carrier-explode Explode and decode carrier data GitHub About
 telstra_au

Optus_Australia_Commercial in the Qualcomm modem firmware of SP2A.220505.008.

Header
MCFG version08014411
LabelOptus_Australia_Commercial
Version11440108
Base version01440108
Capability14000000
Digest¸wVrÉp®!3#l™Îvâys M% "¯¡ÒMþÛLa
Trailer version0001
Selected by (1)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC50502any SIM
Settings (88)

efs:/data (5)

ds_dsd_attach_profile.txtunverified = "Attach_Profile_ID:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_dsd_attach_profile.txt
iwlan_s2b_config.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/iwlan_s2b_config.xml
ds_andsf_config.txtunverified = "andsf_rule_mgr_active:1; lte_meas_alpha:50; lte_sampling_interval:1000; lte_avg_interval:5000; wifi_meas_alpha:65; wifi_sampling_interval:1000; wifi_avg_interval:5000; cdma_1x_meas_alpha:50; cdma_1x_avg_interval:6000; cdma_1x_acq_hyst_interval:3000; cdma_1x_lost_hyst_interval:3000; cdma_1x_sampling_interval:2000;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_andsf_config.txt
Default ANDSFlikely =
ANDSF Wi-Fi/cellular steering policy (TS 24.312)efs:/data/default_andsf.xml
andsf.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/andsf.xml

efs:/Data_Profiles (4)

efs:/Data_Profiles/Profile1 =
efs:/Data_Profiles/Profile2 =
efs:/Data_Profiles/Profile3 =
efs:/Data_Profiles/Profile4 =

efs:/efsprofiles (1)

efs:/efsprofiles/overideconfig = " [SIPConfig:GeoLocation] #enable or disable location info inclusion in regular calls iEnableCellInfoInPANI = 0 #enable or disable location info inclusion in regular calls iEnableLocInfoInNormalCall = 0 #enable or disable location info inclusion in emergency calls iEnableLocInfoInEmergencyCall = 1 [QIPCALL:H264_2] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 117 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 118 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_1] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 115 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 116 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_0] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 7 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 113 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 114 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 384 #Preffered bitrate bitrate_preferred = 384 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:EVS_0] #channel aware setting ch_aw_recv = -1 #This config is used for hf only hf_only = 0 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. It has to be in DECIMAL format. BitRate = 120 #Enable EVS, 20180828 [QIPCALL:EVS_1] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, *Bandwidth = 5 #This config is used for bit rate. *BitRate = 127 [QIPCALL:EVS_2] #channel aware setting ch_aw_recv = -1 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:EVS_3] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:H265_2] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationTimers] #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for SSIM device wlanGaurdTimer = 7 #This config item controls the Register configuration for the network-initiated De reg Timer value. networkInitiatedDeRegistrationTimer = 0 #This config item controls the Retry timer for permanent PDP failures pdnRetryLongTimer = 10 #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for MSIM device wlanGaurdTimerMSIM = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for SSIM device wwanGaurdTimer = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for MSIM device wwanGaurdTimerMSIM = 10 #This config item controls the Retry timer for temporary failures pdnRetryShortTimer = 60 [QIPCALL:H265_0] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [QIPCALL:H265_1] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Ut:UtConfiguration] #This config item controls the media element type for Call Barring Service. 0:No media tag support, 1:One media tag per media type, 2: include both audio and video tags mediaElementSupportForCB = 0 #This config item specifies if the realm is to trimmed or not. 0:Not enabled(default), 1:enabled isTrimRealmEnabled = 0 #This config item specifies if IR92v10 is enabled or not. 0:Not enabled(default), 1:enabled isIr92V10Enabled = 0 #This config item controls the time for which the PDN needs to be kept Active after a SS request is completed pdnHysTimerValue = 0 #This config item controls the Maximum time within which a Response should be sent to UI maxResponseTimerValue = 0 #This config item controls the action item when there is no SIB value for CB request. 0:Default, 1:Reject, 2:Audio Only, 3:Both Audio and Video emptySIBUsageForCB = 0 #This config item controls the action item. When a rule id is not present in a server xml, a request is not allowed. It is used on VDF-Portugal only now. 0:Not to check a rule ID(Default), 1:Block a request when rule ID is not present in a server xml blockIfRuleIDAbsent = 0 [SIPConfig:FeatureFlags] #enable or disable sip instance inclusion in contact header IsSipInstanceNeeded = 0 #enable or disable Cellular-Network-Info header IsCNIEnabled = 1 #enable or disable header compact form IsCompactFormEnabled = 0 #enable or disable IsUIReadyStatusCheckNeeded IsUIReadyStatusCheckNeeded = 0 #disable StopTimerBon1xx once 1xx response is not received StopTimerBon1xx = 0 #enable or disable IsImsiNeededForContactHeader IsImsiNeededForContactHeader = 0 #Based on Optus SPEC to enable bSrvcc, aSRVCC and midcall Srvcc Tom Tseng, 2018/1/3 [QIPCALL:ImsVoiceSrvccConfig] #This config is required to enable bSRVCC. *bSrvccEnabled = 1 #This config is required to enable aSRVCC. *aSrvccEnabled = 1 #This config is required to enable mid call SRVCC. *midcallSrvccEnabled = 1 [QIPCALL:ImsRtcpConfig] #This config is required to configure the RR bandwidth for Video. rrForVideo = 2000 #This config is required to configure the timer for RTCP #monitoring. rtcpLinkAlivenessTimer = 20 #This config is required to configure the RS bandwidth for Audio. rsForAudio = 600 #This config is required to disbale/enable the RTCP monitoring. disableRTCPMonitoring = 0 #This config is required to configure the timer for RTCP #Reporting in VT call. rtcpReportingIntervalInVideo = 1 #This config is required to configure the RS bandwidth for Video. rsForVideo = 600 #This config is required to configure the RR bandwidth for Audio. rrForAudio = 2000 [QIPCALL:AMR_4] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:G711_2] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMA [QIPCALL:G711_1] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:G711_0] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:AMR_0] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_1] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_2] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:AMR_3] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:ImsVoiceQoSConfig] #This config is required to enable sending SDP answer in PRACK #for 183 if the local qos is granted before 183 response is recvd by #the UE. qosOptimization = 0 #This config is required to configure the timer for dedicated #bearer allocation. qosReservationTimer = 8000 #This config is required to enable set the desired qos