hf_only = 0 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. It has to be in DECIMAL format. BitRate = 120 [QIPCALL:EVS_1] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, *Bandwidth = 5 #This config is used for bit rate. *BitRate = 112 [QIPCALL:EVS_2] #channel aware setting *ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, *Bandwidth = 2 #This config is used for bit rate. *BitRate = 24 [SMSDAN:USSDSettings] #This config item controls the Language String to be used. ussdLangString = "" [QIPCALL:H265_2] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationTimers] #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for SSIM device wlanGaurdTimer = 7 #This config item controls the Register configuration for the network-initiated De reg Timer value. networkInitiatedDeRegistrationTimer = 0 #This config item controls the Retry timer for permanent PDP failures pdnRetryLongTimer = 10 #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for MSIM device wlanGaurdTimerMSIM = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for SSIM device wwanGaurdTimer = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for MSIM device wwanGaurdTimerMSIM = 10 #This config item controls the Retry timer for temporary failures pdnRetryShortTimer = 60 [QIPCALL:H265_0] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [QIPCALL:H265_1] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Ut:UtConfiguration] #This config is required to configure the server responses for which UT is to be blocked permanently BlockUtResponseCodes = "" #This config item controls the media element type for Call Barring Service. 0:No media tag support, 1:One media tag per media type, 2: include both audio and video tags mediaElementSupportForCB = 0 #This config item specifies if the realm is to trimmed or not. 0:Not enabled(default), 1:enabled isTrimRealmEnabled = 0 #This config item specifies if IR92v10 is enabled or not. 0:Not enabled(default), 1:enabled isIr92V10Enabled = 0 #This config item controls the time for which the PDN needs to be kept Active after a SS request is completed *pdnHysTimerValue = 600 #This config item controls the Maximum time within which a Response should be sent to UI maxResponseTimerValue = 0 #This config item controls the action item when there is no SIB value for CB request. 0:Default, 1:Reject, 2:Audio Only, 3:Both Audio and Video emptySIBUsageForCB = 0 #This config item controls the action item. When a rule id is not present in a server xml, a request is not allowed. It is used on VDF-Portugal only now. 0:Not to check a rule ID(Default), 1:Block a request when rule ID is not present in a server xml blockIfRuleIDAbsent = 0 [SIPConfig:FeatureFlags] #enable or disable sip instance inclusion in contact header IsSipInstanceNeeded = 1 #enable or disable Cellular-Network-Info header IsCNIEnabled = 1 #enable or disable header compact form IsCompactFormEnabled = 0 #enable or disable IsUIReadyStatusCheckNeeded IsUIReadyStatusCheckNeeded = 0 #disable StopTimerBon1xx once 1xx response is not received StopTimerBon1xx = 0 #enable or disable IsImsiNeededForContactHeader IsImsiNeededForContactHeader = 0 [QIPCALL:ImsVoiceSrvccConfig] #This config is required to enable bSRVCC. #sync S2, 2018/3/13, Duncan Wu *bSrvccEnabled = 0 #This config is required to enable aSRVCC. aSrvccEnabled = 1 #This config is required to enable mid call SRVCC. *midcallSrvccEnabled = 1 [QIPCALL:ImsRtcpConfig] #This config is required to configure the RR bandwidth for Video. rrForVideo = 2000 #This config is required to configure the timer for RTCP #monitoring. rtcpLinkAlivenessTimer = 20 #This config is required to configure the RS bandwidth for Audio. *rsForAudio = 625 #This config is required to disbale/enable the RTCP monitoring. disableRTCPMonitoring = 0 #This config is required to configure the timer for RTCP #Reporting in VT call. rtcpReportingIntervalInVideo = 1 #This config is required to configure the RS bandwidth for Video. rsForVideo = 600 #This config is required to configure the RR bandwidth for Audio. *rrForAudio = 1875 [QIPCALL:AMR_4] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:G711_2] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMA [QIPCALL:G711_1] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:G711_0] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:AMR_0] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_1] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_2] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:AMR_3] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:ImsVoiceQoSConfig] #This config is required to enable sending SDP answer in PRACK #for 183 if the local qos is granted before 183 response is recvd by #the UE. qosOptimization = 0 #This config is required to configure the timer for dedicated #bearer allocation. qosReservationTimer = 8000 #This config is required to enable set the desired qos strength #for local and remote UEs. qosDesiredStrength = 1 #This config is required to enable 183 for Reneg qosMc183 = 0 #This config is required to configure if the UE must wait for #video dedicated bearer allocation during call setup. localQosResReqVideo = 1 #This config is required to configure if the UE must wait for #text dedicated bearer allocation during call setup. localQosResReqText = 1 #This config is required to enable/disable video CRBT feature VideoCRBT = 0 #This config is required to configure the early QoS timer for video dedicated #bearer allocation. earlyQosReservationTimer = 0 #This config is required to enable Qos precondition negotiation #in SDP. qosPreconditionsEnabled = 1 #This config is required to enable Qos MC precondition negotiation #in SDP. qosMcPreconditionsEnabled = 0 #This config is required to configure the MBR threshold. iMBRthresholdValue = 0 #This config is required to configure if the UE must wait for #audio dedicated bearer allocation during call setup. localQosResReqAudio = 1 #This config is required to configure if the initial SDP #directionality should be inactive in REINVITE when preconditions are #used reinviteSdpDirInactive = 0 #This config is required to enable MBR check for video bearer. qosMbrVideoCheckReqEnabled = 1 #This config is required to configure if the initial SDP #directionality should be inactive when preconditions are used. inviteSdpDirInactive = 0 #This config is required to enable MBR check for audio bearer. qosMbrAudioCheckReqEnabled = 0 #This config is required to enable QCI match with the requested media type for qos checkQciForQoSMediaType = 0 #This config is required to enable mid-call precondition for Call Hold/Resume qosMcHold = 0 [Ut:XCAPCommonHC] #This config item controls the configuration of BSF server address *bsfServerAddress = "bsf.ims.bell.ca:443" #This config item controls whether GBA_U is enabled or not useGBAMEOnly = 0 #This config item controls whether ims prefix is added or not for Ub request like as bsf.ims.mnc005.mcc232.pub.3gppnetwork.org includeIMSPrefixForUSIM = 0 #This config item controls whether BSF server supports TLS *bsfServerTlsSupport = 1 [Registration:RegistrationFeatureFlags] #This config item specifies if the sub operator is APTG and special handling is required for Options unsubscribed error or not. 0:Not enabled(default), 1:enabled optionsUnsubscribedSpecialHandling = 0 #This config item controls whether need to reset AWT timer. notResetAWTTimerEnable = 0 [QIPCALL:EVS_3] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:ImsVoiceSessionTimerConfig] #This config is required to configure the session refresher shall #be UAC/UAS. #b/111553168 change to uac *sessionRefresherType = 0 #This config is required to enable session timer support. sessionTimerEnabled = 1 #This config is required to enable Stand Alone Session Expiry #negotiation. standAloneEnabled = 1 #This config is required to enable Sesssion Expiry timer #negotiation. allowSeNegotiation = 0 #This config is required to configure the method for session #referesh shall be REINVITE/UPDATE. sessionRefresherMethod = QP_CONFIG_SES_REFRESH_UPDATE [QIPCALL:ImsVoiceConfig] #This config is required to configure the Emergency call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network emergencyCallCancelTimer = 500 #This config is required to configure the default WPS invite duration. wpsInviteDuration = 0 #This config is required to enable 380 response validation as per #3GPP. enableAlternateSrvRspCheck = 1 #This config is required to set the display text priority #subscription. displayTextPriority = 3 #This config is required to include MTT USSD feature tag into IMS registration. ussdAcceptContact = "+g.3gpp.nw-init-ussi" #This config is required to configure the default invite retry counter. inviteRetryCounter = 2 #This config is required to select the default emergency URI if sub category matches with multiple entries e911SelectDefURI = 0 #This config is required to disable early media timer. disableEarlyMediaTimer = 0 #This config is required to configure the voice call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network voiceCallCancelTimer = 0 #This config is required to place AMR WB before AMR in encryption call. preferAMRWBinEncryptionCall = 0 #This config is required to enable PEM header in 183. enablePEMHeaderIn183 = 0 #This config is required to configure the default URI type #(SIP/TEL) for MO calls. uriType = QPE_IMS_URI_TEL #This config is required to configure the enabling of sending REINVITE #during Active calls HO. reInviteonHOforActiveCalls = 0 #This config is required to configure the terminating identity presentation or restriction type. terminatingIdentityService = 0 #This config is required to configure the default WPS fallback duration. wpsFallbackDuration = 0 #This config is required to configure the ignoring of AS value ignoreASValidation = 0 #This config is required to configure the max-red value max_red = 0 #This config is required to set error code for CT submode. sessionEndResponseTimeout = 0 #This config is required to enable VoWIFI Call Continuity to LTE NonVOPS. enableVCCtoLTENonVOPS = 0 #This config is required to enable emergency call operation in CS-only mode. emergCallCSOnly = 0 #This config is required to configure number format during roaming, geo-local/home-local phoneContextPolicy = QPE_IMS_PHONE_CONTEXT_GEO_LOCAL #This config is required to enable Call end on RTP inactivity. CallEndonRTPInactivity = 0 #This config is required to set the phone context domain source. PhoneContextSource = QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_MCC_MNC #This config is required to set preconditions enabled with qos events ignored. ignoreQOSEvents = 0 #This config is required to enable the MT USSI. enableMTUSSI = 1 #This config is required to configure the privacy type. Set 0: for none, 1: for id, 2: for header. #sync S2, 2018/3/13, Duncan Wu *privacyType = 1 [Registration:RegistrationDefaultParams] #This config item will be used to configure default UserName to register with Network userName = "" #This config item will be used to configure default authType to register with Network authType = "" #This config item will be used to configure default Display Name to register with Network displayName = "" #This config item will be used to configure default DomainName to register with Network domainName = "" #This config item will be used to configure default authSecertKey authSecertKey = "465b5ce8b199b49faa5f0a2ee238a6bc" #This config item will be used to configure default Private URI to register with Network privateURI = "" #This config item will be used to configure default is3GPP is3GPP = 0 #This config item will be used to configure default Realm to register with Network realm = "" #This config item will be used to configure default public URI to register with Network publicURI = "" #This config item will be used to configure default Password to register with Network password = "" [QIPCALL:ImsVoiceSuppsConfig] #This config is required to configure the timer for Notify #response to Refer. notifyReferRspTimer = 20 #This config is required to end the conference call automatically #when all other participants left the call. endConfCallUponNoParticipant = 1 #This config is required to enable presentation of the call to #the user when UE is already in two calls (active and held). *presentThirdCalltoUser = 1 #This config is required to configure the conference event #package subscription timer. confEvtSubTimer = 3600 #This config is required not to send unsubscribe to NW for conference call when there is #no notify-terminated received. isUnsubcribeDisabled = 0 #This config is required to configure the dialog for the #conference event subscribe request. *confEvtSubOutOfDialog = 1 #This config is required to configure the three party conf URI #for KDDI. threePartyConfFactoryUri = "" #This config is required to enable the conference event package #subscription. *confEvtPakageEnabled = 2 [QIPCALL:ImsRtcpXRConfig] #This config is required to enable RTCP-XR support. rtcpXrEnabled = 0 [SMSDAN:DANSettings] #This config item controls QIPCall 1x SMS and Voice Enabled (0:DAN SMS can be sent only if there is no voice call. #1:Enabled; DAN and MO SMS can be sent even when a voice call is up). smsAndVoiceOver1x = 0 #This NV item is used for configuring the transport channel preference on which DAN is to be sent. channelPreference = 0 #This config item controls the DAN Retry Timer Interval Duration (In ms) retryTimer = 0 #This config item controls the DAN Max Retry Counter maxRetryCount = 0 #This NV item is used for controlling DAN Hysterisis Timer Duration hysterisisTimer = 0 [QIPCALL:H263_0] #payload type number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationCounters] #This config item controls the Immediate Retry timer for failures maxPDNIntermediateRetries = 1 [QIPCALL:ImsVideoConfig] #This config is required to configure the LTR mode. ltrMode = QP_CONFIG_IMS_LTR_DISABLED #This config is required to configure if VT capability can be impacted by modile data. vtImpactedByMobileData = 1 #This config is required to set the video_capability_for_invite_no_sdp for #incoming INVITE without SDP. video_capability_for_invite_no_sdp = 1 #Internal:This config is required to store peer supported #services trackPeerServices = 0 [SIPConfig:Transport] #above this size choose TCP and value 0 means disable tcp port open on UE TCPThresholdValue = 1230 #enable or disable TCP Static threshold TCPEnableStaticThreshold = 0 [SIPConfig:StandardTimers] #sip registration expires value *SipRegValue = 600000 #sip reg subscription expires value *SipSubscribeValue = 86400 [SIPConfig:IPSec] #integrity scheme for ipsec sip messages IntScheme = 3 #encryption algo for ipsec sip messages EncAlgo = 7 [SMSDAN:SMSSettings] #This config item used to configure the error code and used while reject Incoming MT sms while NAS is busy in service one SMS. IncomingSmsRejectCode = 400 #This config item used to enable or disable feature of rejecting incoming SMS when IMS is already processing a SMS. EnableIncomingSmsRejectFeature = 0 #This config item controls the SMS Feature tag smsAcceptContact = "+g.3gpp.smsip" [MEDIA:MediaCommon] #This config item specifies if overall rate adaptation feature is enabled or not. audioRAEnable = 1 #This config item specifies maximum mtu size for the rtp packet mtuSize = 1400 [Registration:RegistrationSettings] #This config item controls Registration over IWLAN in airplane mode enableRegistrationInLPM = 2 #This config item controls PCSCF IP fallback feature pcscfBasedIPFallback = 0 #This config item controls TTY over IMS enableTTYOverIMS = 0 #This config item controls Reregistration over WIFI during Activate 3G call BlockRegOverWifiWhileActiveCSCall = 1 #This config item controls Reregistration over WIFI during Activate 1x call BlockRegOverWifiWhileActive1XCall = 0 [Ut:XcapHCConfigUserProfile] #This config item controls the configured user name configUserName = "" #This config item controls the configured user name configUserPassword = "" [DPL:Common] #This config item determines usage to read the SIM card parameters (ISIM, USIM ) etc #Possible INTEGER values for override are as follows: #QPE_CONFIG_IMS_FILE_READ = 0 --> File Read Param Source #QPE_CONFIG_IMS_NV_READ = 1 --> NV Read Param Source #QPE_CONFIG_IMS_CARD_READ = 2 --> Card Read Param Source to read from ISIM #QPE_CONFIG_IMS_FILE_READ_AUTH_ENABLED = 3 --> File Read Param Auth enabled (ONLY for testing) #QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED = 4 --> USIM fallback enabled ParamSrc = QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED [QIPCALL:ImsMediaProfileConfig] #This config is required to video codec profile list on 4G. VideoProfile1 = "H264_0" #This config is required to audio codec profile list. *AudioProfile1 = "EVS_1_126;AMR_1_102;AMR_4_103;AMR_0_104;AMR_2_105" [QIPCALL:ImsVoWifiConfig] #This config is required to configure the wifi connectivity #backoff timer. wifiConnectivityBackoffTimer = 10 [MEDIA:MediaDscp] #This config item specifies dscp value for audio audio = 46 #This config item specifies dscp value for video video = 46 [QIPCALL:ImsVideoModifyConfig] #This config is required to configure the timer in msecs for #waiting on user response to the incoming upgrade req. localUpgradeAcceptTimer = 20000 #This config is required to configure the timer in secs for #response from the peer to the sent upgrade req. remoteUpgradeRejectTimer = 40 [SIPConfig:CustomTimers] #reliable response retry timer cap TRelResponseRetry = 0 [SIPConfig:EmergencyCallTimers] #Emergency T1 timer *T1 = 2000 "

efs:/google (5)

efs:/google/paris_version = "g670_default_32_201910022029 "
efs:/google/cust_ims_ua_enable = 1
efs:/google/user_agent_template = "Google [MI__ap] [SW__ap]"
efs:/google/cust_modem_features = 991
efs:/google/fd_timers.conf = 11259084970393620x4000200040002

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -121; LTEDLRSRPThresholdTargetHigh = -118; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 3; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -15; WCDMA_TRAT_ECIO_Threshold = -10; WCDMA_SRAT_RSCP_Threshold = -115; WCDMA_TRAT_RSCP_Threshold = -110; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -125; LTE_RSRP_Single_in = -118; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -170; LTE_SNR_Single_out = 75; LTE_SNR_Single_in = 85; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/data/3gpp (1)

RPM paramslikely =
Radio Policy Manager retry limits (10 bytes)efs:/nv/item_files/data/3gpp/rpm_params

efs:/nv/item_files/data/3gpp/lteps (1)

carrier_aggregation_display_thresholdunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/3gpp/lteps/carrier_aggregation_display_threshold

efs:/nv/item_files/data/dsd (1)

ds_apn_switchingunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/dsd/ds_apn_switching

efs:/nv/item_files/data/wlan_config (1)

wlan_offload_configunverified = 2
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wlan_offload_config

efs:/nv/item_files/datamodem/protocols (1)

efs:/nv/item_files/datamodem/protocols/ip6_default_mtu = 1500

efs:/nv/item_files/gps/cgps/sm (5)

gnss_lpp_enableunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lpp_enable
gnss_lppe_cp_configunverified = 19
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lppe_cp_config
gnss_1x_up_supl_enableunverified = 0
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_1x_up_supl_enable
gnss_agps_rat_pref_configunverified = 167769610xffff01
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_agps_rat_pref_config
gnss_assisted_glo_protocol_selectunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_assisted_glo_protocol_select

efs:/nv/item_files/ims (24)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 1= Enabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 2
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item

efs:/nv/item_files/modem (1)

LTE connection controlunverified = 1
efs:/nv/item_files/modem/lte_connection_control

efs:/nv/item_files/modem/data (1)

dynamic_port_cfgunverified = 2
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/dynamic_port_cfg

efs:/nv/item_files/modem/data/3gpp (3)

umts_nw_initiated_qos_supportunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/umts_nw_initiated_qos_support
Call before PS attachlikely = 0= Off
Allow data-call origination before PS attachefs:/nv/item_files/modem/data/3gpp/call_orig_allowed_before_ps_attach
L_to_W_qos_continuityunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/L_to_W_qos_continuity

efs:/nv/item_files/modem/data/3gpp/dsmgr (1)

emergency_apn_typeunverified = 1310730x20001
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/dsmgr/emergency_apn_type

efs:/nv/item_files/modem/data/3gpp/ps (3)

modem_def_prof_supportunverified = No value
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/modem_def_prof_support
Service request throttle behaviourlikely = 1
Service-request throttling behaviourefs:/nv/item_files/modem/data/3gpp/ps/ser_req_throttle_behavior
ds_3gpp_redial_for_no_causeunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/ds_3gpp_redial_for_no_cause

efs:/nv/item_files/modem/data/dsmgr (1)

wlan_3g_ip_continuity_enabledunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/dsmgr/wlan_3g_ip_continuity_enabled

efs:/nv/item_files/modem/data/epc (1)

PDN throttling configlikely = "FAILURE_TIMER_5:20; "
Carrier PDN throttling timersefs:/nv/item_files/modem/data/epc/pdn_throttling_config.txt

efs:/nv/item_files/modem/lte/rrc (1)

embms_on_scc_cfg_maskunverified = 0
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/embms_on_scc_cfg_mask

efs:/nv/item_files/modem/lte/rrc/cap (6)

diff_fdd_tdd_fgi_enableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/diff_fdd_tdd_fgi_enable
fgiunverified = 21443375980x7fcffebe
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi
fgi_rel9unverified = 32212254720xc0000000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi_rel9
fgi_r10unverified = 10761011200x40240000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi_r10
mdt_r10_feature_disableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/mdt_r10_feature_disable
lte_feature_disableunverified =
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/lte_feature_disable

efs:/nv/item_files/modem/lte/rrc/cep (2)

conn_control_param_cfgunverified = 39337010x3c0605
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cep/conn_control_param_cfg
conn_control_barring_optmz_enableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cep/conn_control_barring_optmz_enable

efs:/nv/item_files/modem/mmode (15)

LTE disable durationlikely = 12
How long LTE stays disabled when CS services are unavailableefs:/nv/item_files/modem/mmode/lte_disable_duration
SMS domain preference = 1= PS (IMS) SMS preferred
SMS over IMS preferenceefs:/nv/item_files/modem/mmode/sms_domain_pref
SMS mandatorylikely = 0= Off
SMS is mandatory for the device (block LTE if IMS/SGs SMS registration fails)efs:/nv/item_files/modem/mmode/sms_mandatory
Voice domain preference = 3= IMS PS voice preferred
E-UTRAN voice domain (TS 24.301 9.9.3.44)efs:/nv/item_files/modem/mmode/voice_domain_pref
ue_based_cwunverified = 257
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/ue_based_cw
custom_emerg_infounverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/custom_emerg_info
mid_call_srvcc_infounverified = 10995129077770x10000138801
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/mid_call_srvcc_info
get_net_auto_modeunverified
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/get_net_auto_mode
Version = 0
Value = 1
Reserved = 0
lte_emerg_redialunverified = 657930x10101
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_emerg_redial
supplement_service_domain_prefunverified = 3
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/supplement_service_domain_pref
wifi_configunverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/wifi_config
LTE band preferencelikely = ffffffffff7dffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref
SMS onlylikely = 0= Off
Register for SMS onlyefs:/nv/item_files/modem/mmode/sms_only
UE usage settinglikely = 0= Voice centric
TS 24.301 UE usage settingefs:/nv/item_files/modem/mmode/ue_usage_setting
lte_bandpref_extn_65_256unverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_bandpref_extn_65_256

efs:/nv/item_files/modem/nas (4)

Ignore MT CSFB during VoLTE = 1= On
Ignore a mobile-terminated CSFB page while a VoLTE call is activeefs:/nv/item_files/modem/nas/lte_nas_ignore_mt_csfb_during_volte_call
EMM NAS itemslikely =
32-byte EMM configuration blobefs:/nv/item_files/modem/nas/emm_nas_nv_items
lte_nas_ue_sec_capabilityunverified =
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/lte_nas_ue_sec_capability
ISRlikely = 0= Off
Idle-mode Signalling Reduction (TS 23.401)efs:/nv/item_files/modem/nas/isr

efs:/nv/item_files/modem/sms (1)

Refresh vote OKlikely = 1= On
Vote TRUE for SIM REFRESHefs:/nv/item_files/modem/sms/mmgsdi_refresh_vote_ok

efs:/nv/item_files/wcdma (1)

rrc_ganss_support_nvunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc_ganss_support_nv

efs:/nv/item_files/wcdma/rrc (7)

wcdma_rrc_disable_cpc_fdpchunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_disable_cpc_fdpch
WCDMA RRC featurelikely = 0
WCDMA RRC feature maskefs:/nv/item_files/wcdma/rrc/wcdma_rrc_feature
wcdma_rrc_csfb_skip_sib11_optunverified = 0
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_csfb_skip_sib11_opt
Fast return to LTE after CSFBlikely = 1= On
Return from WCDMA to LTE right after a CSFB callefs:/nv/item_files/wcdma/rrc/wcdma_rrc_fast_return_to_lte_after_csfb
wcdma_rrc_wtol_cm_supportunverified = 0
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_wtol_cm_support
wcdma_ppac_supportunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_ppac_support
wcdma_rrc_dormancy_supportunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_dormancy_support

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

efs:/sd (1)

efs:/sd/rat_acq_order =

efs:/SUPL (1)

efs:/SUPL/Entrust_Root_Cert.der =

nv (41)

Bannerlikely = "BELL_CA"
nv:71
RTRE Configurationlikely = 0
nv:855
Acquisition Order Preferencelikely = 0
nv:848
Network Selection Mode Preferencelikely = 0
nv:849
GSM/UMTS SMS Bearer Preferencelikely = 2
nv:909
GSM/UMTS Cell Broadcast SMS Carrier Configurationlikely = 1
nv:1016
GSM/UMTS Cell Broadcast SMS User Preferencelikely = 2
nv:1017
MS SMS Max Number Of SMSlikely = 23
nv:3006
SMS MO Retry Periodlikely = 180
nv:3532
SMS MO Retry Intervallikely = 45
nv:3533
UMTS AMR Codec Preference Configlikely = 13
nv:6850
NAS Release Compliancelikely = 3
nv:4722
Mode preference = 4= Automatic
Digital/Analog Mode Preferencenv:10
Hybrid preference = 1= On
Hybrid CDMA 1x + HDR operationnv:562
CS TO VOIP Fallback Timerlikely = 10
nv:6830
VOIP Cancel Retry Timerlikely = 10
nv:6831
AAGPS Default QoS Timelikely = 64
nv:1918
AAGPS Positioning Modes Supportedlikely = 65407
nv:1920
RRC Integrity Enabledlikely = 1
nv:880
RRC Ciphering Enabledlikely = 1
nv:881
RRC Fake Security Enabledlikely = 0
nv:882
GSM A5 Algorithms Supportedlikely = 5
nv:553
UIM First Instruction Classlikely = 1
nv:896
GPRS Multi Slot Classlikely = 10
nv:911
GSM AMR Call Configurationlikely = 1
nv:1302
EDGE Feature Supportlikely = 1
nv:2508
GERAN Feature Pack 1likely = 1
nv:2512
EDA Feature Supportlikely = 0
nv:3630
EDTM Feature Supportlikely = 0
nv:4209
AAGPS Use Transport Securitylikely = 1= On
Enable user-plane (SUPL) secure transportnv:3758
GNSS SUPL Versionlikely = 131072= 2.0.00x20000
nv:6792
IPv6 enabled = 1= On
Ipv6 Enablednv:1896
EDGE Multislot Classlikely = 10
nv:2509
DTM Feature Supportlikely = 0
nv:3628
DTM Multislot Classlikely = 3
nv:3629
Disable CM Call Typelikely = 0
nv:5280
ENHANCED HPLMN SRCH TBLlikely =
nv:6844
WCDMA RX Diversity Controllikely = 3
nv:3851
HSDPA Categorylikely = 24
3GPP HSDPA UE categorynv:4118
CPU Based Flow Controllikely = 1
nv:4261
WCDMA HSUPA CM Controllerlikely = 1
nv:5090

Chatr in the Qualcomm modem firmware of SP1A.210812.016.C2.

Header
MCFG version08015302
LabelChatr
Version02530108
Base version02530108
Capability04000000
Digestt"ßyZrnpà ¢Ö*õŠ\;¶ƒÝܱTŽd %{êå
Trailer version0001
Selected by (2)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC302320any SIM
MCC-MNC302996any SIM
Settings (103)

efs:/data (1)

ds_dsd_attach_profile.txtunverified = "Attach_Profile_ID:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_dsd_attach_profile.txt

efs:/Data_Profiles (1)

efs:/Data_Profiles/Profile1 =

efs:/efsprofiles (1)

efs:/efsprofiles/overideconfig = " [SIPConfig:GeoLocation] #enable or disable location info inclusion in regular calls iEnableCellInfoInPANI = 0 #enable or disable location info inclusion in regular calls iEnableLocInfoInNormalCall = 0 #enable or disable location info inclusion in emergency calls iEnableLocInfoInEmergencyCall = 1 [QIPCALL:H264_2] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 117 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 118 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_1] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 115 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 116 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_0] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 7 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 113 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 114 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 384 #Preffered bitrate bitrate_preferred = 384 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:EVS_0] #channel aware setting ch_aw_recv = 2 #This config is used for hf only hf_only = 0 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. It has to be in DECIMAL format. BitRate = 120 [QIPCALL:EVS_1] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. BitRate = 120 [QIPCALL:EVS_2] #channel aware setting ch_aw_recv = -1 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:EVS_3] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:H265_2] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationTimers] #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for SSIM device wlanGaurdTimer = 7 #This config item controls the Register configuration for the network-initiated De reg Timer value. networkInitiatedDeRegistrationTimer = 0 #This config item controls the Retry timer for permanent PDP failures pdnRetryLongTimer = 5 #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for MSIM device wlanGaurdTimerMSIM = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for SSIM device wwanGaurdTimer = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for MSIM device wwanGaurdTimerMSIM = 10 #This config item controls the Retry timer for temporary failures pdnRetryShortTimer = 60 [QIPCALL:H265_0] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [QIPCALL:H265_1] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Ut:UtConfiguration] #This config item controls the media element type for Call Barring Service. 0:No media tag support, 1:One media tag per media type, 2: include both audio and video tags mediaElementSupportForCB = 0 #This config item specifies if the realm is to trimmed or not. 0:Not enabled(default), 1:enabled isTrimRealmEnabled = 0 #This config item specifies if IR92v10 is enabled or not. 0:Not enabled(default), 1:enabled isIr92V10Enabled = 1 #This config item controls the time for which the PDN needs to be kept Active after a SS request is completed pdnHysTimerValue = 0 #This config item controls the Maximum time within which a Response should be sent to UI maxResponseTimerValue = 0 #This config item controls the action item when there is no SIB value for CB request. 0:Default, 1:Reject, 2:Audio Only, 3:Both Audio and Video emptySIBUsageForCB = 0 #This config item controls the action item. When a rule id is not present in a server xml, a request is not allowed. It is used on VDF-Portugal only now. 0:Not to check a rule ID(Default), 1:Block a request when rule ID is not present in a server xml blockIfRuleIDAbsent = 0 [SIPConfig:FeatureFlags] #enable or disable sip instance inclusion in contact header IsSipInstanceNeeded = 0 #enable or disable Cellular-Network-Info header IsCNIEnabled = 1 #enable or disable header compact form IsCompactFormEnabled = 0 #enable or disable IsUIReadyStatusCheckNeeded IsUIReadyStatusCheckNeeded = 0 #disable StopTimerBon1xx once 1xx response is not received StopTimerBon1xx = 0 #enable or disable IsImsiNeededForContactHeader IsImsiNeededForContactHeader = 0 [QIPCALL:ImsVoiceSrvccConfig] #This config is required to enable bSRVCC. bSrvccEnabled = 1 #This config is required to enable aSRVCC. aSrvccEnabled = 1 #This config is required to enable mid call SRVCC. midcallSrvccEnabled = 1 [QIPCALL:ImsRtcpConfig] #This config is required to configure the RR bandwidth for Video. rrForVideo = 2000 #This config is required to configure the timer for RTCP #monitoring. rtcpLinkAlivenessTimer = 20 #This config is required to configure the RS bandwidth for Audio. rsForAudio = 600 #This config is required to disbale/enable the RTCP monitoring. disableRTCPMonitoring = 0 #This config is required to configure the timer for RTCP #Reporting in VT call. rtcpReportingIntervalInVideo = 1 #This config is required to configure the RS bandwidth for Video. rsForVideo = 600 #This config is required to configure the RR bandwidth for Audio. rrForAudio = 2000 [QIPCALL:AMR_4] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:G711_2] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMA [QIPCALL:G711_1] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:G711_0] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:AMR_0] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_1] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_2] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:AMR_3] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:ImsVoiceQoSConfig] #This config is required to enable sending SDP answer in PRACK #for 183 if the local qos is granted before 183 response is recvd by #the UE. qosOptimization = 0 #This config is required to configure the timer for dedicated #bearer allocation. qosReservationTimer = 10000 #This config is required to enable set the desired qos strength #for local and remote UEs. #sync from s2 for con call UL no sound issue *qosDesiredStrength = 0 #This config is required to enable 183 for Reneg qosMc183 = 0 #This config is required to configure if the UE must wait for #video dedicated bearer allocation during call setup. localQosResReqVideo = 1 #This config is required to configure if the UE must wait for #text dedicated bearer allocation during call setup. localQosResReqText = 1 #This config is required to configure the early QoS timer for video dedicated #bearer allocation. earlyQosReservationTimer = 0 #This config is required to enable Qos precondition negotiation #in SDP. qosPreconditionsEnabled = 1 #This config is required to enable Qos MC precondition negotiation #in SDP. qosMcPreconditionsEnabled = 0 #This config is required to configure the MBR threshold. iMBRthresholdValue = 0 #This config is required to configure if the UE must wait for #audio dedicated bearer allocation during call setup. #sync from s2 for con call UL no sound issue *localQosResReqAudio = 0 #This config is required to configure if the initial SDP #directionality should be inactive in REINVITE when preconditions are #used reinviteSdpDirInactive = 0 #This config is required to enable MBR check for video bearer. qosMbrVideoCheckReqEnabled = 1 #This config is required to configure if the initial SDP #directionality should be inactive when preconditions are used. inviteSdpDirInactive = 0 #This config is required to enable MBR check for audio bearer. qosMbrAudioCheckReqEnabled = 0 #This config is required to enable mid-call precondition for Call Hold/Resume qosMcHold = 0 [Ut:XCAPCommonHC] #This config item controls the configuration of BSF server address *bsfServerAddress = "" #This config item controls whether GBA_U is enabled or not useGBAMEOnly = 0 #This config item controls whether ims prefix is added or not for Ub request like as bsf.ims.mnc005.mcc232.pub.3gppnetwork.org includeIMSPrefixForUSIM = 0 #This config item controls whether BSF server supports TLS bsfServerTlsSupport = 0 [Registration:RegistrationFeatureFlags] #This config item specifies if the sub operator is APTG and special handling is required for Options unsubscribed error or not. 0:Not enabled(default), 1:enabled optionsUnsubscribedSpecialHandling = 0 [QIPCALL:ImsVoiceSessionTimerConfig] #This config is required to configure the session refresher shall #be UAC/UAS. sessionRefresherType = QP_CONFIG_SES_REFRESHER_UAC #This config is required to enable session timer support. sessionTimerEnabled = 1 #This config is required to enable Stand Alone Session Expiry #negotiation. standAloneEnabled = 1 #This config is required to enable Sesssion Expiry timer #negotiation. allowSeNegotiation = 0 #This config is required to configure the method for session #referesh shall be REINVITE/UPDATE. sessionRefresherMethod = QP_CONFIG_SES_REFRESH_UPDATE [QIPCALL:ImsVoiceConfig] #This config is required to configure the Emergency call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network emergencyCallCancelTimer = 30000 #This config is required to configure the default WPS invite duration. wpsInviteDuration = 0 #This config is required to enable 380 response validation as per #3GPP. enableAlternateSrvRspCheck = 1 #This config is required to set the display text priority #subscription. displayTextPriority = 2 #This config is required to include MTT USSD feature tag into IMS registration. ussdAcceptContact = "+g.3gpp.nw-init-ussi" #This config is required to configure the default invite retry counter. inviteRetryCounter = 2 #This config is required to select the default emergency URI if sub category matches with multiple entries e911SelectDefURI = 0 #This config is required to disable early media timer. disableEarlyMediaTimer = 0 #This config is required to configure the voice call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network voiceCallCancelTimer = 30000 #This config is required to enable PEM header in 183. enablePEMHeaderIn183 = 0 #This config is required to configure the default URI type #(SIP/TEL) for MO calls. uriType = QPE_IMS_URI_SIP #This config is required to configure the terminating identity presentation or restriction type. terminatingIdentityService = 0 #This config is required to configure the default WPS fallback duration. wpsFallbackDuration = 0 #This config is required to configure the ignoring of AS value ignoreASValidation = 0 #This config is required to set error code for CT submode. sessionEndResponseTimeout = 0 #This config is required to enable VoWIFI Call Continuity to LTE NonVOPS. enableVCCtoLTENonVOPS = 0 #This config is required to enable emergency call operation in CS-only mode. *emergCallCSOnly = 1 #This config is required to configure number format during roaming, geo-local/home-local phoneContextPolicy = QPE_IMS_PHONE_CONTEXT_GEO_LOCAL #This config is required to set the phone context domain source. PhoneContextSource = QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_PAU_HEADER #This config is required to set preconditions enabled with qos events ignored. ignoreQOSEvents = 0 #This config is required to enable the MT USSI. enableMTUSSI = 1 #This config is required to configure the privacy type. Set 0: for none, 1: for id, 2: for header. privacyType = 2 [Registration:RegistrationDefaultParams] #This config item will be used to configure default UserName to register with Network userName = "" #This config item will be used to configure default authType to register with Network authType = "" #This config item will be used to configure default Display Name to register with Network displayName = "" #This config item will be used to configure default DomainName to register with Network domainName = "" #This config item will be used to configure default authSecertKey authSecertKey = "465b5ce8b199b49faa5f0a2ee238a6bc" #This config item will be used to configure default Private URI to register with Network privateURI = "" #This config item will be used to configure default is3GPP is3GPP = 0 #This config item will be used to configure default Realm to register with Network realm = "" #This config item will be used to configure default public URI to register with Network publicURI = "" #This config item will be used to configure default Password to register with Network password = "" [QIPCALL:ImsVoiceSuppsConfig] #This config is required to configure the timer for Notify #response to Refer. notifyReferRspTimer = 20 #This config is required to end the conference call automatically #when all other participants left the call. endConfCallUponNoParticipant = 1 #This config is required to enable presentation of the call to #the user when UE is already in two calls (active and held). presentThirdCalltoUser = 0 #This config is required to configure the conference event #package subscription timer. confEvtSubTimer = 3600 #This config is required to configure the dialog for the #conference event subscribe request. #sync from S2, which fix con call UL no sound issue *confEvtSubOutOfDialog = 0 #This config is required to configure the three party conf URI #for KDDI. threePartyConfFactoryUri = "" #This config is required to enable the conference event package #subscription. confEvtPakageEnabled = QPE_IMS_CONF_PCKG_ALL [QIPCALL:ImsRtcpXRConfig] #This config is required to enable RTCP-XR support. rtcpXrEnabled = 0 [SMSDAN:DANSettings] #This config item controls QIPCall 1x SMS and Voice Enabled (0:DAN SMS can be sent only if there is no voice call. #1:Enabled; DAN and MO SMS can be sent even when a voice call is up). smsAndVoiceOver1x = 1 #This NV item is used for configuring the transport channel preference on which DAN is to be sent. channelPreference = 0 #This config item controls the DAN Retry Timer Interval Duration (In ms) retryTimer = 0 #This config item controls the DAN Max Retry Counter maxRetryCount = 3 #This NV item is used for controlling DAN Hysterisis Timer Duration hysterisisTimer = 45000 [QIPCALL:H263_0] #payload type number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationCounters] #This config item controls the Immediate Retry timer for failures maxPDNIntermediateRetries = 1 #This config item controls the number of retries on Authentication failure. Currently used for Rogers #Modify per case#03006712, b/63177238 *maxPDNRetriesOnIwlanAuthFailure = 2 [QIPCALL:ImsVideoConfig] #This config is required to configure the LTR mode. ltrMode = QP_CONFIG_IMS_LTR_ENABLED_RESTRICT_QC #This config is required to set the video_capability_for_invite_no_sdp for #incoming INVITE without SDP. video_capability_for_invite_no_sdp = 1 #Internal:This config is required to store peer supported #services trackPeerServices = 0 [SIPConfig:Transport] #above this size choose TCP and value 0 means disable tcp port open on UE TCPThresholdValue = 1500 #enable or disable TCP Static threshold TCPEnableStaticThreshold = 0 [SIPConfig:StandardTimers] #sip registration expires value SipRegValue = 0 #sip reg subscription expires value SipSubscribeValue = 0 [SIPConfig:IPSec] #integrity scheme for ipsec sip messages IntScheme = 3 #encryption algo for ipsec sip messages EncAlgo = 7 [SMSDAN:SMSSettings] #This config item controls the SMS Feature tag smsAcceptContact = "+g.3gpp.smsip" [MEDIA:MediaCommon] #This config item specifies if overall rate adaptation feature is enabled or not. audioRAEnable = 1 #This config item specifies maximum mtu size for the rtp packet mtuSize = 1400 [Registration:RegistrationSettings] #This config item controls Registration over IWLAN in airplane mode enableRegistrationInLPM = 2 #This config item controls PCSCF IP fallback feature pcscfBasedIPFallback = 0 #This config item controls TTY over IMS enableTTYOverIMS = 0 #This config item controls Reregistration over WIFI during Activate 3G call BlockRegOverWifiWhileActiveCSCall = 1 #This config item controls Reregistration over WIFI during Activate 1x call BlockRegOverWifiWhileActive1XCall = 0 [Ut:XcapHCConfigUserProfile] #This config item controls the configured user name configUserName = "" #This config item controls the configured user name configUserPassword = "" [DPL:Common] #This config item determines usage to read the SIM card parameters (ISIM, USIM ) etc #Possible INTEGER values for override are as follows: #QPE_CONFIG_IMS_FILE_READ = 0 --> File Read Param Source #QPE_CONFIG_IMS_NV_READ = 1 --> NV Read Param Source #QPE_CONFIG_IMS_CARD_READ = 2 --> Card Read Param Source to read from ISIM #QPE_CONFIG_IMS_FILE_READ_AUTH_ENABLED = 3 --> File Read Param Auth enabled (ONLY for testing) #QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED = 4 --> USIM fallback enabled ParamSrc = QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED [QIPCALL:ImsMediaProfileConfig] #This config is required to video codec profile list on 4G. VideoProfile1 = "H264_0" #This config is required to audio codec profile list. AudioProfile1 = "EVS_0_126;EVS_1_127;AMR_1_104;AMR_0_102" [QIPCALL:ImsVoWifiConfig] #This config is required to configure the wifi connectivity #backoff timer. wifiConnectivityBackoffTimer = 10 [MEDIA:MediaDscp] #This config item specifies dscp value for audio audio = 46 #This config item specifies dscp value for video video = 46 [QIPCALL:ImsVideoModifyConfig] #This config is required to configure the timer in msecs for #waiting on user response to the incoming upgrade req. localUpgradeAcceptTimer = 20000 #This config is required to configure the timer in secs for #response from the peer to the sent upgrade req. remoteUpgradeRejectTimer = 40 [SIPConfig:CustomTimers] #reliable response retry timer cap TRelResponseRetry = 0 "

efs:/google (3)

efs:/google/paris_version = "g670_default_32_201910022029 "
efs:/google/cust_modem_features = 991
efs:/google/fd_timers.conf = 128849018910x300000003

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -118; LTEDLRSRPThresholdTargetHigh = -115; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 3; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -15; WCDMA_TRAT_ECIO_Threshold = -10; WCDMA_SRAT_RSCP_Threshold = -115; WCDMA_TRAT_RSCP_Threshold = -110; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -125; LTE_RSRP_Single_in = -118; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -170; LTE_SNR_Single_out = 75; LTE_SNR_Single_in = 85; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/data/3gpp/lteps (1)

carrier_aggregation_display_thresholdunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/3gpp/lteps/carrier_aggregation_display_threshold

efs:/nv/item_files/data/wlan_config (1)

wlan_offload_configunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wlan_offload_config

efs:/nv/item_files/gps/cgps/sm (2)

gnss_lpp_enableunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lpp_enable
gnss_lppe_cp_configunverified = 19
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lppe_cp_config

efs:/nv/item_files/ims (24)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 0= Disabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 2
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item

efs:/nv/item_files/modem/data/dsmgr (1)

wlan_3g_ip_continuity_enabledunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/dsmgr/wlan_3g_ip_continuity_enabled

efs:/nv/item_files/modem/geran/grr (3)

g2l_blind_redir_controlunverified = 0
GERAN setting: GSM/GPRS radio resourceefs:/nv/item_files/modem/geran/grr/g2l_blind_redir_control
G2L blind redirect after CSFBlikely = 0
GSM->LTE blind redirection after a CSFB callefs:/nv/item_files/modem/geran/grr/g2l_blind_redir_after_csfb_control
g2l_blind_redir_after_srvcc_controlunverified = 0
GERAN setting: GSM/GPRS radio resourceefs:/nv/item_files/modem/geran/grr/g2l_blind_redir_after_srvcc_control

efs:/nv/item_files/modem/lte/rrc (1)

embms_on_scc_cfg_maskunverified = 0
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/embms_on_scc_cfg_mask

efs:/nv/item_files/modem/lte/rrc/cap (6)

diff_fdd_tdd_fgi_enableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/diff_fdd_tdd_fgi_enable
fgiunverified = 15613287740x5d0ffc86
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi
fgi_rel9unverified = 32212254720xc0000000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi_rel9
fgi_r10unverified = 10761011200x40240000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi_r10
mdt_r10_feature_disableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/mdt_r10_feature_disable
lte_feature_disableunverified =
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/lte_feature_disable

efs:/nv/item_files/modem/mmode (14)

LTE disable durationlikely = 12
How long LTE stays disabled when CS services are unavailableefs:/nv/item_files/modem/mmode/lte_disable_duration
SMS domain preference = 0= PS SMS not allowed
SMS over IMS preferenceefs:/nv/item_files/modem/mmode/sms_domain_pref
SMS mandatorylikely = 1= On
SMS is mandatory for the device (block LTE if IMS/SGs SMS registration fails)efs:/nv/item_files/modem/mmode/sms_mandatory
Voice domain preference = 0= CS voice only
E-UTRAN voice domain (TS 24.301 9.9.3.44)efs:/nv/item_files/modem/mmode/voice_domain_pref
ue_based_cwunverified = 257
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/ue_based_cw
custom_emerg_infounverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/custom_emerg_info
mid_call_srvcc_infounverified = 10995129077770x10000138801
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/mid_call_srvcc_info
get_net_auto_modeunverified
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/get_net_auto_mode
Version = 0
Value = 1
Reserved = 0
lte_emerg_redialunverified = 1
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_emerg_redial
supplement_service_domain_prefunverified = 1
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/supplement_service_domain_pref
wifi_configunverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/wifi_config
LTE band preferencelikely = ffffffffff7dffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref
UE usage settinglikely = 0= Voice centric
TS 24.301 UE usage settingefs:/nv/item_files/modem/mmode/ue_usage_setting
lte_bandpref_extn_65_256unverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_bandpref_extn_65_256

efs:/nv/item_files/modem/nas (3)

Ignore MT CSFB during VoLTE = 1= On
Ignore a mobile-terminated CSFB page while a VoLTE call is activeefs:/nv/item_files/modem/nas/lte_nas_ignore_mt_csfb_during_volte_call
SRVCC support = 0= Off
SRVCC capability indication from E-UTRAN to UTRAN (TS 23.216)efs:/nv/item_files/modem/nas/nas_srvcc_support
nas_l2g_srvcc_supportunverified = 0
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/nas_l2g_srvcc_support

efs:/nv/item_files/modem/sms (1)

Refresh vote OKlikely = 1= On
Vote TRUE for SIM REFRESHefs:/nv/item_files/modem/sms/mmgsdi_refresh_vote_ok

efs:/nv/item_files/wcdma/rrc (7)

WCDMA RRC featurelikely = 5
WCDMA RRC feature maskefs:/nv/item_files/wcdma/rrc/wcdma_rrc_feature
wcdma_rrc_csfb_skip_sib11_optunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_csfb_skip_sib11_opt
Fast return to LTE after CSFBlikely = 1= On
Return from WCDMA to LTE right after a CSFB callefs:/nv/item_files/wcdma/rrc/wcdma_rrc_fast_return_to_lte_after_csfb
wcdma_rrc_fast_return_to_lte_after_csfb_timerunverified = 208
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_fast_return_to_lte_after_csfb_timer
wcdma_rrc_wtol_cm_supportunverified = 0
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_wtol_cm_support
wcdma_rrc_disable_cpc_fdpchunverified = 0
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_disable_cpc_fdpch
wcdma_rrc_dormancy_supportunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_dormancy_support

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

efs:/sd (1)

efs:/sd/rat_acq_order =

nv (30)

Bannerlikely = "Chatr"
nv:71
RTRE Configurationlikely = 0
nv:855
Acquisition Order Preferencelikely = 0
nv:848
Network Selection Mode Preferencelikely = 0
nv:849
GSM/UMTS SMS Bearer Preferencelikely = 2
nv:909
GSM/UMTS Cell Broadcast SMS Carrier Configurationlikely = 1
nv:1016
GSM/UMTS Cell Broadcast SMS User Preferencelikely = 2
nv:1017
MS SMS Max Number Of SMSlikely = 23
nv:3006
SMS MO Retry Periodlikely = 180
nv:3532
SMS MO Retry Intervallikely = 45
nv:3533
UMTS AMR Codec Preference Configlikely = 15
nv:6850
NAS Release Compliancelikely = 3
nv:4722
Mode preference = 4= Automatic
Digital/Analog Mode Preferencenv:10
Hybrid preference = 1= On
Hybrid CDMA 1x + HDR operationnv:562
CS TO VOIP Fallback Timerlikely = 10
nv:6830
VOIP Cancel Retry Timerlikely = 10
nv:6831
AAGPS Default QoS Timelikely = 64
nv:1918
AAGPS Positioning Modes Supportedlikely = 65407
nv:1920
RRC Integrity Enabledlikely = 1
nv:880
RRC Ciphering Enabledlikely = 1
nv:881
RRC Fake Security Enabledlikely = 0
nv:882
GPRS Multi Slot Classlikely = 33
nv:911
Anite GCF = 0= Off
GPRS Enable Anite GCF 51.010nv:947
EDGE Multislot Classlikely = 33
nv:2509
DTM Feature Supportlikely = 0
nv:3628
EDTM Feature Supportlikely = 0
nv:4209
GPRS GEA Algorithms Supportedlikely = 7
nv:4432
MGRF Supportedlikely = 1
nv:5895
ENHANCED HPLMN SRCH TBLlikely =
nv:6844
HSDPA Categorylikely = 24
3GPP HSDPA UE categorynv:4118

Commercial-TMO in the Qualcomm modem firmware of SP1A.210812.016.C2.

Header
MCFG version0801053c
LabelCommercial-TMO
Version3c050108
Base version11050108
Capability04000000
Digestn´;¦ÐŽ'€5*&÷Im’Vwڗ¼Õb=Kqµ*M
Trailer version0001
Selected by (15)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC31026any SIM
MCC-MNC31031any SIM
MCC-MNC310160any SIM
MCC-MNC310200any SIM
MCC-MNC310210any SIM
MCC-MNC310220any SIM
MCC-MNC310230any SIM
MCC-MNC310240any SIM
MCC-MNC310250any SIM
MCC-MNC310260any SIM
MCC-MNC310270any SIM
MCC-MNC310310any SIM
MCC-MNC310490any SIM
MCC-MNC310660any SIM
MCC-MNC310800any SIM
Settings (142)

efs:/data (9)

ds_dsd_attach_profile.txtunverified = "Attach_Profile_ID:1;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_dsd_attach_profile.txt
iwlan_s2b_config.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/iwlan_s2b_config.xml
ds_andsf_config.txtunverified = "andsf_rule_mgr_active:1; lte_meas_alpha:50; lte_sampling_interval:1000; lte_avg_interval:5000; wifi_meas_alpha:65; wifi_sampling_interval:1000; wifi_avg_interval:5000; cdma_1x_meas_alpha:50; cdma_1x_avg_interval:6000; cdma_1x_acq_hyst_interval:3000; cdma_1x_lost_hyst_interval:3000; cdma_1x_sampling_interval:2000; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_andsf_config.txt
Default ANDSFlikely =
ANDSF Wi-Fi/cellular steering policy (TS 24.312)efs:/data/default_andsf.xml
andsf.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/andsf.xml
threshold1.txtunverified = "rssi_high:-85; is_rssi_high_valid:1; rssi_low:-85; is_rssi_low_valid:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/threshold1.txt
threshold2.txtunverified = "rssi_high:-65; is_rssi_high_valid:1; rssi_low:-65; is_rssi_low_valid:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/threshold2.txt
threshold3.txtunverified = "rssi_high:-75; is_rssi_high_valid:1; rssi_low:-75; is_rssi_low_valid:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/threshold3.txt
threshold4.txtunverified = "rssi_high:-78; is_rssi_high_valid:1; rssi_low:-78; is_rssi_low_valid:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/threshold4.txt

efs:/Data_Profiles (5)

efs:/Data_Profiles/Profile1 =
efs:/Data_Profiles/Profile2 =
efs:/Data_Profiles/Profile3 =
efs:/Data_Profiles/Profile4 =
efs:/Data_Profiles/Profile5 =

efs:/efsprofiles (1)

efs:/efsprofiles/overideconfig = " [SIPConfig:GeoLocation] #enable or disable location info inclusion in regular calls iEnableCellInfoInPANI = 0 #enable or disable location info inclusion in regular calls *iEnableLocInfoInNormalCall = 0 #enable or disable location info inclusion in emergency calls iEnableLocInfoInEmergencyCall = 1 #to set the threshold for uncertainty validation fUnCertaintyThreshold = 0.0 [QIPCALL:H264_2] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 117 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 118 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_1] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 115 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 116 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_0] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 7 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 0 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 0 #AS value if IPv6 is used ipv6_AS_value = 416 #Max Bitrate bitrate_max = 384 #Preffered bitrate bitrate_preferred = 384 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 416 [QIPCALL:EVS_0] #channel aware setting ch_aw_recv = 2 #This config is used for hf only hf_only = 0 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_NB_SWB #This config is used for bit rate. It has to be in DECIMAL format. BitRate = 31 [QIPCALL:EVS_1] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, *Bandwidth = 5 #This config is used for bit rate. *BitRate = 31 [QIPCALL:EVS_2] #channel aware setting ch_aw_recv = -1 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [SMSDAN:USSDSettings] #This config item controls the Language String to be used. ussdLangString = "" [QIPCALL:H265_2] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationTimers] #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for SSIM device wlanGaurdTimer = 7 #This config item controls the Register configuration for the network-initiated De reg Timer value. networkInitiatedDeRegistrationTimer = 0 #This config item controls the Retry timer for permanent PDP failures pdnRetryLongTimer = 10 #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for MSIM device wlanGaurdTimerMSIM = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for SSIM device wwanGaurdTimer = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for MSIM device wwanGaurdTimerMSIM = 10 #This config item controls the Retry timer for temporary failures pdnRetryShortTimer = 60 [QIPCALL:H265_0] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [QIPCALL:H265_1] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Ut:UtConfiguration] #This config is required to configure the server responses for which UT is to be blocked permanently BlockUtResponseCodes = "" #This config item controls the media element type for Call Barring Service. 0:No media tag support, 1:One media tag per media type, 2: include both audio and video tags mediaElementSupportForCB = 0 #This config item specifies if the realm is to trimmed or not. 0:Not enabled(default), 1:enabled isTrimRealmEnabled = 0 #This config item specifies if IR92v10 is enabled or not. 0:Not enabled(default), 1:enabled isIr92V10Enabled = 0 #This config item controls the time for which the PDN needs to be kept Active after a SS request is completed pdnHysTimerValue = 0 #This config item controls the Maximum time within which a Response should be sent to UI #For SS over UT *maxResponseTimerValue = 20 #This config item controls the action item when there is no SIB value for CB request. 0:Default, 1:Reject, 2:Audio Only, 3:Both Audio and Video emptySIBUsageForCB = 0 #This config item controls the action item. When a rule id is not present in a server xml, a request is not allowed. It is used on VDF-Portugal only now. 0:Not to check a rule ID(Default), 1:Block a request when rule ID is not present in a server xml blockIfRuleIDAbsent = 0 [SIPConfig:FeatureFlags] #enable or disable sip instance inclusion in contact header IsSipInstanceNeeded = 0 #enable or disable Cellular-Network-Info header IsCNIEnabled = 1 #enable or disable header compact form IsCompactFormEnabled = 1 #enable or disable IsUIReadyStatusCheckNeeded IsUIReadyStatusCheckNeeded = 0 #disable StopTimerBon1xx once 1xx response is not received StopTimerBon1xx = 0 #enable or disable IsImsiNeededForContactHeader IsImsiNeededForContactHeader = 0 [QIPCALL:ImsVoiceSrvccConfig] #This config is required to enable bSRVCC. #Google Mode bSrvccEnabled *bSrvccEnabled = 1 #This config is required to enable aSRVCC. aSrvccEnabled = 1 #This config is required to enable mid call SRVCC. #Google Mode midcallSrvccEnabled *midcallSrvccEnabled = 1 [QIPCALL:ImsRtcpConfig] #This config is required to configure the RR bandwidth for Video. rrForVideo = 6000 #This config is required to configure the timer for RTCP #monitoring. *rtcpLinkAlivenessTimer = 30 #This config is required to configure the RS bandwidth for Audio. rsForAudio = 600 #This config is required to disbale/enable the RTCP monitoring. disableRTCPMonitoring = 0 #This config is required to configure the timer for RTCP #Reporting in VT call. rtcpReportingIntervalInVideo = 2 #This config is required to configure the RS bandwidth for Video. rsForVideo = 5200 #This config is required to configure the RR bandwidth for Audio. rrForAudio = 2000 [QIPCALL:AMR_4] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:G711_2] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMA [QIPCALL:G711_1] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:G711_0] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:AMR_0] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_1] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_2] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:AMR_3] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:ImsVoiceQoSConfig] #This config is required to enable sending SDP answer in PRACK #for 183 if the local qos is granted before 183 response is recvd by #the UE. qosOptimization = 0 #This config is required to configure the timer for dedicated #bearer allocation. qosReservationTimer = 10000 #This config is required to enable set the desired qos strength #for local and remote UEs. qosDesiredStrength = 1 #This config is required to enable 183 for Reneg qosMc183 = 0 #This config is required to configure if the UE must wait for #video dedicated bearer allocation during call setup. localQosResReqVideo = 1 #This config is required to configure if the UE must wait for #text dedicated bearer allocation during call setup. localQosResReqText = 1 #This config is required to configure the early QoS timer for video dedicated #bearer allocation. earlyQosReservationTimer = 0 #This config is required to enable Qos precondition negotiation #in SDP. qosPreconditionsEnabled = 1 #This config is required to enable Qos MC precondition negotiation #in SDP. qosMcPreconditionsEnabled = 0 #This config is required to configure the MBR threshold. iMBRthresholdValue = 0 #This config is required to configure if the UE must wait for #audio dedicated bearer allocation during call setup. localQosResReqAudio = 1 #This config is required to configure if the initial SDP #directionality should be inactive in REINVITE when preconditions are #used reinviteSdpDirInactive = 0 #This config is required to enable MBR check for video bearer. qosMbrVideoCheckReqEnabled = 1 #This config is required to configure if the initial SDP #directionality should be inactive when preconditions are used. inviteSdpDirInactive = 0 #This config is required to enable MBR check for audio bearer. qosMbrAudioCheckReqEnabled = 0 #This config is required to enable mid-call precondition for Call Hold/Resume qosMcHold = 0 [Ut:XCAPCommonHC] #This config item controls the configuration of BSF server address bsfServerAddress = "" #This config item controls whether GBA_U is enabled or not useGBAMEOnly = 0 #This config item controls whether ims prefix is added or not for Ub request like as bsf.ims.mnc005.mcc232.pub.3gppnetwork.org includeIMSPrefixForUSIM = 0 #This config item controls whether BSF server supports TLS bsfServerTlsSupport = 1 [Registration:RegistrationFeatureFlags] #This config item specifies if the sub operator is APTG and special handling is required for Options unsubscribed error or not. 0:Not enabled(default), 1:enabled optionsUnsubscribedSpecialHandling = 0 [QIPCALL:EVS_3] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:ImsVoiceSessionTimerConfig] #This config is required to configure the session refresher shall #be UAC/UAS. sessionRefresherType = QP_CONFIG_SES_REFRESHER_UAC #This config is required to enable session timer support. sessionTimerEnabled = 1 #This config is required to enable Stand Alone Session Expiry #negotiation. standAloneEnabled = 1 #This config is required to enable Sesssion Expiry timer #negotiation. allowSeNegotiation = 0 #This config is required to configure the method for session #referesh shall be REINVITE/UPDATE. sessionRefresherMethod = QP_CONFIG_SES_REFRESH_UPDATE [QIPCALL:ImsVoiceConfig] #This config is required to configure the Emergency call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network emergencyCallCancelTimer = 500 #This config is required to configure the default WPS invite duration. wpsInviteDuration = 0 #This config is required to enable 380 response validation as per #3GPP. enableAlternateSrvRspCheck = 1 #This config is required to set the display text priority #subscription. displayTextPriority = 3 #This config is required to include MTT USSD feature tag into IMS registration. ussdAcceptContact = "+g.3gpp.nw-init-ussi" #This config is required to configure the default invite retry counter. inviteRetryCounter = 2 #This config is required to select the default emergency URI if sub category matches with multiple entries e911SelectDefURI = 0 #This config is required to disable early media timer. disableEarlyMediaTimer = 0 #This config is required to configure the voice call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network voiceCallCancelTimer = 0 #This config is required to enable PEM header in 183. enablePEMHeaderIn183 = 0 #This config is required to configure the default URI type #(SIP/TEL) for MO calls. uriType = QPE_IMS_URI_SIP #This config is required to configure the terminating identity presentation or restriction type. terminatingIdentityService = 0 #This config is required to configure the default WPS fallback duration. wpsFallbackDuration = 0 #This config is required to configure the ignoring of AS value ignoreASValidation = 0 #This config is required to set error code for CT submode. sessionEndResponseTimeout = 0 #This config is required to enable VoWIFI Call Continuity to LTE NonVOPS. enableVCCtoLTENonVOPS = 0 #This config is required to enable emergency call operation in CS-only mode. emergCallCSOnly = 0 #This config is required to configure number format during roaming, geo-local/home-local phoneContextPolicy = QPE_IMS_PHONE_CONTEXT_GEO_LOCAL #This config is required to set the phone context domain source. PhoneContextSource = QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_MCC_MNC #This config is required to set preconditions enabled with qos events ignored. ignoreQOSEvents = 0 #This config is required to enable the MT USSI. enableMTUSSI = 1 #This config is required to configure the privacy type. Set 0: for none, 1: for id, 2: for header. privacyType = 2 [Registration:RegistrationDefaultParams] #This config item will be used to configure default UserName to register with Network userName = "" #This config item will be used to configure default authType to register with Network authType = "" #This config item will be used to configure default Display Name to register with Network displayName = "" #This config item will be used to configure default DomainName to register with Network domainName = "" #This config item will be used to configure default authSecertKey authSecertKey = "465b5ce8b199b49faa5f0a2ee238a6bc" #This config item will be used to configure default Private URI to register with Network privateURI = "" #This config item will be used to configure default is3GPP is3GPP = 0 #This config item will be used to configure default Realm to register with Network realm = "" #This config item will be used to configure default public URI to register with Network publicURI = "" #This config item will be used to configure default Password to register with Network password = "" [QIPCALL:ImsVoiceSuppsConfig] #This config is required to configure the timer for Notify #response to Refer. notifyReferRspTimer = 20 #This config is required to end the conference call automatically #when all other participants left the call. endConfCallUponNoParticipant = 1 #This config is required to enable presentation of the call to #the user when UE is already in two calls (active and held). *presentThirdCalltoUser = 1 #This config is required to configure the conference event #package subscription timer. confEvtSubTimer = 3600 #This config is required not to send unsubscribe to NW for conference call when there is #no notify-terminated received. isUnsubcribeDisabled = 0 #This config is required to configure the dialog for the #conference event subscribe request. confEvtSubOutOfDialog = 1 #This config is required to configure the three party conf URI #for KDDI. threePartyConfFactoryUri = "" #This config is required to enable the conference event package #subscription. confEvtPakageEnabled = QPE_IMS_CONF_PCKG_ORIGINATOR_ONLY [QIPCALL:ImsRtcpXRConfig] #This config is required to enable RTCP-XR support. rtcpXrEnabled = 0 [SMSDAN:DANSettings] #This config item controls QIPCall 1x SMS and Voice Enabled (0:DAN SMS can be sent only if there is no voice call. #1:Enabled; DAN and MO SMS can be sent even when a voice call is up). smsAndVoiceOver1x = 0 #This NV item is used for configuring the transport channel preference on which DAN is to be sent. channelPreference = 0 #This config item controls the DAN Retry Timer Interval Duration (In ms) retryTimer = 0 #This config item controls the DAN Max Retry Counter maxRetryCount = 0 #This NV item is used for controlling DAN Hysterisis Timer Duration hysterisisTimer = 0 [QIPCALL:H263_0] #payload type number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationCounters] #This config item controls the Immediate Retry timer for failures maxPDNIntermediateRetries = 1 [QIPCALL:ImsVideoConfig] #This config is required to configure the LTR mode. ltrMode = QP_CONFIG_IMS_LTR_ENABLED_RESTRICT_QC #This config is required to set the video_capability_for_invite_no_sdp for #incoming INVITE without SDP. video_capability_for_invite_no_sdp = 1 #Internal:This config is required to store peer supported #services trackPeerServices = 1 [SIPConfig:Transport] #above this size choose TCP and value 0 means disable tcp port open on UE TCPThresholdValue = 1230 #enable or disable TCP Static threshold TCPEnableStaticThreshold = 0 [SIPConfig:StandardTimers] #sip registration expires value SipRegValue = 0 #sip reg subscription expires value SipSubscribeValue = 0 [SIPConfig:IPSec] #integrity scheme for ipsec sip messages IntScheme = 3 #encryption algo for ipsec sip messages EncAlgo = 7 [SMSDAN:SMSSettings] #This config item controls the SMS Feature tag smsAcceptContact = "+g.3gpp.smsip" [MEDIA:MediaCommon] #This config item specifies if overall rate adaptation feature is enabled or not. audioRAEnable = 1 #This config item specifies maximum mtu size for the rtp packet mtuSize = 1400 [Registration:RegistrationSettings] #This config item controls Registration over IWLAN in airplane mode enableRegistrationInLPM = 2 #This config item controls PCSCF IP fallback feature pcscfBasedIPFallback = 0 #This config item controls TTY over IMS enableTTYOverIMS = 0 #This config item controls Reregistration over WIFI during Activate 3G call BlockRegOverWifiWhileActiveCSCall = 1 #This config item controls Reregistration over WIFI during Activate 1x call BlockRegOverWifiWhileActive1XCall = 0 [Ut:XcapHCConfigUserProfile] #This config item controls the configured user name configUserName = "" #This config item controls the configured user name configUserPassword = "" [DPL:Common] #This config item determines usage to read the SIM card parameters (ISIM, USIM ) etc #Possible INTEGER values for override are as follows: #QPE_CONFIG_IMS_FILE_READ = 0 --> File Read Param Source #QPE_CONFIG_IMS_NV_READ = 1 --> NV Read Param Source #QPE_CONFIG_IMS_CARD_READ = 2 --> Card Read Param Source to read from ISIM #QPE_CONFIG_IMS_FILE_READ_AUTH_ENABLED = 3 --> File Read Param Auth enabled (ONLY for testing) #QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED = 4 --> USIM fallback enabled ParamSrc = QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED [QIPCALL:ImsMediaProfileConfig] #This config is required to video codec profile list on 4G. VideoProfile1 = "H264_0" #This config is required to audio codec profile list. *AudioProfile1 = "EVS_1_127;AMR_1_102;AMR_4_103;AMR_0_104;AMR_2_105" [QIPCALL:ImsVoWifiConfig] #This config is required to configure the wifi connectivity #backoff timer. wifiConnectivityBackoffTimer = 10 [MEDIA:MediaDscp] #This config item specifies dscp value for audio audio = 46 #This config item specifies dscp value for video video = 46 [QIPCALL:ImsVideoModifyConfig] #This config is required to configure the timer in msecs for #waiting on user response to the incoming upgrade req. localUpgradeAcceptTimer = 20000 #This config is required to configure the timer in secs for #response from the peer to the sent upgrade req. remoteUpgradeRejectTimer = 40 [SIPConfig:CustomTimers] #reliable response retry timer cap TRelResponseRetry = 0 "

efs:/google (5)

efs:/google/paris_version = "g670_default_32_201910022029 "
efs:/google/cust_ims_ua_enable = 1
efs:/google/cust_modem_features = 991
efs:/google/fd_timers.conf = 107374182570000x9c400004268
efs:/google/user_agent_template = "T-Mobile VoLTE-ePDG-IR94-RTT-ussd Google/[MI__ap] [SW__ap]"

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -119; LTEDLRSRPThresholdTargetHigh = -117; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 3; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -15; WCDMA_TRAT_ECIO_Threshold = -10; WCDMA_SRAT_RSCP_Threshold = -115; WCDMA_TRAT_RSCP_Threshold = -110; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -127; LTE_RSRP_Single_in = -120; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -190; LTE_SNR_Single_out = 70; LTE_SNR_Single_in = 80; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/data/3gpp (1)

3GPP MTUlikely = 1440
Default PDN MTU in bytesefs:/nv/item_files/data/3gpp/ds_3gpp_mtu

efs:/nv/item_files/data/dsd (1)

data_wlan_throttle_timerunverified = 30
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/dsd/data_wlan_throttle_timer

efs:/nv/item_files/data/wlan_config (4)

wlan_offload_configunverified = 2
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wlan_offload_config
iwlan_s2b_mtu_valunverified = 1280
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/iwlan_s2b_mtu_val
rat_pref_for_non_ims_pdnunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/rat_pref_for_non_ims_pdn
wifi_oos_linger_timerunverified = 3
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wifi_oos_linger_timer

efs:/nv/item_files/datamodem/protocols (2)

efs:/nv/item_files/datamodem/protocols/ip6_default_mtu = 1440
efs:/nv/item_files/datamodem/protocols/clat_config_info =

efs:/nv/item_files/gps/cgps/sm (2)

gnss_lppe_cp_configunverified = 19
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lppe_cp_config
gnss_lpp_enableunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lpp_enable

efs:/nv/item_files/ims (25)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified = "T-Mobile VoLTE-RCS-ePDG-IR94-RTT-ussd"
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 1= Enabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 9
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item
qipcall_notify_refer_response_durationunverified = 20
IMS setting: IMSefs:/nv/item_files/ims/qipcall_notify_refer_response_duration

efs:/nv/item_files/mcfg (1)

om_listunverified = empty
MCFG setting: Modem configuration (MBN) selection and refreshefs:/nv/item_files/mcfg/om_list

efs:/nv/item_files/modem (1)

efs:/nv/item_files/modem/mmodelte_disable_duration = 0

efs:/nv/item_files/modem/data/3gpp/dsmgr (1)

emergency_apn_typeunverified = 1310730x20001
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/dsmgr/emergency_apn_type

efs:/nv/item_files/modem/data/3gpp/ps (2)

modem_def_prof_supportunverified = No value
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/modem_def_prof_support
check_ehplmn_listunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/check_ehplmn_list

efs:/nv/item_files/modem/data/epc (1)

PDN throttling configlikely = "FAILURE_TIMER_5:20; "
Carrier PDN throttling timersefs:/nv/item_files/modem/data/epc/pdn_throttling_config.txt

efs:/nv/item_files/modem/lte/rrc/cap (4)

fgiunverified = 21443375980x7fcffebe
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi
lte_feature_disableunverified =
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/lte_feature_disable
fdd_cap_r11unverified = 83886080x800000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fdd_cap_r11
fgi_r10unverified = 16131031040x60260000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi_r10

efs:/nv/item_files/modem/lte/rrc/csp (1)

band_priority_listunverified = 666260x10442
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/csp/band_priority_list

efs:/nv/item_files/modem/mmode (12)

lte_emerg_redialunverified = 657930x10101
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_emerg_redial
SMS onlylikely = 0= Off
Register for SMS onlyefs:/nv/item_files/modem/mmode/sms_only
UE usage settinglikely = 0= Voice centric
TS 24.301 UE usage settingefs:/nv/item_files/modem/mmode/ue_usage_setting
SMS domain preference = 1= PS (IMS) SMS preferred
SMS over IMS preferenceefs:/nv/item_files/modem/mmode/sms_domain_pref
SMS mandatorylikely = 1= On
SMS is mandatory for the device (block LTE if IMS/SGs SMS registration fails)efs:/nv/item_files/modem/mmode/sms_mandatory
Voice domain preference = 3= IMS PS voice preferred
E-UTRAN voice domain (TS 24.301 9.9.3.44)efs:/nv/item_files/modem/mmode/voice_domain_pref
supplement_service_domain_prefunverified = 1
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/supplement_service_domain_pref
mid_call_srvcc_infounverified = 10995129077770x10000138801
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/mid_call_srvcc_info
wifi_configunverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/wifi_config
allow_cs_page_during_mt_volte_callunverified = 1793
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/allow_cs_page_during_mt_volte_call
custom_emerg_infounverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/custom_emerg_info
LTE band preferencelikely = ffffffffffffffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref

efs:/nv/item_files/modem/mmode/sd (2)

full_srv_req_in_emerg_extunverified = 1
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/sd/full_srv_req_in_emerg_ext
full_srv_req_in_emergunverified = 0
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/sd/full_srv_req_in_emerg

efs:/nv/item_files/modem/nas (3)

Ignore MT CSFB during VoLTE = 1= On
Ignore a mobile-terminated CSFB page while a VoLTE call is activeefs:/nv/item_files/modem/nas/lte_nas_ignore_mt_csfb_during_volte_call
mm_manual_search_timer_valueunverified =
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/mm_manual_search_timer_value
reg_nv_itemsunverified =
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/reg_nv_items

efs:/nv/item_files/modem/sms (1)

efs:/nv/item_files/modem/sms/sms_retry_limit = 0

efs:/nv/item_files/modem/uim/gba (5)

bsf_addressunverified =
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/gba/bsf_address
custom_realmunverified = 1
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/gba/custom_realm
custom_user_agent_tmpiunverified = 1
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/gba/custom_user_agent_tmpi
http_header_imeiunverified = "X-TMUS-IMEI"
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/gba/http_header_imei
access_point_nameunverified = "tmus"
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/gba/access_point_name

efs:/nv/item_files/modem/uim/gstk (1)

feature_bmskunverified = 1342177980x8000046
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/gstk/feature_bmsk

efs:/nv/item_files/therm_monitor (1)

efs:/nv/item_files/therm_monitor/config_test.ini = "[pa] thermal_zone pa sampling 1000 1000 1000 1000 thresholds 70 75 80 528 thresholds_clr -273 68 73 78 actions mitigate mitigate mitigate mitigate action_info 0 1 2 3"

efs:/nv/item_files/wcdma/rrc (6)

wcdma_rrc_csfb_skip_sib11_optunverified = 0
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_csfb_skip_sib11_opt
Fast return to LTE after CSFBlikely = 1= On
Return from WCDMA to LTE right after a CSFB callefs:/nv/item_files/wcdma/rrc/wcdma_rrc_fast_return_to_lte_after_csfb
wcdma_rrc_fast_return_to_lte_after_csfb_timerunverified = 2000
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_fast_return_to_lte_after_csfb_timer
WCDMA RRC featurelikely = 5
WCDMA RRC feature maskefs:/nv/item_files/wcdma/rrc/wcdma_rrc_feature
wcdma_rrc_dormancy_supportunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_dormancy_support
wcdma_rrc_idle_featureunverified = 479
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_idle_feature

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

efs:/sd (1)

efs:/sd/rat_acq_order =

nv (42)

Bannerlikely = "TMO"
nv:71
Acquisition Order Preferencelikely = 0
nv:848
Network Selection Mode Preferencelikely = 0
nv:849
GSM/UMTS SMS Bearer Preferencelikely = 2
nv:909
Band Class Preferencelikely = 65535
nv:441
Band preference bits 16-31 = 49151= GSM 450, GSM 480, GSM 750, GSM 850, GSM railways 900, GSM PCS 1900, WCDMA B1 2100, WCDMA B2 1900, WCDMA B3 1800, WCDMA B4 1700, WCDMA B5 850, WCDMA B6 800, bit 12, bit 13, bit 15
Expand Band Preference 16 To 32 Bitsnv:946
Bits 32 To 63 Of Band Preflikely = 4294967295= bit 0, bit 1, bit 2, bit 3, bit 4, bit 5, bit 6, bit 7, bit 8, bit 9, bit 10, bit 11, bit 12, bit 13, bit 14, bit 15, WCDMA B7 2600, WCDMA B8 900, WCDMA B9 1700, bit 19, bit 20, bit 21, bit 22, bit 23, bit 24, bit 25, bit 26, bit 27, WCDMA B19 850, WCDMA B11 1500, bit 30, bit 310xffffffff
nv:2954
GSM/UMTS Cell Broadcast SMS Carrier Configurationlikely = 1
nv:1016
GSM/UMTS Cell Broadcast SMS User Preferencelikely = 1
nv:1017
MS SMS Max Number Of SMSlikely = 23
nv:3006
SMS MO Retry Periodlikely = 180
nv:3532
SMS MO Retry Intervallikely = 45
nv:3533
DTM Feature Supportlikely = 0
nv:3628
DTM Multislot Classlikely = 3
nv:3629
UMTS AMR Codec Preference Configlikely = 13
nv:6850
NAS Release Compliancelikely = 3
nv:4722
Disable CM Call Typelikely = 2
nv:5280
Mode preference = 31= GWL
Digital/Analog Mode Preferencenv:10
Hybrid preference = 1= On
Hybrid CDMA 1x + HDR operationnv:562
CS TO VOIP Fallback Timerlikely = 10
nv:6830
VOIP Cancel Retry Timerlikely = 10
nv:6831
ENS Enabledlikely = 0= Off
Enhanced Network Selectionnv:3461
MGRF Supportedlikely = 1
nv:5895
ENHANCED HPLMN SRCH TBLlikely =
nv:6844
GPRS Multi Slot Classlikely = 12
nv:911
EDA Feature Supportlikely = 1
nv:3630
GERAN Feature Pack 1likely = 1
nv:2512
EDTM Feature Supportlikely = 0
nv:4209
RRC Integrity Enabledlikely = 1
nv:880
RRC Ciphering Enabledlikely = 1
nv:881
RRC Fake Security Enabledlikely = 0
nv:882
WCDMA RX Diversity Controllikely = 3
nv:3851
WCDMA HSUPA CM Controllerlikely = 1
nv:5090
CPU Based Flow Controllikely = 1
nv:4261
eHRPD Authentication Modelikely = 1
nv:6862
Anite GCF = 0= Off
GPRS Enable Anite GCF 51.010nv:947
GPRS GEA Algorithms Supportedlikely = 3
nv:4432
AAGPS Default QoS Timelikely = 32
nv:1918
AAGPS Positioning Modes Supportedlikely = 63423
nv:1920
GSM/UMTS Cell Broadcast SMS Service Tablelikely
nv:1014/1
ActiveService = 1
ServiceFrom = 4370
ServiceTo = 4370
Selected = 1
Label = 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
LabelEncoding = 0
BcAlert = 0
MaxMessages = 0
GSM/UMTS Cell Broadcast SMS Service Table Sizelikely = 13
nv:1015
RTRE Configurationlikely = 0
nv:855

IMSFreedom in the Qualcomm modem firmware of SP1A.210812.016.C2.

Header
MCFG version08015123
LabelIMSFreedom
Version24510108
Base version24510108
Capability14000000
Digest’_1%ÕUÖ÷°xKãæšÕ[‘ùo­_ÿ52†
Trailer version0001
Selected by (1)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC302490any SIM
Settings (120)

efs:/data (5)

ds_dsd_attach_profile.txtunverified = "Attach_Profile_ID:1;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_dsd_attach_profile.txt
iwlan_s2b_config.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/iwlan_s2b_config.xml
Default ANDSFlikely =
ANDSF Wi-Fi/cellular steering policy (TS 24.312)efs:/data/default_andsf.xml
andsf.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/andsf.xml
ds_eps_kamgr_pdn.txtunverified = No value
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_eps_kamgr_pdn.txt

efs:/Data_Profiles (5)

efs:/Data_Profiles/Profile1 =
efs:/Data_Profiles/Profile2 =
efs:/Data_Profiles/Profile3 =
efs:/Data_Profiles/Profile4 =
efs:/Data_Profiles/Profile5 =

efs:/data/3gpp/throttling (1)

srv_req_throt_config.txtunverified = "FAILURE_TIMER_5:20;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/3gpp/throttling/srv_req_throt_config.txt

efs:/efsprofiles (1)

efs:/efsprofiles/overideconfig = " [Ut:XCAPCommonHC] #This config item controls the configuration of BSF server address #b/154133167: Enable GBA *bsfServerAddress = "bsf.mobilefrdm.ca" [QIPCALL:ImsVoiceConfig] #This config is required to configure the terminating identity presentation or restriction type. *terminatingIdentityService = 0 [QIPCALL:ImsVoiceSuppsConfig] #This config is required to enable presentation of the call to #the user when UE is already in two calls (active and held). *presentThirdCalltoUser = 1 [SIPConfig:Transport] #above this size choose TCP and value 0 means disable tcp port open on UE *TCPThresholdValue = 1300 #enable or disable TCP Static threshold *TCPEnableStaticThreshold = 1 "

efs:/google (4)

efs:/google/paris_version = "g670_default_32_201910022029 "
efs:/google/cust_ims_ua_enable = 1
efs:/google/user_agent_template = "Freedom [MI__ap] [SW__ap]"
efs:/google/fd_timers.conf = 85899345940x200000002

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -118; LTEDLRSRPThresholdTargetHigh = -115; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 3; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -15; WCDMA_TRAT_ECIO_Threshold = -10; WCDMA_SRAT_RSCP_Threshold = -115; WCDMA_TRAT_RSCP_Threshold = -110; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -125; LTE_RSRP_Single_in = -118; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -170; LTE_SNR_Single_out = 75; LTE_SNR_Single_in = 85; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/data/3gpp (2)

3GPP MTUlikely = 1500
Default PDN MTU in bytesefs:/nv/item_files/data/3gpp/ds_3gpp_mtu
RPM paramslikely =
Radio Policy Manager retry limits (10 bytes)efs:/nv/item_files/data/3gpp/rpm_params

efs:/nv/item_files/data/3gpp/lteps (1)

carrier_aggregation_display_thresholdunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/3gpp/lteps/carrier_aggregation_display_threshold

efs:/nv/item_files/data/dsd (1)

ds_apn_switchingunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/dsd/ds_apn_switching

efs:/nv/item_files/data/wlan_config (1)

wlan_offload_configunverified = 2
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wlan_offload_config

efs:/nv/item_files/datamodem/protocols (1)

efs:/nv/item_files/datamodem/protocols/ip6_default_mtu = 1200

efs:/nv/item_files/gps/cgps/sm (4)

gnss_1x_up_supl_enableunverified = 0
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_1x_up_supl_enable
gnss_agps_rat_pref_configunverified = 167769610xffff01
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_agps_rat_pref_config
gnss_assisted_glo_protocol_selectunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_assisted_glo_protocol_select
gnss_lpp_enableunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lpp_enable

efs:/nv/item_files/ims (24)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 1= Enabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 2
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item

efs:/nv/item_files/modem (1)

LTE connection controlunverified = 1
efs:/nv/item_files/modem/lte_connection_control

efs:/nv/item_files/modem/data (1)

dynamic_port_cfgunverified = 2
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/dynamic_port_cfg

efs:/nv/item_files/modem/data/3gpp (3)

umts_nw_initiated_qos_supportunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/umts_nw_initiated_qos_support
Call before PS attachlikely = 0= Off
Allow data-call origination before PS attachefs:/nv/item_files/modem/data/3gpp/call_orig_allowed_before_ps_attach
L_to_W_qos_continuityunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/L_to_W_qos_continuity

efs:/nv/item_files/modem/data/3gpp/ps (2)

Service request throttle behaviourlikely = 1
Service-request throttling behaviourefs:/nv/item_files/modem/data/3gpp/ps/ser_req_throttle_behavior
ds_3gpp_redial_for_no_causeunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/ds_3gpp_redial_for_no_cause

efs:/nv/item_files/modem/data/dsmgr (1)

wlan_3g_ip_continuity_enabledunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/dsmgr/wlan_3g_ip_continuity_enabled

efs:/nv/item_files/modem/data/epc (1)

PDN throttling configlikely = "FAILURE_TIMER_5:20; "
Carrier PDN throttling timersefs:/nv/item_files/modem/data/epc/pdn_throttling_config.txt

efs:/nv/item_files/modem/lte/rrc/cap (4)

fgiunverified = 21443375980x7fcffebe
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi
fgi_rel9unverified = 32212254720xc0000000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi_rel9
fgi_r10unverified = 10761011200x40240000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi_r10
lte_feature_disableunverified =
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/lte_feature_disable

efs:/nv/item_files/modem/lte/rrc/cep (2)

conn_control_param_cfgunverified = 39337010x3c0605
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cep/conn_control_param_cfg
conn_control_barring_optmz_enableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cep/conn_control_barring_optmz_enable

efs:/nv/item_files/modem/mmode (14)

LTE band preferencelikely = ffffffffff7dffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref
SMS onlylikely = 0= Off
Register for SMS onlyefs:/nv/item_files/modem/mmode/sms_only
UE usage settinglikely = 0= Voice centric
TS 24.301 UE usage settingefs:/nv/item_files/modem/mmode/ue_usage_setting
LTE disable durationlikely = 0
How long LTE stays disabled when CS services are unavailableefs:/nv/item_files/modem/mmode/lte_disable_duration
SMS domain preference = 1= PS (IMS) SMS preferred
SMS over IMS preferenceefs:/nv/item_files/modem/mmode/sms_domain_pref
SMS mandatorylikely = 1= On
SMS is mandatory for the device (block LTE if IMS/SGs SMS registration fails)efs:/nv/item_files/modem/mmode/sms_mandatory
Voice domain preference = 3= IMS PS voice preferred
E-UTRAN voice domain (TS 24.301 9.9.3.44)efs:/nv/item_files/modem/mmode/voice_domain_pref
ue_based_cwunverified = 257
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/ue_based_cw
lte_emerg_redialunverified = 657930x10101
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_emerg_redial
lte_nas_ignore_mt_csfb_during_volte_callunverified = 0
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_nas_ignore_mt_csfb_during_volte_call
supplement_service_domain_prefunverified = 3
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/supplement_service_domain_pref
mid_call_srvcc_infounverified = 10995129077770x10000138801
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/mid_call_srvcc_info
wifi_configunverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/wifi_config
lte_bandpref_extn_65_256unverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_bandpref_extn_65_256

efs:/nv/item_files/modem/mmode/sd (1)

full_srv_req_in_emerg_extunverified = 1
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/sd/full_srv_req_in_emerg_ext

efs:/nv/item_files/modem/nas (1)

Force LAU on LAI change (emergency)likely = 1= On
Force a location-area update on LAI change during an emergency callefs:/nv/item_files/modem/nas/nas_lai_change_force_lau_for_emergency

efs:/nv/item_files/modem/sms (1)

Refresh vote OKlikely = 1= On
Vote TRUE for SIM REFRESHefs:/nv/item_files/modem/sms/mmgsdi_refresh_vote_ok

efs:/nv/item_files/modem/uim/mmgsdi (1)

device_features_status_listunverified =
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/mmgsdi/device_features_status_list

efs:/nv/item_files/wcdma (1)

rrc_ganss_support_nvunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc_ganss_support_nv

efs:/nv/item_files/wcdma/rrc (7)

wcdma_rrc_wtol_cm_supportunverified = 0
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_wtol_cm_support
wcdma_ppac_supportunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_ppac_support
WCDMA RRC featurelikely = 0
WCDMA RRC feature maskefs:/nv/item_files/wcdma/rrc/wcdma_rrc_feature
wcdma_rrc_fast_return_to_lte_after_csfb_timerunverified = 2000
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_fast_return_to_lte_after_csfb_timer
wcdma_rrc_dormancy_supportunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_dormancy_support
rrc_b66_plmn_supportunverified = 99128349818910x90403020003
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/rrc_b66_plmn_support
wcdma_rrc_idle_featureunverified = 479
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_idle_feature

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

efs:/sd (1)

efs:/sd/rat_acq_order =

nv (26)

GPRS Multi Slot Classlikely = 10
nv:911
EDA Feature Supportlikely = 0
nv:3630
UIM First Instruction Classlikely = 1
nv:896
GSM AMR Call Configurationlikely = 1
nv:1302
AAGPS Default QoS Timelikely = 64
nv:1918
AAGPS Positioning Modes Supportedlikely = 65407
nv:1920
AAGPS Use Transport Securitylikely = 1= On
Enable user-plane (SUPL) secure transportnv:3758
GNSS SUPL Versionlikely = 131072= 2.0.00x20000
nv:6792
Bannerlikely = "FM_VoLTE"
nv:71
Acquisition Order Preferencelikely = 0
nv:848
Network Selection Mode Preferencelikely = 0
nv:849
GSM/UMTS Cell Broadcast SMS User Preferencelikely = 2
nv:1017
EDGE Multislot Classlikely = 10
nv:2509
MS SMS Max Number Of SMSlikely = 23
nv:3006
SMS MO Retry Periodlikely = 180
nv:3532
SMS MO Retry Intervallikely = 45
nv:3533
Disable CM Call Typelikely = 0
nv:5280
Hybrid preference = 1= On
Hybrid CDMA 1x + HDR operationnv:562
CS TO VOIP Fallback Timerlikely = 10
nv:6830
VOIP Cancel Retry Timerlikely = 10
nv:6831
RRC Integrity Enabledlikely = 1
nv:880
RRC Ciphering Enabledlikely = 1
nv:881
RRC Fake Security Enabledlikely = 0
nv:882
WCDMA RX Diversity Controllikely = 3
nv:3851
WCDMA HSUPA CM Controllerlikely = 1
nv:5090
CPU Based Flow Controllikely = 1
nv:4261

Netherlands-VoLTE-Vodafone in the Qualcomm modem firmware of SP1A.210812.016.C2.

Header
MCFG version080104f8
LabelNetherlands-VoLTE-Vodafone
Versionf8040108
Base versionf3040108
Capability04000000
DigestÀȓ+„ðOØvS2{#‚§÷>Ôü‰}u”H
Trailer version0001
Selected by (1)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC20404any SIM
Settings (92)

efs:/data (5)

ds_dsd_attach_profile.txtunverified = "Attach_Profile_ID:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_dsd_attach_profile.txt
iwlan_s2b_config.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/iwlan_s2b_config.xml
ds_andsf_config.txtunverified = "andsf_rule_mgr_active:1; lte_meas_alpha:50; lte_sampling_interval:1000; lte_avg_interval:5000; wifi_meas_alpha:65; wifi_sampling_interval:1000; wifi_avg_interval:5000; cdma_1x_meas_alpha:50; cdma_1x_avg_interval:6000; cdma_1x_acq_hyst_interval:3000; cdma_1x_lost_hyst_interval:3000; cdma_1x_sampling_interval:2000; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_andsf_config.txt
Default ANDSFlikely =
ANDSF Wi-Fi/cellular steering policy (TS 24.312)efs:/data/default_andsf.xml
andsf.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/andsf.xml

efs:/Data_Profiles (4)

efs:/Data_Profiles/Profile1 =
efs:/Data_Profiles/Profile2 =
efs:/Data_Profiles/Profile3 =
efs:/Data_Profiles/Profile4 =

efs:/data/3gpp (1)

home_plmn_list.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/3gpp/home_plmn_list.xml

efs:/efsprofiles (1)

efs:/efsprofiles/overideconfig = " [SIPConfig:GeoLocation] #enable or disable location info inclusion in regular calls iEnableCellInfoInPANI = 0 #enable or disable location info inclusion in regular calls iEnableLocInfoInNormalCall = 0 #enable or disable location info inclusion in emergency calls iEnableLocInfoInEmergencyCall = 1 #to set the threshold for uncertainty validation fUnCertaintyThreshold = 0.0 [QIPCALL:H264_2] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 117 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 118 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_1] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 115 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 116 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_0] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 7 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 113 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 114 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 384 #Preffered bitrate bitrate_preferred = 384 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:EVS_0] #channel aware setting ch_aw_recv = -1 #This config is used for hf only hf_only = 0 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. It has to be in DECIMAL format. BitRate = 120 [QIPCALL:EVS_1] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. BitRate = 120 [QIPCALL:EVS_2] #channel aware setting ch_aw_recv = -1 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [SMSDAN:USSDSettings] #This config item controls the Language String to be used. ussdLangString = "" [QIPCALL:H265_2] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationTimers] #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for SSIM device wlanGaurdTimer = 7 #This config item controls the Register configuration for the network-initiated De reg Timer value. networkInitiatedDeRegistrationTimer = 0 #This config item controls the Retry timer for permanent PDP failures pdnRetryLongTimer = 5 #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for MSIM device wlanGaurdTimerMSIM = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for SSIM device wwanGaurdTimer = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for MSIM device wwanGaurdTimerMSIM = 10 #This config item controls the Retry timer for temporary failures pdnRetryShortTimer = 60 [QIPCALL:H265_0] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [QIPCALL:H265_1] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Ut:UtConfiguration] #This config is required to configure the server responses for which UT is to be blocked permanently BlockUtResponseCodes = "" #This config item controls the media element type for Call Barring Service. 0:No media tag support, 1:One media tag per media type, 2: include both audio and video tags mediaElementSupportForCB = 0 #This config item specifies if the realm is to trimmed or not. 0:Not enabled(default), 1:enabled isTrimRealmEnabled = 0 #This config item specifies if IR92v10 is enabled or not. 0:Not enabled(default), 1:enabled isIr92V10Enabled = 0 #This config item controls the time for which the PDN needs to be kept Active after a SS request is completed pdnHysTimerValue = 0 #This config item controls the Maximum time within which a Response should be sent to UI maxResponseTimerValue = 0 #This config item controls the action item when there is no SIB value for CB request. 0:Default, 1:Reject, 2:Audio Only, 3:Both Audio and Video emptySIBUsageForCB = 0 #This config item controls the action item. When a rule id is not present in a server xml, a request is not allowed. It is used on VDF-Portugal only now. 0:Not to check a rule ID(Default), 1:Block a request when rule ID is not present in a server xml blockIfRuleIDAbsent = 0 [SIPConfig:FeatureFlags] #enable or disable sip instance inclusion in contact header *IsSipInstanceNeeded = 1 #enable or disable Cellular-Network-Info header IsCNIEnabled = 1 #enable or disable header compact form IsCompactFormEnabled = 0 #enable or disable IsUIReadyStatusCheckNeeded IsUIReadyStatusCheckNeeded = 0 #disable StopTimerBon1xx once 1xx response is not received StopTimerBon1xx = 0 #enable or disable IsImsiNeededForContactHeader IsImsiNeededForContactHeader = 0 [QIPCALL:ImsVoiceSrvccConfig] #This config is required to enable bSRVCC. *bSrvccEnabled = 0 #This config is required to enable aSRVCC. aSrvccEnabled = 1 #This config is required to enable mid call SRVCC. *midcallSrvccEnabled = 0 [QIPCALL:ImsRtcpConfig] #This config is required to configure the RR bandwidth for Video. rrForVideo = 2000 #This config is required to configure the timer for RTCP #monitoring. rtcpLinkAlivenessTimer = 20 #This config is required to configure the RS bandwidth for Audio. rsForAudio = 600 #This config is required to disbale/enable the RTCP monitoring. disableRTCPMonitoring = 0 #This config is required to configure the timer for RTCP #Reporting in VT call. rtcpReportingIntervalInVideo = 1 #This config is required to configure the RS bandwidth for Video. rsForVideo = 600 #This config is required to configure the RR bandwidth for Audio. rrForAudio = 2000 [QIPCALL:AMR_4] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:G711_2] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMA [QIPCALL:G711_1] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:G711_0] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:AMR_0] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_1] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_2] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:AMR_3] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:ImsVoiceQoSConfig] #This config is required to enable sending SDP answer in PRACK #for 183 if the local qos is granted before 183 response is recvd by #the UE. qosOptimization = 0 #This config is required to configure the timer for dedicated #bearer allocation. qosReservationTimer = 8000 #This config is required to enable set the desired qos strength #for local and remote UEs. qosDesiredStrength = 1 #This config is required to enable 183 for Reneg qosMc183 = 0 #This config is required to configure if the UE must wait for #video dedicated bearer allocation during call setup. localQosResReqVideo = 1 #This config is required to configure if the UE must wait for #text dedicated bearer allocation during call setup. localQosResReqText = 1 #This config is required to enable/disable video CRBT feature VideoCRBT = 0 #This config is required to configure the early QoS timer for video dedicated #bearer allocation. earlyQosReservationTimer = 0 #This config is required to enable Qos precondition negotiation #in SDP. qosPreconditionsEnabled = 1 #This config is required to enable Qos MC precondition negotiation #in SDP. qosMcPreconditionsEnabled = 0 #This config is required to configure the MBR threshold. iMBRthresholdValue = 0 #This config is required to configure if the UE must wait for #audio dedicated bearer allocation during call setup. localQosResReqAudio = 1 #This config is required to configure if the initial SDP #directionality should be inactive in REINVITE when preconditions are #used reinviteSdpDirInactive = 0 #This config is required to enable MBR check for video bearer. qosMbrVideoCheckReqEnabled = 1 #This config is required to configure if the initial SDP #directionality should be inactive when preconditions are used. inviteSdpDirInactive = 0 #This config is required to enable MBR check for audio bearer. qosMbrAudioCheckReqEnabled = 0 #This config is required to enable QCI match with the requested media type for qos checkQciForQoSMediaType = 0 #This config is required to enable mid-call precondition for Call Hold/Resume qosMcHold = 0 [Ut:XCAPCommonHC] #This config item controls the configuration of BSF server address bsfServerAddress = ":10080" #This config item controls whether to ignore RSp Auth failure or not IgnoreRSPAuthFailure = 0 #This config item controls whether GBA_U is enabled or not useGBAMEOnly = 0 #This config item controls whether ims prefix is added or not for Ub request like as bsf.ims.mnc005.mcc232.pub.3gppnetwork.org includeIMSPrefixForUSIM = 0 #This config item controls whether BSF server supports TLS bsfServerTlsSupport = 0 [Registration:RegistrationFeatureFlags] #This config item specifies if the sub operator is APTG and special handling is required for Options unsubscribed error or not. 0:Not enabled(default), 1:enabled optionsUnsubscribedSpecialHandling = 0 #This config item controls whether need to reset AWT timer. notResetAWTTimerEnable = 0 #This config item controls whether IWLAN Config failure is to be handled as internal failure. specialhandlingForIWLANConfigFailure = 0 [QIPCALL:EVS_3] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:ImsVoiceSessionTimerConfig] #This config is required to configure the session refresher shall #be UAC/UAS. sessionRefresherType = QP_CONFIG_SES_REFRESHER_UAC #This config is required to enable session timer support. sessionTimerEnabled = 1 #This config is required to enable Stand Alone Session Expiry #negotiation. standAloneEnabled = 1 #This config is required to enable Sesssion Expiry timer #negotiation. allowSeNegotiation = 0 #This config is required to configure the method for session #referesh shall be REINVITE/UPDATE. sessionRefresherMethod = QP_CONFIG_SES_REFRESH_UPDATE [QIPCALL:ImsVoiceConfig] #This config is required to configure the Emergency call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network emergencyCallCancelTimer = 500 #This config is required to configure the default WPS invite duration. wpsInviteDuration = 0 #This config is required to enable 380 response validation as per #3GPP. enableAlternateSrvRspCheck = 1 #This config is required to set the display text priority #subscription. displayTextPriority = 3 #This config is required to include MTT USSD feature tag into IMS registration. ussdAcceptContact = "+g.3gpp.nw-init-ussi" #This config is required to configure the default invite retry counter. inviteRetryCounter = 2 #This config is required to select the default emergency URI if sub category matches with multiple entries e911SelectDefURI = 0 #This config is required to disable early media timer. disableEarlyMediaTimer = 0 #This config is required to configure the voice call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network voiceCallCancelTimer = 0 #This config is required to place AMR WB before AMR in encryption call. preferAMRWBinEncryptionCall = 0 #This config is required to enable PEM header in 183. enablePEMHeaderIn183 = 0 #This config is required to configure the default URI type #(SIP/TEL) for MO calls. uriType = QPE_IMS_URI_SIP #This config is required to configure the enabling of sending REINVITE #during Active calls HO. reInviteonHOforActiveCalls = 0 #This config is required to configure the terminating identity presentation or restriction type. terminatingIdentityService = 0 #This config is required to configure the default WPS fallback duration. wpsFallbackDuration = 0 #This config is required to configure the ignoring of AS value ignoreASValidation = 0 #This config is required to configure the max-red value max_red = 0 #This config is required to set error code for CT submode. sessionEndResponseTimeout = 0 #This config is required to enable VoWIFI Call Continuity to LTE NonVOPS. enableVCCtoLTENonVOPS = 0 #This config is required to enable emergency call operation in CS-only mode. emergCallCSOnly = 0 #This config is required to configure number format during roaming, geo-local/home-local phoneContextPolicy = QPE_IMS_PHONE_CONTEXT_GEO_LOCAL #This config is required to enable Call end on RTP inactivity. CallEndonRTPInactivity = 0 #This config is required to set the phone context domain source. PhoneContextSource = QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_MCC_MNC #This config is required to set preconditions enabled with qos events ignored. ignoreQOSEvents = 0 #This config is required to enable the MT USSI. enableMTUSSI = 1 #This config is required to configure the privacy type. Set 0: for none, 1: for id, 2: for header. privacyType = 2 [Registration:RegistrationDefaultParams] #This config item will be used to configure default UserName to register with Network userName = "" #This config item will be used to configure default authType to register with Network authType = "" #This config item will be used to configure default Display Name to register with Network displayName = "" #This config item will be used to configure default DomainName to register with Network domainName = "" #This config item will be used to configure default authSecertKey authSecertKey = "465b5ce8b199b49faa5f0a2ee238a6bc" #This config item will be used to configure default Private URI to register with Network privateURI = "" #This config item will be used to configure default is3GPP is3GPP = 0 #This config item will be used to configure default Realm to register with Network realm = "" #This config item will be used to configure default public URI to register with Network publicURI = "" #This config item will be used to configure default Password to register with Network password = "" [QIPCALL:ImsVoiceSuppsConfig] #This config is required to configure the timer for Notify #response to Refer. notifyReferRspTimer = 20 #This config is required to end the conference call automatically #when all other participants left the call. endConfCallUponNoParticipant = 1 #This config is required to enable presentation of the call to #the user when UE is already in two calls (active and held). *presentThirdCalltoUser = 1 #This config is required to configure the conference event #package subscription timer. confEvtSubTimer = 3600 #This config is required not to send unsubscribe to NW for conference call when there is #no notify-terminated received. isUnsubcribeDisabled = 0 #This config is required to configure the dialog for the #conference event subscribe request. *confEvtSubOutOfDialog = 0 #This config is required to configure the three party conf URI #for KDDI. threePartyConfFactoryUri = "" #This config is required to enable the conference event package #subscription. confEvtPakageEnabled = QPE_IMS_CONF_PCKG_ALL [QIPCALL:ImsRtcpXRConfig] #This config is required to enable RTCP-XR support. rtcpXrEnabled = 0 [SMSDAN:DANSettings] #This config item controls QIPCall 1x SMS and Voice Enabled (0:DAN SMS can be sent only if there is no voice call. #1:Enabled; DAN and MO SMS can be sent even when a voice call is up). smsAndVoiceOver1x = 0 #This NV item is used for configuring the transport channel preference on which DAN is to be sent. channelPreference = 0 #This config item controls the DAN Retry Timer Interval Duration (In ms) retryTimer = 0 #This config item controls the DAN Max Retry Counter maxRetryCount = 0 #This NV item is used for controlling DAN Hysterisis Timer Duration hysterisisTimer = 0 [QIPCALL:H263_0] #payload type number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationCounters] #This config item controls the Immediate Retry timer for failures maxPDNIntermediateRetries = 1 [QIPCALL:ImsVideoConfig] #This config is required to configure the LTR mode. ltrMode = QP_CONFIG_IMS_LTR_DISABLED #This config is required to configure if VT capability can be impacted by modile data. vtImpactedByMobileData = 1 #This config is required to set the video_capability_for_invite_no_sdp for #incoming INVITE without SDP. video_capability_for_invite_no_sdp = 1 #Internal:This config is required to store peer supported #services trackPeerServices = 0 [SIPConfig:Transport] #above this size choose TCP and value 0 means disable tcp port open on UE TCPThresholdValue = 1300 #enable or disable TCP Static threshold TCPEnableStaticThreshold = 0 [SIPConfig:StandardTimers] #sip registration expires value SipRegValue = 0 #sip reg subscription expires value SipSubscribeValue = 0 [SIPConfig:IPSec] #integrity scheme for ipsec sip messages IntScheme = 3 #encryption algo for ipsec sip messages EncAlgo = 7 [SMSDAN:SMSSettings] #This config item used to configure the error code and used while reject Incoming MT sms while NAS is busy in service one SMS. IncomingSmsRejectCode = 400 #This config item used to enable or disable feature of rejecting incoming SMS when IMS is already processing a SMS. EnableIncomingSmsRejectFeature = 0 #This config item controls the SMS Feature tag smsAcceptContact = "+g.3gpp.smsip" [MEDIA:MediaCommon] #This config item specifies if overall rate adaptation feature is enabled or not. audioRAEnable = 1 #This config item specifies maximum mtu size for the rtp packet mtuSize = 1400 [Registration:RegistrationSettings] #This config item controls Registration over IWLAN in airplane mode enableRegistrationInLPM = 2 #This config item controls PCSCF IP fallback feature pcscfBasedIPFallback = 0 #This config item controls TTY over IMS enableTTYOverIMS = 0 #This config item controls Reregistration over WIFI during Activate 3G call BlockRegOverWifiWhileActiveCSCall = 1 #This config item controls Reregistration over WIFI during Activate 1x call BlockRegOverWifiWhileActive1XCall = 0 [Ut:XcapHCConfigUserProfile] #This config item controls the configured user name configUserName = "" #This config item controls the configured user name configUserPassword = "" [DPL:Common] #This config item determines usage to read the SIM card parameters (ISIM, USIM ) etc #Possible INTEGER values for override are as follows: #QPE_CONFIG_IMS_FILE_READ = 0 --> File Read Param Source #QPE_CONFIG_IMS_NV_READ = 1 --> NV Read Param Source #QPE_CONFIG_IMS_CARD_READ = 2 --> Card Read Param Source to read from ISIM #QPE_CONFIG_IMS_FILE_READ_AUTH_ENABLED = 3 --> File Read Param Auth enabled (ONLY for testing) #QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED = 4 --> USIM fallback enabled ParamSrc = QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED [QIPCALL:ImsMediaProfileConfig] #This config is required to video codec profile list on 4G. VideoProfile1 = "H264_0" #This config is required to audio codec profile list. *AudioProfile1 = "EVS_1_126;EVS_3_127;AMR_1_104;AMR_0_102" [QIPCALL:ImsVoWifiConfig] #This config is required to configure the wifi connectivity #backoff timer. wifiConnectivityBackoffTimer = 10 #This config is required to configure the 380 handling for Emergency calls #Possible values are: #0 -> Default behaviour present in the code #1 -> Force CSFB #2 -> Send Permanent failure Handling380forEmergency = 0 [MEDIA:MediaDscp] #This config item specifies dscp value for audio audio = 46 #This config item specifies dscp value for video video = 46 [QIPCALL:ImsVideoModifyConfig] #This config is required to configure the timer in msecs for #waiting on user response to the incoming upgrade req. localUpgradeAcceptTimer = 20000 #This config is required to configure the timer in secs for #response from the peer to the sent upgrade req. remoteUpgradeRejectTimer = 40 [SIPConfig:CustomTimers] #reliable response retry timer cap TRelResponseRetry = 0 "

efs:/google (2)

efs:/google/paris_version = "g670_default_32_201910022029 "
efs:/google/fd_timers.conf = 85899345940x200000002

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -118; LTEDLRSRPThresholdTargetHigh = -104; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 3; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; HOAlgoTuningParam = 2; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -15; WCDMA_TRAT_ECIO_Threshold = -10; WCDMA_SRAT_RSCP_Threshold = -115; WCDMA_TRAT_RSCP_Threshold = -110; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -125; LTE_RSRP_Single_in = -118; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -170; LTE_SNR_Single_out = 75; LTE_SNR_Single_in = 85; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/data/wlan_config (1)

wlan_offload_configunverified = 2
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wlan_offload_config

efs:/nv/item_files/ims (24)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified = "Vodafone VOLTE Qualcomm"
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 1= Enabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 2
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item

efs:/nv/item_files/modem/data/3gpp/dsmgr (1)

emergency_apn_typeunverified = 1310730x20001
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/dsmgr/emergency_apn_type

efs:/nv/item_files/modem/data/3gpp/ps (1)

modem_def_prof_supportunverified = No value
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/modem_def_prof_support

efs:/nv/item_files/modem/geran/grr (2)

G2L blind redirect after CSFBlikely = 1
GSM->LTE blind redirection after a CSFB callefs:/nv/item_files/modem/geran/grr/g2l_blind_redir_after_csfb_control
g2l_blind_redir_after_srvcc_controlunverified = 0
GERAN setting: GSM/GPRS radio resourceefs:/nv/item_files/modem/geran/grr/g2l_blind_redir_after_srvcc_control

efs:/nv/item_files/modem/lte/rrc/cap (3)

fgiunverified = 21443355480x7fcff6bc
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi
fgi_rel9unverified = 32296140800xc0800000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi_rel9
fgi_r10unverified = 31457280x300000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi_r10

efs:/nv/item_files/modem/mmode (11)

lte_emerg_redialunverified = 657930x10101
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_emerg_redial
SMS onlylikely = 0= Off
Register for SMS onlyefs:/nv/item_files/modem/mmode/sms_only
UE usage settinglikely = 0= Voice centric
TS 24.301 UE usage settingefs:/nv/item_files/modem/mmode/ue_usage_setting
SMS domain preference = 0= PS SMS not allowed
SMS over IMS preferenceefs:/nv/item_files/modem/mmode/sms_domain_pref
SMS mandatorylikely = 0= Off
SMS is mandatory for the device (block LTE if IMS/SGs SMS registration fails)efs:/nv/item_files/modem/mmode/sms_mandatory
supplement_service_domain_prefunverified = 3
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/supplement_service_domain_pref
Voice domain preference = 3= IMS PS voice preferred
E-UTRAN voice domain (TS 24.301 9.9.3.44)efs:/nv/item_files/modem/mmode/voice_domain_pref
mid_call_srvcc_infounverified = 10995129077770x10000138801
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/mid_call_srvcc_info
wifi_configunverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/wifi_config
ue_based_cwunverified = 257
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/ue_based_cw
LTE band preferencelikely = ffffffffff7fffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref

efs:/nv/item_files/modem/nas (7)

EMM NAS itemslikely =
32-byte EMM configuration blobefs:/nv/item_files/modem/nas/emm_nas_nv_items
SRVCC support = 1= On
SRVCC capability indication from E-UTRAN to UTRAN (TS 23.216)efs:/nv/item_files/modem/nas/nas_srvcc_support
Ignore MT CSFB during VoLTE = 1= On
Ignore a mobile-terminated CSFB page while a VoLTE call is activeefs:/nv/item_files/modem/nas/lte_nas_ignore_mt_csfb_during_volte_call
nas_l2g_srvcc_supportunverified = 1
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/nas_l2g_srvcc_support
reg_nv_itemsunverified =
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/reg_nv_items
Max validate SIM counterlikely = 3
SIM validation retry limitefs:/nv/item_files/modem/nas/max_validate_sim_counter
t3245_timerunverified = 5
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/t3245_timer

efs:/nv/item_files/modem/sms (1)

efs:/nv/item_files/modem/sms/sms_retry_limit = 1

efs:/nv/item_files/wcdma/rrc (4)

wcdma_rrc_csfb_skip_sib11_optunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_csfb_skip_sib11_opt
Fast return to LTE after CSFBlikely = 1= On
Return from WCDMA to LTE right after a CSFB callefs:/nv/item_files/wcdma/rrc/wcdma_rrc_fast_return_to_lte_after_csfb
wcdma_rrc_fast_return_to_lte_after_csfb_timerunverified = 2000
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_fast_return_to_lte_after_csfb_timer
wcdma_rrc_dormancy_supportunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_dormancy_support

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

nv (22)

DTM Feature Supportlikely = 1
nv:3628
DARP Feature Supportlikely = 0
nv:4117
Bannerlikely = "VFNL_Volte"
nv:71
Network Selection Mode Preferencelikely = 0
nv:849
GSM/UMTS SMS Bearer Preferencelikely = 2
nv:909
NAS Release Compliancelikely = 3
nv:4722
Mode preference = 31= GWL
Digital/Analog Mode Preferencenv:10
Hybrid preference = 1= On
Hybrid CDMA 1x + HDR operationnv:562
GSM/UMTS Cell Broadcast SMS Carrier Configurationlikely = 1
nv:1016
GSM/UMTS Cell Broadcast SMS User Preferencelikely = 2
nv:1017
SMS MO Retry Periodlikely = 135
nv:3532
SMS MO Retry Intervallikely = 30
nv:3533
SMS MO On Access Channellikely = 0
nv:4228
SMS MP On Traffic Channellikely = 1
nv:4229
MGRF Supportedlikely = 1
nv:5895
UMTS AMR Codec Preference Configlikely = 15
nv:6850
Auto Redial Settinglikely
nv:75
Enable = 1
Rings = 1
RTRE Configurationlikely = 0
nv:855
Acquisition Order Preferencelikely = 0
nv:848
RRC Integrity Enabledlikely = 1
nv:880
RRC Ciphering Enabledlikely = 1
nv:881
RRC Fake Security Enabledlikely = 0
nv:882

Rogers_Canada in the Qualcomm modem firmware of SP1A.210812.016.C2.

Header
MCFG version0801481a
LabelRogers_Canada
Version1a480108
Base version1a480108
Capability14000000
DigestSt“z§æ©é]׶!zœì—Š—­¶õ/¼•»ç \
Trailer version0001
Selected by (2)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC302370any SIM
MCC-MNC302720any SIM
Settings (113)

efs:/data (6)

ds_dsd_attach_profile.txtunverified = "Attach_Profile_ID:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_dsd_attach_profile.txt
iwlan_s2b_config.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/iwlan_s2b_config.xml
ds_andsf_config.txtunverified = "andsf_rule_mgr_active:1; lte_meas_alpha:50; lte_sampling_interval:1000; lte_avg_interval:5000; wifi_meas_alpha:65; wifi_sampling_interval:1000; wifi_avg_interval:5000; cdma_1x_meas_alpha:50; cdma_1x_avg_interval:6000; cdma_1x_acq_hyst_interval:3000; cdma_1x_lost_hyst_interval:3000; cdma_1x_sampling_interval:2000;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_andsf_config.txt
Default ANDSFlikely =
ANDSF Wi-Fi/cellular steering policy (TS 24.312)efs:/data/default_andsf.xml
andsf.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/andsf.xml
ds_eps_kamgr_pdn.txtunverified = No value
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_eps_kamgr_pdn.txt

efs:/Data_Profiles (4)

efs:/Data_Profiles/Profile1 =
efs:/Data_Profiles/Profile2 =
efs:/Data_Profiles/Profile3 =
efs:/Data_Profiles/Profile4 =

efs:/efsprofiles (1)

efs:/efsprofiles/overideconfig = " [SIPConfig:GeoLocation] #enable or disable location info inclusion in regular calls iEnableCellInfoInPANI = 0 #enable or disable location info inclusion in regular calls iEnableLocInfoInNormalCall = 0 #enable or disable location info inclusion in emergency calls iEnableLocInfoInEmergencyCall = 1 [QIPCALL:H264_2] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 117 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 118 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_1] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 115 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 116 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_0] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 7 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 113 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 114 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 384 #Preffered bitrate bitrate_preferred = 384 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:EVS_0] #channel aware setting #b119147458, enable EVS. *ch_aw_recv = 0 #This config is used for hf only hf_only = 0 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, *Bandwidth = 5 #This config is used for bit rate. It has to be in DECIMAL format. *BitRate = 127 [QIPCALL:EVS_1] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. BitRate = 120 [QIPCALL:EVS_2] #channel aware setting ch_aw_recv = -1 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:EVS_3] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:H265_2] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationTimers] #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for SSIM device wlanGaurdTimer = 7 #This config item controls the Register configuration for the network-initiated De reg Timer value. networkInitiatedDeRegistrationTimer = 0 #This config item controls the Retry timer for permanent PDP failures pdnRetryLongTimer = 5 #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for MSIM device wlanGaurdTimerMSIM = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for SSIM device wwanGaurdTimer = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for MSIM device wwanGaurdTimerMSIM = 10 #This config item controls the Retry timer for temporary failures pdnRetryShortTimer = 60 [QIPCALL:H265_0] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [QIPCALL:H265_1] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Ut:UtConfiguration] #This config item controls the media element type for Call Barring Service. 0:No media tag support, 1:One media tag per media type, 2: include both audio and video tags mediaElementSupportForCB = 0 #This config item specifies if the realm is to trimmed or not. 0:Not enabled(default), 1:enabled isTrimRealmEnabled = 0 #This config item specifies if IR92v10 is enabled or not. 0:Not enabled(default), 1:enabled isIr92V10Enabled = 1 #This config item controls the time for which the PDN needs to be kept Active after a SS request is completed pdnHysTimerValue = 0 #This config item controls the Maximum time within which a Response should be sent to UI maxResponseTimerValue = 0 #This config item controls the action item when there is no SIB value for CB request. 0:Default, 1:Reject, 2:Audio Only, 3:Both Audio and Video emptySIBUsageForCB = 0 #This config item controls the action item. When a rule id is not present in a server xml, a request is not allowed. It is used on VDF-Portugal only now. 0:Not to check a rule ID(Default), 1:Block a request when rule ID is not present in a server xml blockIfRuleIDAbsent = 0 [SIPConfig:FeatureFlags] #enable or disable sip instance inclusion in contact header IsSipInstanceNeeded = 0 #enable or disable Cellular-Network-Info header IsCNIEnabled = 1 #enable or disable header compact form IsCompactFormEnabled = 0 #enable or disable IsUIReadyStatusCheckNeeded IsUIReadyStatusCheckNeeded = 0 #disable StopTimerBon1xx once 1xx response is not received StopTimerBon1xx = 0 #enable or disable IsImsiNeededForContactHeader IsImsiNeededForContactHeader = 0 [QIPCALL:ImsVoiceSrvccConfig] #This config is required to enable bSRVCC. bSrvccEnabled = 1 #This config is required to enable aSRVCC. aSrvccEnabled = 1 #b141279660:Disable mSRVCC #This config is required to enable mid call SRVCC. *midcallSrvccEnabled = 0 [QIPCALL:ImsRtcpConfig] #This config is required to configure the RR bandwidth for Video. rrForVideo = 2000 #This config is required to configure the timer for RTCP #monitoring. rtcpLinkAlivenessTimer = 20 #This config is required to configure the RS bandwidth for Audio. rsForAudio = 600 #This config is required to disbale/enable the RTCP monitoring. disableRTCPMonitoring = 0 #This config is required to configure the timer for RTCP #Reporting in VT call. rtcpReportingIntervalInVideo = 1 #This config is required to configure the RS bandwidth for Video. rsForVideo = 600 #This config is required to configure the RR bandwidth for Audio. rrForAudio = 2000 [QIPCALL:AMR_4] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:G711_2] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMA [QIPCALL:G711_1] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:G711_0] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:AMR_0] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_1] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_2] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:AMR_3] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:ImsVoiceQoSConfig] #This config is required to enable sending SDP answer in PRACK #for 183 if the local qos is granted before 183 response is recvd by #the UE. qosOptimization = 0 #This config is required to configure the timer for dedicated #bearer allocation. qosReservationTimer = 10000 #This config is required to enable set the desired qos strength #for local and remote UEs. qosDesiredStrength = 1 #This config is required to enable 183 for Reneg qosMc183 = 0 #This config is required to configure if the UE must wait for #video dedicated bearer allocation during call setup. localQosResReqVideo = 1 #This config is required to configure if the UE must wait for #text dedicated bearer allocation during call setup. localQosResReqText = 1 #This config is required to configure the early QoS timer for video dedicated #bearer allocation. earlyQosReservationTimer = 0 #This config is required to enable Qos precondition negotiation #in SDP. qosPreconditionsEnabled = 1 #This config is required to enable Qos MC precondition negotiation #in SDP. qosMcPreconditionsEnabled = 0 #This config is required to configure the MBR threshold. iMBRthresholdValue = 0 #This config is required to configure if the UE must wait for #audio dedicated bearer allocation during call setup. localQosResReqAudio = 1 #This config is required to configure if the initial SDP #directionality should be inactive in REINVITE when preconditions are #used reinviteSdpDirInactive = 0 #This config is required to enable MBR check for video bearer. qosMbrVideoCheckReqEnabled = 1 #This config is required to configure if the initial SDP #directionality should be inactive when preconditions are used. inviteSdpDirInactive = 0 #This config is required to enable MBR check for audio bearer. qosMbrAudioCheckReqEnabled = 0 #This config is required to enable mid-call precondition for Call Hold/Resume qosMcHold = 0 [Ut:XCAPCommonHC] #This config item controls the configuration of BSF server address *bsfServerAddress = "" #This config item controls whether GBA_U is enabled or not useGBAMEOnly = 0 #This config item controls whether ims prefix is added or not for Ub request like as bsf.ims.mnc005.mcc232.pub.3gppnetwork.org includeIMSPrefixForUSIM = 0 #This config item controls whether BSF server supports TLS bsfServerTlsSupport = 0 [Registration:RegistrationFeatureFlags] #This config item specifies if the sub operator is APTG and special handling is required for Options unsubscribed error or not. 0:Not enabled(default), 1:enabled optionsUnsubscribedSpecialHandling = 0 [QIPCALL:ImsVoiceSessionTimerConfig] #This config is required to configure the session refresher shall #be UAC/UAS. sessionRefresherType = QP_CONFIG_SES_REFRESHER_UAC #This config is required to enable session timer support. sessionTimerEnabled = 1 #This config is required to enable Stand Alone Session Expiry #negotiation. standAloneEnabled = 1 #This config is required to enable Sesssion Expiry timer #negotiation. allowSeNegotiation = 0 #This config is required to configure the method for session #referesh shall be REINVITE/UPDATE. sessionRefresherMethod = QP_CONFIG_SES_REFRESH_UPDATE [QIPCALL:ImsVoiceConfig] #This config is required to configure the Emergency call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network emergencyCallCancelTimer = 30000 #This config is required to configure the default WPS invite duration. wpsInviteDuration = 0 #This config is required to enable 380 response validation as per #3GPP. enableAlternateSrvRspCheck = 1 #This config is required to set the display text priority #subscription. displayTextPriority = 2 #This config is required to include MTT USSD feature tag into IMS registration. ussdAcceptContact = "+g.3gpp.nw-init-ussi" #This config is required to configure the default invite retry counter. inviteRetryCounter = 2 #This config is required to select the default emergency URI if sub category matches with multiple entries e911SelectDefURI = 0 #This config is required to disable early media timer. disableEarlyMediaTimer = 0 #This config is required to configure the voice call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network voiceCallCancelTimer = 30000 #This config is required to enable PEM header in 183. enablePEMHeaderIn183 = 0 #This config is required to configure the default URI type #(SIP/TEL) for MO calls. uriType = QPE_IMS_URI_SIP #This config is required to configure the terminating identity presentation or restriction type. #b/112984937 to set to 0 *terminatingIdentityService = 0 #This config is required to configure the default WPS fallback duration. wpsFallbackDuration = 0 #This config is required to configure the ignoring of AS value ignoreASValidation = 0 #This config is required to set error code for CT submode. sessionEndResponseTimeout = 0 #This config is required to enable VoWIFI Call Continuity to LTE NonVOPS. enableVCCtoLTENonVOPS = 0 #This config is required to enable emergency call operation in CS-only mode. emergCallCSOnly = 0 #This config is required to configure number format during roaming, geo-local/home-local phoneContextPolicy = QPE_IMS_PHONE_CONTEXT_GEO_LOCAL #This config is required to set the phone context domain source. PhoneContextSource = QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_PAU_HEADER #This config is required to set preconditions enabled with qos events ignored. ignoreQOSEvents = 0 #This config is required to enable the MT USSI. enableMTUSSI = 1 #This config is required to configure the privacy type. Set 0: for none, 1: for id, 2: for header. privacyType = 2 [Registration:RegistrationDefaultParams] #This config item will be used to configure default UserName to register with Network userName = "" #This config item will be used to configure default authType to register with Network authType = "" #This config item will be used to configure default Display Name to register with Network displayName = "" #This config item will be used to configure default DomainName to register with Network domainName = "" #This config item will be used to configure default authSecertKey authSecertKey = "465b5ce8b199b49faa5f0a2ee238a6bc" #This config item will be used to configure default Private URI to register with Network privateURI = "" #This config item will be used to configure default is3GPP is3GPP = 0 #This config item will be used to configure default Realm to register with Network realm = "" #This config item will be used to configure default public URI to register with Network publicURI = "" #This config item will be used to configure default Password to register with Network password = "" [QIPCALL:ImsVoiceSuppsConfig] #This config is required to configure the timer for Notify #response to Refer. notifyReferRspTimer = 20 #This config is required to end the conference call automatically #when all other participants left the call. endConfCallUponNoParticipant = 1 #This config is required to enable presentation of the call to #the user when UE is already in two calls (active and held). *presentThirdCalltoUser = 1 #This config is required to configure the conference event #package subscription timer. confEvtSubTimer = 3600 #This config is required to configure the dialog for the #conference event subscribe request. #sync from S2, which fix con call UL no sound issue *confEvtSubOutOfDialog = 0 #This config is required to configure the three party conf URI #for KDDI. threePartyConfFactoryUri = "" #This config is required to enable the conference event package #subscription. confEvtPakageEnabled = QPE_IMS_CONF_PCKG_ALL [QIPCALL:ImsRtcpXRConfig] #This config is required to enable RTCP-XR support. rtcpXrEnabled = 0 [SMSDAN:DANSettings] #This config item controls QIPCall 1x SMS and Voice Enabled (0:DAN SMS can be sent only if there is no voice call. #1:Enabled; DAN and MO SMS can be sent even when a voice call is up). smsAndVoiceOver1x = 1 #This NV item is used for configuring the transport channel preference on which DAN is to be sent. channelPreference = 0 #This config item controls the DAN Retry Timer Interval Duration (In ms) retryTimer = 0 #This config item controls the DAN Max Retry Counter maxRetryCount = 3 #This NV item is used for controlling DAN Hysterisis Timer Duration hysterisisTimer = 45000 [QIPCALL:H263_0] #payload type number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationCounters] #This config item controls the Immediate Retry timer for failures maxPDNIntermediateRetries = 1 #This config item controls the number of retries on Authentication failure. Currently used for Rogers #Modify per case#03006712, b/63177238 *maxPDNRetriesOnIwlanAuthFailure = 2 [QIPCALL:ImsVideoConfig] #This config is required to configure the LTR mode. ltrMode = QP_CONFIG_IMS_LTR_ENABLED_RESTRICT_QC #This config is required to set the video_capability_for_invite_no_sdp for #incoming INVITE without SDP. video_capability_for_invite_no_sdp = 1 #Internal:This config is required to store peer supported #services trackPeerServices = 0 [SIPConfig:Transport] #above this size choose TCP and value 0 means disable tcp port open on UE TCPThresholdValue = 1500 #enable or disable TCP Static threshold TCPEnableStaticThreshold = 0 [SIPConfig:StandardTimers] #sip registration expires value SipRegValue = 0 #sip reg subscription expires value SipSubscribeValue = 0 [SIPConfig:IPSec] #integrity scheme for ipsec sip messages IntScheme = 3 #encryption algo for ipsec sip messages EncAlgo = 7 [SMSDAN:SMSSettings] #This config item controls the SMS Feature tag smsAcceptContact = "+g.3gpp.smsip" [MEDIA:MediaCommon] #This config item specifies if overall rate adaptation feature is enabled or not. audioRAEnable = 1 #This config item specifies maximum mtu size for the rtp packet mtuSize = 1400 [Registration:RegistrationSettings] #This config item controls Registration over IWLAN in airplane mode enableRegistrationInLPM = 2 #This config item controls PCSCF IP fallback feature pcscfBasedIPFallback = 0 #This config item controls TTY over IMS enableTTYOverIMS = 0 #This config item controls Reregistration over WIFI during Activate 3G call BlockRegOverWifiWhileActiveCSCall = 1 #This config item controls Reregistration over WIFI during Activate 1x call BlockRegOverWifiWhileActive1XCall = 0 [Ut:XcapHCConfigUserProfile] #This config item controls the configured user name configUserName = "" #This config item controls the configured user name configUserPassword = "" [DPL:Common] #This config item determines usage to read the SIM card parameters (ISIM, USIM ) etc #Possible INTEGER values for override are as follows: #QPE_CONFIG_IMS_FILE_READ = 0 --> File Read Param Source #QPE_CONFIG_IMS_NV_READ = 1 --> NV Read Param Source #QPE_CONFIG_IMS_CARD_READ = 2 --> Card Read Param Source to read from ISIM #QPE_CONFIG_IMS_FILE_READ_AUTH_ENABLED = 3 --> File Read Param Auth enabled (ONLY for testing) #QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED = 4 --> USIM fallback enabled ParamSrc = QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED [QIPCALL:ImsMediaProfileConfig] #This config is required to video codec profile list on 4G. VideoProfile1 = "H264_0" #This config is required to audio codec profile list. *AudioProfile1 = "EVS_0_126;AMR_1_104;AMR_0_102" [QIPCALL:ImsVoWifiConfig] #This config is required to configure the wifi connectivity #backoff timer. wifiConnectivityBackoffTimer = 10 [MEDIA:MediaDscp] #This config item specifies dscp value for audio audio = 46 #This config item specifies dscp value for video video = 46 [QIPCALL:ImsVideoModifyConfig] #This config is required to configure the timer in msecs for #waiting on user response to the incoming upgrade req. localUpgradeAcceptTimer = 20000 #This config is required to configure the timer in secs for #response from the peer to the sent upgrade req. remoteUpgradeRejectTimer = 40 [SIPConfig:CustomTimers] #reliable response retry timer cap TRelResponseRetry = 0 "

efs:/google (5)

efs:/google/paris_version = "g670_default_32_201910022029 "
efs:/google/cust_ims_ua_enable = 1
efs:/google/user_agent_template = "Rogers [MI__ap] [SW__ap]"
efs:/google/cust_modem_features = 991
efs:/google/fd_timers.conf = 128849018910x300000003

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -121; LTEDLRSRPThresholdTargetHigh = -118; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 3; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -15; WCDMA_TRAT_ECIO_Threshold = -10; WCDMA_SRAT_RSCP_Threshold = -115; WCDMA_TRAT_RSCP_Threshold = -110; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -125; LTE_RSRP_Single_in = -118; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -170; LTE_SNR_Single_out = 75; LTE_SNR_Single_in = 85; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/data/3gpp/lteps (1)

carrier_aggregation_display_thresholdunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/3gpp/lteps/carrier_aggregation_display_threshold

efs:/nv/item_files/data/wlan_config (1)

wlan_offload_configunverified = 2
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wlan_offload_config

efs:/nv/item_files/gps/cgps/sm (2)

gnss_lpp_enableunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lpp_enable
gnss_lppe_cp_configunverified = 19
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lppe_cp_config

efs:/nv/item_files/ims (24)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 1= Enabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 2
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item

efs:/nv/item_files/modem/data/3gpp/dsmgr (1)

emergency_apn_typeunverified = 1310730x20001
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/dsmgr/emergency_apn_type

efs:/nv/item_files/modem/data/3gpp/ps (1)

modem_def_prof_supportunverified = No value
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/modem_def_prof_support

efs:/nv/item_files/modem/data/dsmgr (1)

wlan_3g_ip_continuity_enabledunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/dsmgr/wlan_3g_ip_continuity_enabled

efs:/nv/item_files/modem/geran/grr (3)

g2l_blind_redir_controlunverified = 0
GERAN setting: GSM/GPRS radio resourceefs:/nv/item_files/modem/geran/grr/g2l_blind_redir_control
G2L blind redirect after CSFBlikely = 0
GSM->LTE blind redirection after a CSFB callefs:/nv/item_files/modem/geran/grr/g2l_blind_redir_after_csfb_control
g2l_blind_redir_after_srvcc_controlunverified = 0
GERAN setting: GSM/GPRS radio resourceefs:/nv/item_files/modem/geran/grr/g2l_blind_redir_after_srvcc_control

efs:/nv/item_files/modem/lte/rrc (1)

embms_on_scc_cfg_maskunverified = 0
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/embms_on_scc_cfg_mask

efs:/nv/item_files/modem/lte/rrc/cap (6)

diff_fdd_tdd_fgi_enableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/diff_fdd_tdd_fgi_enable
fgiunverified = 21443375980x7fcffebe
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi
fgi_rel9unverified = 32212254720xc0000000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi_rel9
fgi_r10unverified = 10761011200x40240000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi_r10
mdt_r10_feature_disableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/mdt_r10_feature_disable
lte_feature_disableunverified =
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/lte_feature_disable

efs:/nv/item_files/modem/mmode (14)

LTE disable durationlikely = 12
How long LTE stays disabled when CS services are unavailableefs:/nv/item_files/modem/mmode/lte_disable_duration
SMS domain preference = 1= PS (IMS) SMS preferred
SMS over IMS preferenceefs:/nv/item_files/modem/mmode/sms_domain_pref
SMS mandatorylikely = 1= On
SMS is mandatory for the device (block LTE if IMS/SGs SMS registration fails)efs:/nv/item_files/modem/mmode/sms_mandatory
Voice domain preference = 3= IMS PS voice preferred
E-UTRAN voice domain (TS 24.301 9.9.3.44)efs:/nv/item_files/modem/mmode/voice_domain_pref
ue_based_cwunverified = 257
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/ue_based_cw
custom_emerg_infounverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/custom_emerg_info
mid_call_srvcc_infounverified = 10995129077770x10000138801
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/mid_call_srvcc_info
get_net_auto_modeunverified
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/get_net_auto_mode
Version = 0
Value = 1
Reserved = 0
lte_emerg_redialunverified = 657930x10101
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_emerg_redial
supplement_service_domain_prefunverified = 3
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/supplement_service_domain_pref
wifi_configunverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/wifi_config
LTE band preferencelikely = ffffffffff7dffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref
UE usage settinglikely = 0= Voice centric
TS 24.301 UE usage settingefs:/nv/item_files/modem/mmode/ue_usage_setting
lte_bandpref_extn_65_256unverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_bandpref_extn_65_256

efs:/nv/item_files/modem/nas (1)

Ignore MT CSFB during VoLTE = 1= On
Ignore a mobile-terminated CSFB page while a VoLTE call is activeefs:/nv/item_files/modem/nas/lte_nas_ignore_mt_csfb_during_volte_call

efs:/nv/item_files/modem/sms (1)

Refresh vote OKlikely = 1= On
Vote TRUE for SIM REFRESHefs:/nv/item_files/modem/sms/mmgsdi_refresh_vote_ok

efs:/nv/item_files/wcdma/rrc (7)

WCDMA RRC featurelikely = 5
WCDMA RRC feature maskefs:/nv/item_files/wcdma/rrc/wcdma_rrc_feature
wcdma_rrc_csfb_skip_sib11_optunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_csfb_skip_sib11_opt
Fast return to LTE after CSFBlikely = 1= On
Return from WCDMA to LTE right after a CSFB callefs:/nv/item_files/wcdma/rrc/wcdma_rrc_fast_return_to_lte_after_csfb
wcdma_rrc_fast_return_to_lte_after_csfb_timerunverified = 208
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_fast_return_to_lte_after_csfb_timer
wcdma_rrc_wtol_cm_supportunverified = 0
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_wtol_cm_support
wcdma_rrc_disable_cpc_fdpchunverified = 0
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_disable_cpc_fdpch
wcdma_rrc_dormancy_supportunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_dormancy_support

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

efs:/sd (1)

efs:/sd/rat_acq_order =

nv (30)

Bannerlikely = "ROGERS_CA"
nv:71
RTRE Configurationlikely = 0
nv:855
Acquisition Order Preferencelikely = 0
nv:848
Network Selection Mode Preferencelikely = 0
nv:849
GSM/UMTS SMS Bearer Preferencelikely = 2
nv:909
GSM/UMTS Cell Broadcast SMS Carrier Configurationlikely = 1
nv:1016
GSM/UMTS Cell Broadcast SMS User Preferencelikely = 2
nv:1017
MS SMS Max Number Of SMSlikely = 23
nv:3006
SMS MO Retry Periodlikely = 180
nv:3532
SMS MO Retry Intervallikely = 45
nv:3533
UMTS AMR Codec Preference Configlikely = 15
nv:6850
NAS Release Compliancelikely = 3
nv:4722
Mode preference = 4= Automatic
Digital/Analog Mode Preferencenv:10
Hybrid preference = 1= On
Hybrid CDMA 1x + HDR operationnv:562
CS TO VOIP Fallback Timerlikely = 10
nv:6830
VOIP Cancel Retry Timerlikely = 10
nv:6831
AAGPS Default QoS Timelikely = 64
nv:1918
AAGPS Positioning Modes Supportedlikely = 65407
nv:1920
RRC Integrity Enabledlikely = 1
nv:880
RRC Ciphering Enabledlikely = 1
nv:881
RRC Fake Security Enabledlikely = 0
nv:882
GPRS Multi Slot Classlikely = 33
nv:911
Anite GCF = 0= Off
GPRS Enable Anite GCF 51.010nv:947
EDGE Multislot Classlikely = 33
nv:2509
DTM Feature Supportlikely = 0
nv:3628
EDTM Feature Supportlikely = 0
nv:4209
GPRS GEA Algorithms Supportedlikely = 7
nv:4432
MGRF Supportedlikely = 1
nv:5895
ENHANCED HPLMN SRCH TBLlikely =
nv:6844
HSDPA Categorylikely = 24
3GPP HSDPA UE categorynv:4118

TestSIM in the Qualcomm modem firmware of SP1A.210812.016.C2.

Header
MCFG version0801ff01
LabelTestSIM
Version01ff0108
Base versionfffe0108
Capability04000000
DigestÕ$ï:€­nì”{¹Àܑàß½BÁ”P(d2)”ûçwmF
Trailer version0001
Selected by (1)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC00101any SIM
Settings (40)

efs:/google (1)

efs:/google/paris_version = "g670_default_32_201910022029 "

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -118; LTEDLRSRPThresholdTargetHigh = -115; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 3; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -15; WCDMA_TRAT_ECIO_Threshold = -10; WCDMA_SRAT_RSCP_Threshold = -115; WCDMA_TRAT_RSCP_Threshold = -110; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -125; LTE_RSRP_Single_in = -118; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -170; LTE_SNR_Single_out = 75; LTE_SNR_Single_in = 85; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/gps/cgps/sm (3)

gnss_lpp_enableunverified = 3
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lpp_enable
gnss_lppe_up_configunverified = 19
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lppe_up_config
gnss_lppe_cp_configunverified = 19
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lppe_cp_config

efs:/nv/item_files/ims (24)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 1= Enabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 2
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item

efs:/nv/item_files/modem/lte/rrc/cap (2)

lte_feature_disableunverified =
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/lte_feature_disable
disable_non_advertised_ca_combo_checkunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/disable_non_advertised_ca_combo_check

efs:/nv/item_files/modem/mmode (1)

LTE band preferencelikely = ffffffffff7fffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

efs:/SUPL (5)

efs:/SUPL/SpirentSuplCertificate512 =
efs:/SUPL/SpirentSuplCertificate2048 =
efs:/SUPL/RSSuplCertificate512 =
efs:/SUPL/RSSuplCertificate1024 =
efs:/SUPL/RSSuplCertificate2048 =

nv (2)

CGPS Minimum GPS Week Numberlikely = 1054
nv:6264
Bannerlikely = "TestSIM"
nv:71

VoLTE_Videotron in the Qualcomm modem firmware of SP1A.210812.016.C2.

Header
MCFG version08015019
LabelVoLTE_Videotron
Version19500108
Base version18500108
Capability04000000
Digest'ÜyQ:ˆ*‚9÷0ë« UtZDz3Ð …#¶„ÓŸ
Trailer version0001
Selected by (3)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC302500any SIM
MCC-MNC302510any SIM
MCC-MNC302520any SIM
Settings (131)

efs:/data (9)

ds_dsd_attach_profile.txtunverified = "Attach_Profile_ID:1;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_dsd_attach_profile.txt
Default ANDSFlikely =
ANDSF Wi-Fi/cellular steering policy (TS 24.312)efs:/data/default_andsf.xml
andsf.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/andsf.xml
ds_andsf_config.txtunverified = "andsf_rule_mgr_active:1; lte_meas_alpha:50; lte_sampling_interval:1000; lte_avg_interval:5000; wifi_meas_alpha:65; wifi_sampling_interval:1000; wifi_avg_interval:5000; cdma_1x_meas_alpha:50; cdma_1x_avg_interval:6000; cdma_1x_acq_hyst_interval:3000; cdma_1x_lost_hyst_interval:3000; cdma_1x_sampling_interval:2000; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_andsf_config.txt
threshold1.txtunverified = "rssi_high:-65; is_rssi_high_valid:1; rssi_low:-65; is_rssi_low_valid:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/threshold1.txt
threshold2.txtunverified = "rssi_high:-85; is_rssi_high_valid:1; rssi_low:-85; is_rssi_low_valid:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/threshold2.txt
threshold3.txtunverified = "rssi_high:-79; is_rssi_high_valid:1; rssi_low:-79; is_rssi_low_valid:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/threshold3.txt
threshold4.txtunverified = "rssi_high:-75; is_rssi_high_valid:1; rssi_low:-75; is_rssi_low_valid:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/threshold4.txt
ds_eps_kamgr_pdn.txtunverified = No value
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_eps_kamgr_pdn.txt

efs:/Data_Profiles (4)

efs:/Data_Profiles/Profile1 =
efs:/Data_Profiles/Profile2 =
efs:/Data_Profiles/Profile3 =
efs:/Data_Profiles/Profile4 =

efs:/data/3gpp/throttling (1)

srv_req_throt_config.txtunverified = "FAILURE_TIMER_5:20;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/3gpp/throttling/srv_req_throt_config.txt

efs:/efsprofiles (1)

efs:/efsprofiles/overideconfig = " [SIPConfig:GeoLocation] #enable or disable location info inclusion in regular calls iEnableCellInfoInPANI = 0 #enable or disable location info inclusion in regular calls iEnableLocInfoInNormalCall = 0 #enable or disable location info inclusion in emergency calls iEnableLocInfoInEmergencyCall = 1 #to set the threshold for uncertainty validation fUnCertaintyThreshold = 0.0 [QIPCALL:H264_2] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 117 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 118 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_1] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 115 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 116 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_0] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 7 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 113 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 114 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 384 #Preffered bitrate bitrate_preferred = 384 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:EVS_0] #channel aware setting ch_aw_recv = -1 #This config is used for hf only hf_only = 0 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. It has to be in DECIMAL format. BitRate = 120 [QIPCALL:EVS_1] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. BitRate = 120 [QIPCALL:EVS_2] #channel aware setting ch_aw_recv = -1 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [SMSDAN:USSDSettings] #This config item controls the Language String to be used. ussdLangString = "" [QIPCALL:H265_2] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationTimers] #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for SSIM device wlanGaurdTimer = 7 #This config item controls the Register configuration for the network-initiated De reg Timer value. networkInitiatedDeRegistrationTimer = 0 #This config item controls the Retry timer for permanent PDP failures pdnRetryLongTimer = 10 #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for MSIM device wlanGaurdTimerMSIM = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for SSIM device wwanGaurdTimer = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for MSIM device wwanGaurdTimerMSIM = 10 #This config item controls the Retry timer for temporary failures pdnRetryShortTimer = 60 [QIPCALL:H265_0] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [QIPCALL:H265_1] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Ut:UtConfiguration] #This config is required to configure the server responses for which UT is to be blocked permanently BlockUtResponseCodes = "" #This config item controls the media element type for Call Barring Service. 0:No media tag support, 1:One media tag per media type, 2: include both audio and video tags mediaElementSupportForCB = 0 #This config item specifies if the realm is to trimmed or not. 0:Not enabled(default), 1:enabled isTrimRealmEnabled = 0 #This config item specifies if IR92v10 is enabled or not. 0:Not enabled(default), 1:enabled isIr92V10Enabled = 0 #This config item controls the time for which the PDN needs to be kept Active after a SS request is completed pdnHysTimerValue = 0 #This config item controls the Maximum time within which a Response should be sent to UI maxResponseTimerValue = 0 #This config item controls the action item when there is no SIB value for CB request. 0:Default, 1:Reject, 2:Audio Only, 3:Both Audio and Video emptySIBUsageForCB = 0 #This config item controls the action item. When a rule id is not present in a server xml, a request is not allowed. It is used on VDF-Portugal only now. 0:Not to check a rule ID(Default), 1:Block a request when rule ID is not present in a server xml blockIfRuleIDAbsent = 0 [SIPConfig:FeatureFlags] #enable or disable sip instance inclusion in contact header IsSipInstanceNeeded = 0 #enable or disable Cellular-Network-Info header IsCNIEnabled = 1 #enable or disable header compact form IsCompactFormEnabled = 0 #enable or disable IsUIReadyStatusCheckNeeded IsUIReadyStatusCheckNeeded = 0 #disable StopTimerBon1xx once 1xx response is not received StopTimerBon1xx = 0 #enable or disable IsImsiNeededForContactHeader IsImsiNeededForContactHeader = 0 [QIPCALL:ImsVoiceSrvccConfig] #This config is required to enable bSRVCC. bSrvccEnabled = 1 #This config is required to enable aSRVCC. aSrvccEnabled = 1 #This config is required to enable mid call SRVCC. midcallSrvccEnabled = 1 [QIPCALL:ImsRtcpConfig] #This config is required to configure the RR bandwidth for Video. rrForVideo = 2000 #This config is required to configure the timer for RTCP #monitoring. rtcpLinkAlivenessTimer = 20 #This config is required to configure the RS bandwidth for Audio. rsForAudio = 600 #This config is required to disbale/enable the RTCP monitoring. disableRTCPMonitoring = 0 #This config is required to configure the timer for RTCP #Reporting in VT call. rtcpReportingIntervalInVideo = 1 #This config is required to configure the RS bandwidth for Video. rsForVideo = 600 #This config is required to configure the RR bandwidth for Audio. rrForAudio = 2000 [QIPCALL:AMR_4] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA *Mode = 1 [QIPCALL:G711_2] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMA [QIPCALL:G711_1] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:G711_0] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:AMR_0] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_1] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_2] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA *Mode = 1 [QIPCALL:AMR_3] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:ImsVoiceQoSConfig] #This config is required to enable sending SDP answer in PRACK #for 183 if the local qos is granted before 183 response is recvd by #the UE. qosOptimization = 0 #This config is required to configure the timer for dedicated #bearer allocation. qosReservationTimer = 8000 #This config is required to enable set the desired qos strength #for local and remote UEs. qosDesiredStrength = 1 #This config is required to enable 183 for Reneg qosMc183 = 0 #This config is required to configure if the UE must wait for #video dedicated bearer allocation during call setup. localQosResReqVideo = 1 #This config is required to configure if the UE must wait for #text dedicated bearer allocation during call setup. localQosResReqText = 1 #This config is required to enable/disable video CRBT feature VideoCRBT = 0 #This config is required to configure the early QoS timer for video dedicated #bearer allocation. earlyQosReservationTimer = 0 #This config is required to enable Qos precondition negotiation #in SDP. qosPreconditionsEnabled = 1 #This config is required to enable Qos MC precondition negotiation #in SDP. qosMcPreconditionsEnabled = 0 #This config is required to configure the MBR threshold. iMBRthresholdValue = 0 #This config is required to configure if the UE must wait for #audio dedicated bearer allocation during call setup. localQosResReqAudio = 1 #This config is required to configure if the initial SDP #directionality should be inactive in REINVITE when preconditions are #used reinviteSdpDirInactive = 0 #This config is required to enable MBR check for video bearer. qosMbrVideoCheckReqEnabled = 1 #This config is required to configure if the initial SDP #directionality should be inactive when preconditions are used. inviteSdpDirInactive = 0 #This config is required to enable MBR check for audio bearer. qosMbrAudioCheckReqEnabled = 0 #This config is required to enable QCI match with the requested media type for qos checkQciForQoSMediaType = 0 #This config is required to enable mid-call precondition for Call Hold/Resume qosMcHold = 0 [Ut:XCAPCommonHC] #This config item controls the configuration of BSF server address *bsfServerAddress = ":8080" #This config item controls whether GBA_U is enabled or not *useGBAMEOnly = 1 #This config item controls whether ims prefix is added or not for Ub request like as bsf.ims.mnc005.mcc232.pub.3gppnetwork.org includeIMSPrefixForUSIM = 0 #This config item controls whether BSF server supports TLS bsfServerTlsSupport = 0 [Registration:RegistrationFeatureFlags] #This config item specifies if the sub operator is APTG and special handling is required for Options unsubscribed error or not. 0:Not enabled(default), 1:enabled optionsUnsubscribedSpecialHandling = 0 #This config item controls whether need to reset AWT timer. notResetAWTTimerEnable = 0 [QIPCALL:EVS_3] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:ImsVoiceSessionTimerConfig] #This config is required to configure the session refresher shall #be UAC/UAS. sessionRefresherType = QP_CONFIG_SES_REFRESHER_UAC #This config is required to enable session timer support. sessionTimerEnabled = 1 #This config is required to enable Stand Alone Session Expiry #negotiation. standAloneEnabled = 1 #This config is required to enable Sesssion Expiry timer #negotiation. allowSeNegotiation = 0 #This config is required to configure the method for session #referesh shall be REINVITE/UPDATE. sessionRefresherMethod = QP_CONFIG_SES_REFRESH_UPDATE [QIPCALL:ImsVoiceConfig] #This config is required to configure the Emergency call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network emergencyCallCancelTimer = 500 #This config is required to configure the default WPS invite duration. wpsInviteDuration = 0 #This config is required to enable 380 response validation as per #3GPP. enableAlternateSrvRspCheck = 1 #This config is required to set the display text priority #subscription. displayTextPriority = 3 #This config is required to include MTT USSD feature tag into IMS registration. ussdAcceptContact = "+g.3gpp.nw-init-ussi" #This config is required to configure the default invite retry counter. inviteRetryCounter = 2 #This config is required to select the default emergency URI if sub category matches with multiple entries e911SelectDefURI = 1 #This config is required to disable early media timer. disableEarlyMediaTimer = 0 #This config is required to configure the voice call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network voiceCallCancelTimer = 0 #This config is required to place AMR WB before AMR in encryption call. preferAMRWBinEncryptionCall = 0 #This config is required to enable PEM header in 183. enablePEMHeaderIn183 = 0 #This config is required to configure the default URI type #(SIP/TEL) for MO calls. uriType = QPE_IMS_URI_TEL #This config is required to configure the enabling of sending REINVITE #during Active calls HO. reInviteonHOforActiveCalls = 0 #This config is required to configure the terminating identity presentation or restriction type. *terminatingIdentityService = 0 #This config is required to configure the default WPS fallback duration. wpsFallbackDuration = 0 #This config is required to configure the ignoring of AS value ignoreASValidation = 0 #This config is required to configure the max-red value max_red = 220 #This config is required to set error code for CT submode. sessionEndResponseTimeout = 0 #This config is required to enable VoWIFI Call Continuity to LTE NonVOPS. enableVCCtoLTENonVOPS = 0 #This config is required to enable emergency call operation in CS-only mode. emergCallCSOnly = 0 #This config is required to configure number format during roaming, geo-local/home-local phoneContextPolicy = QPE_IMS_PHONE_CONTEXT_GEO_LOCAL #This config is required to enable Call end on RTP inactivity. CallEndonRTPInactivity = 0 #This config is required to set the phone context domain source. PhoneContextSource = QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_MCC_MNC #This config is required to set preconditions enabled with qos events ignored. ignoreQOSEvents = 0 #This config is required to enable the MT USSI. enableMTUSSI = 1 #This config is required to configure the privacy type. Set 0: for none, 1: for id, 2: for header. privacyType = 2 [Registration:RegistrationDefaultParams] #This config item will be used to configure default UserName to register with Network userName = "" #This config item will be used to configure default authType to register with Network authType = "" #This config item will be used to configure default Display Name to register with Network displayName = "" #This config item will be used to configure default DomainName to register with Network domainName = "" #This config item will be used to configure default authSecertKey authSecertKey = "465b5ce8b199b49faa5f0a2ee238a6bc" #This config item will be used to configure default Private URI to register with Network privateURI = "" #This config item will be used to configure default is3GPP is3GPP = 0 #This config item will be used to configure default Realm to register with Network realm = "" #This config item will be used to configure default public URI to register with Network publicURI = "" #This config item will be used to configure default Password to register with Network password = "" [QIPCALL:ImsVoiceSuppsConfig] #This config is required to configure the timer for Notify #response to Refer. notifyReferRspTimer = 20 #This config is required to end the conference call automatically #when all other participants left the call. endConfCallUponNoParticipant = 1 #This config is required to enable presentation of the call to #the user when UE is already in two calls (active and held). *presentThirdCalltoUser = 1 #This config is required to configure the conference event #package subscription timer. confEvtSubTimer = 3600 #This config is required not to send unsubscribe to NW for conference call when there is #no notify-terminated received. isUnsubcribeDisabled = 0 #This config is required to configure the dialog for the #conference event subscribe request. confEvtSubOutOfDialog = 1 #This config is required to configure the three party conf URI #for KDDI. threePartyConfFactoryUri = "" #This config is required to enable the conference event package #subscription. confEvtPakageEnabled = QPE_IMS_CONF_PCKG_ORIGINATOR_ONLY [QIPCALL:ImsRtcpXRConfig] #This config is required to enable RTCP-XR support. rtcpXrEnabled = 0 [SMSDAN:DANSettings] #This config item controls QIPCall 1x SMS and Voice Enabled (0:DAN SMS can be sent only if there is no voice call. #1:Enabled; DAN and MO SMS can be sent even when a voice call is up). smsAndVoiceOver1x = 0 #This NV item is used for configuring the transport channel preference on which DAN is to be sent. channelPreference = 0 #This config item controls the DAN Retry Timer Interval Duration (In ms) retryTimer = 0 #This config item controls the DAN Max Retry Counter maxRetryCount = 0 #This NV item is used for controlling DAN Hysterisis Timer Duration hysterisisTimer = 0 [QIPCALL:H263_0] #payload type number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationCounters] #This config item controls the Immediate Retry timer for failures maxPDNIntermediateRetries = 1 [QIPCALL:ImsVideoConfig] #This config is required to configure the LTR mode. ltrMode = QP_CONFIG_IMS_LTR_DISABLED #This config is required to configure if VT capability can be impacted by modile data. vtImpactedByMobileData = 1 #This config is required to set the video_capability_for_invite_no_sdp for #incoming INVITE without SDP. video_capability_for_invite_no_sdp = 1 #Internal:This config is required to store peer supported #services trackPeerServices = 0 [SIPConfig:Transport] #above this size choose TCP and value 0 means disable tcp port open on UE TCPThresholdValue = 1230 #enable or disable TCP Static threshold TCPEnableStaticThreshold = 0 [SIPConfig:StandardTimers] #sip registration expires value SipRegValue = 0 #sip reg subscription expires value SipSubscribeValue = 0 [SIPConfig:IPSec] #integrity scheme for ipsec sip messages IntScheme = 3 #encryption algo for ipsec sip messages EncAlgo = 7 [SMSDAN:SMSSettings] #This config item used to configure the error code and used while reject Incoming MT sms while NAS is busy in service one SMS. IncomingSmsRejectCode = 400 #This config item used to enable or disable feature of rejecting incoming SMS when IMS is already processing a SMS. EnableIncomingSmsRejectFeature = 0 #This config item controls the SMS Feature tag smsAcceptContact = "+g.3gpp.smsip" [MEDIA:MediaCommon] #This config item specifies if overall rate adaptation feature is enabled or not. audioRAEnable = 1 #This config item specifies maximum mtu size for the rtp packet mtuSize = 1400 [Registration:RegistrationSettings] #This config item controls Registration over IWLAN in airplane mode enableRegistrationInLPM = 2 #This config item controls PCSCF IP fallback feature pcscfBasedIPFallback = 0 #This config item controls TTY over IMS enableTTYOverIMS = 0 #This config item controls Reregistration over WIFI during Activate 3G call BlockRegOverWifiWhileActiveCSCall = 1 #This config item controls Reregistration over WIFI during Activate 1x call BlockRegOverWifiWhileActive1XCall = 0 [Ut:XcapHCConfigUserProfile] #This config item controls the configured user name configUserName = "" #This config item controls the configured user name configUserPassword = "" [DPL:Common] #This config item determines usage to read the SIM card parameters (ISIM, USIM ) etc #Possible INTEGER values for override are as follows: #QPE_CONFIG_IMS_FILE_READ = 0 --> File Read Param Source #QPE_CONFIG_IMS_NV_READ = 1 --> NV Read Param Source #QPE_CONFIG_IMS_CARD_READ = 2 --> Card Read Param Source to read from ISIM #QPE_CONFIG_IMS_FILE_READ_AUTH_ENABLED = 3 --> File Read Param Auth enabled (ONLY for testing) #QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED = 4 --> USIM fallback enabled ParamSrc = QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED [QIPCALL:ImsMediaProfileConfig] #This config is required to video codec profile list on 4G. VideoProfile1 = "H264_0" #This config is required to audio codec profile list. *AudioProfile1 = "AMR_1_102;AMR_4_103;AMR_0_104;AMR_2_105" [QIPCALL:ImsVoWifiConfig] #This config is required to configure the wifi connectivity #backoff timer. wifiConnectivityBackoffTimer = 10 [MEDIA:MediaDscp] #This config item specifies dscp value for audio audio = 46 #This config item specifies dscp value for video video = 46 [QIPCALL:ImsVideoModifyConfig] #This config is required to configure the timer in msecs for #waiting on user response to the incoming upgrade req. localUpgradeAcceptTimer = 20000 #This config is required to configure the timer in secs for #response from the peer to the sent upgrade req. remoteUpgradeRejectTimer = 40 [SIPConfig:CustomTimers] #reliable response retry timer cap TRelResponseRetry = 0 "

efs:/google (5)

efs:/google/paris_version = "g670_default_32_201910022029 "
efs:/google/cust_ims_ua_enable = 1
efs:/google/user_agent_template = "Videotron [MI__ap] [SW__ap]"
efs:/google/cust_modem_features = 991
efs:/google/fd_timers.conf = 85899345940x200000002

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -118; LTEDLRSRPThresholdTargetHigh = -115; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 3; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -15; WCDMA_TRAT_ECIO_Threshold = -10; WCDMA_SRAT_RSCP_Threshold = -115; WCDMA_TRAT_RSCP_Threshold = -110; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -125; LTE_RSRP_Single_in = -118; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -170; LTE_SNR_Single_out = 75; LTE_SNR_Single_in = 85; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/data/3gpp (2)

3GPP MTUlikely = 1440
Default PDN MTU in bytesefs:/nv/item_files/data/3gpp/ds_3gpp_mtu
RPM paramslikely =
Radio Policy Manager retry limits (10 bytes)efs:/nv/item_files/data/3gpp/rpm_params

efs:/nv/item_files/data/dsd (2)

ds_apn_switchingunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/dsd/ds_apn_switching
data_wlan_throttle_timerunverified = 30
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/dsd/data_wlan_throttle_timer

efs:/nv/item_files/data/wlan_config (3)

wlan_offload_configunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wlan_offload_config
iwlan_s2b_mtu_valunverified = 1280
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/iwlan_s2b_mtu_val
wifi_oos_linger_timerunverified = 3
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wifi_oos_linger_timer

efs:/nv/item_files/datamodem/protocols (1)

efs:/nv/item_files/datamodem/protocols/ip6_default_mtu = 1440

efs:/nv/item_files/gps/cgps/sm (4)

gnss_1x_up_supl_enableunverified = 0
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_1x_up_supl_enable
gnss_agps_rat_pref_configunverified = 167769610xffff01
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_agps_rat_pref_config
gnss_assisted_glo_protocol_selectunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_assisted_glo_protocol_select
gnss_lpp_enableunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lpp_enable

efs:/nv/item_files/ims (24)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 1= Enabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 2
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item

efs:/nv/item_files/modem (1)

LTE connection controlunverified = 1
efs:/nv/item_files/modem/lte_connection_control

efs:/nv/item_files/modem/data (1)

dynamic_port_cfgunverified = 2
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/dynamic_port_cfg

efs:/nv/item_files/modem/data/3gpp (3)

umts_nw_initiated_qos_supportunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/umts_nw_initiated_qos_support
Call before PS attachlikely = 0= Off
Allow data-call origination before PS attachefs:/nv/item_files/modem/data/3gpp/call_orig_allowed_before_ps_attach
L_to_W_qos_continuityunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/L_to_W_qos_continuity

efs:/nv/item_files/modem/data/3gpp/ps (2)

Service request throttle behaviourlikely = 1
Service-request throttling behaviourefs:/nv/item_files/modem/data/3gpp/ps/ser_req_throttle_behavior
ds_3gpp_redial_for_no_causeunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/ds_3gpp_redial_for_no_cause

efs:/nv/item_files/modem/data/dsmgr (1)

wlan_3g_ip_continuity_enabledunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/dsmgr/wlan_3g_ip_continuity_enabled

efs:/nv/item_files/modem/data/epc (1)

PDN throttling configlikely = "FAILURE_TIMER_5:20; "
Carrier PDN throttling timersefs:/nv/item_files/modem/data/epc/pdn_throttling_config.txt

efs:/nv/item_files/modem/lte/rrc/cap (5)

fgiunverified = 21443375980x7fcffebe
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi
fgi_rel9unverified = 32212254720xc0000000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi_rel9
fgi_r10unverified = 10761011200x40240000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fgi_r10
mdt_r10_feature_disableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/mdt_r10_feature_disable
lte_feature_disableunverified =
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/lte_feature_disable

efs:/nv/item_files/modem/lte/rrc/cep (2)

conn_control_param_cfgunverified = 39337010x3c0605
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cep/conn_control_param_cfg
conn_control_barring_optmz_enableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cep/conn_control_barring_optmz_enable

efs:/nv/item_files/modem/mmode (15)

LTE band preferencelikely = ffffffffff7dffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref
SMS onlylikely = 0= Off
Register for SMS onlyefs:/nv/item_files/modem/mmode/sms_only
UE usage settinglikely = 0= Voice centric
TS 24.301 UE usage settingefs:/nv/item_files/modem/mmode/ue_usage_setting
LTE disable durationlikely = 0
How long LTE stays disabled when CS services are unavailableefs:/nv/item_files/modem/mmode/lte_disable_duration
SMS domain preference = 1= PS (IMS) SMS preferred
SMS over IMS preferenceefs:/nv/item_files/modem/mmode/sms_domain_pref
SMS mandatorylikely = 1= On
SMS is mandatory for the device (block LTE if IMS/SGs SMS registration fails)efs:/nv/item_files/modem/mmode/sms_mandatory
Voice domain preference = 3= IMS PS voice preferred
E-UTRAN voice domain (TS 24.301 9.9.3.44)efs:/nv/item_files/modem/mmode/voice_domain_pref
ue_based_cwunverified = 257
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/ue_based_cw
mid_call_srvcc_infounverified = 12800010x138801
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/mid_call_srvcc_info
lte_nas_ignore_mt_csfb_during_volte_callunverified = 0
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_nas_ignore_mt_csfb_during_volte_call
supplement_service_domain_prefunverified = 3
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/supplement_service_domain_pref
custom_emerg_infounverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/custom_emerg_info
lte_emerg_redialunverified = 657930x10101
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_emerg_redial
e911_prioritize_psunverified = 1
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/e911_prioritize_ps
lte_bandpref_extn_65_256unverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_bandpref_extn_65_256

efs:/nv/item_files/modem/mmode/sd (1)

full_srv_req_in_emerg_extunverified = 1
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/sd/full_srv_req_in_emerg_ext

efs:/nv/item_files/modem/nas (1)

Ignore MT CSFB during VoLTE = 1= On
Ignore a mobile-terminated CSFB page while a VoLTE call is activeefs:/nv/item_files/modem/nas/lte_nas_ignore_mt_csfb_during_volte_call

efs:/nv/item_files/modem/sms (1)

Refresh vote OKlikely = 1= On
Vote TRUE for SIM REFRESHefs:/nv/item_files/modem/sms/mmgsdi_refresh_vote_ok

efs:/nv/item_files/modem/uim/gba (5)

bsf_addressunverified =
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/gba/bsf_address
custom_realmunverified = 1
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/gba/custom_realm
custom_user_agent_tmpiunverified = 1
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/gba/custom_user_agent_tmpi
http_header_imeiunverified = "X-MOBILE-IMEI"
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/gba/http_header_imei
access_point_nameunverified = "mobile.ng"
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/gba/access_point_name

efs:/nv/item_files/modem/uim/gstk (1)

feature_bmskunverified = 1342177980x8000046
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/gstk/feature_bmsk

efs:/nv/item_files/wcdma (1)

rrc_ganss_support_nvunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc_ganss_support_nv

efs:/nv/item_files/wcdma/rrc (5)

wcdma_rrc_wtol_cm_supportunverified = 0
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_wtol_cm_support
wcdma_ppac_supportunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_ppac_support
wcdma_rrc_fast_return_to_lte_after_csfb_timerunverified = 2000
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_fast_return_to_lte_after_csfb_timer
WCDMA RRC featurelikely = 5
WCDMA RRC feature maskefs:/nv/item_files/wcdma/rrc/wcdma_rrc_feature
wcdma_rrc_dormancy_supportunverified = 1
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/rrc/wcdma_rrc_dormancy_support

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

efs:/sd (1)

efs:/sd/rat_acq_order =

nv (26)

UIM First Instruction Classlikely = 1
nv:896
GSM AMR Call Configurationlikely = 1
nv:1302
AAGPS Default QoS Timelikely = 64
nv:1918
AAGPS Positioning Modes Supportedlikely = 65407
nv:1920
AAGPS Use Transport Securitylikely = 1= On
Enable user-plane (SUPL) secure transportnv:3758
GNSS SUPL Versionlikely = 131072= 2.0.00x20000
nv:6792
Bannerlikely = "Video_VW"
nv:71
Acquisition Order Preferencelikely = 0
nv:848
Network Selection Mode Preferencelikely = 0
nv:849
GSM/UMTS Cell Broadcast SMS Service Tablelikely
nv:1014/1
ActiveService = 1
ServiceFrom = 4370
ServiceTo = 4379
Selected = 1
Label = 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
LabelEncoding = 0
BcAlert = 0
MaxMessages = 0
GSM/UMTS Cell Broadcast SMS Service Table Sizelikely = 1
nv:1015
GSM/UMTS Cell Broadcast SMS User Preferencelikely = 2
nv:1017
MS SMS Max Number Of SMSlikely = 23
nv:3006
SMS MO Retry Periodlikely = 180
nv:3532
SMS MO Retry Intervallikely = 45
nv:3533
Disable CM Call Typelikely = 0
nv:5280
Hybrid preference = 1= On
Hybrid CDMA 1x + HDR operationnv:562
CS TO VOIP Fallback Timerlikely = 10
nv:6830
VOIP Cancel Retry Timerlikely = 10
nv:6831
ENHANCED HPLMN SRCH TBLlikely =
nv:6844
RRC Integrity Enabledlikely = 1
nv:880
RRC Ciphering Enabledlikely = 1
nv:881
RRC Fake Security Enabledlikely = 0
nv:882
WCDMA RX Diversity Controllikely = 3
nv:3851
WCDMA HSUPA CM Controllerlikely = 1
nv:5090
CPU Based Flow Controllikely = 1
nv:4261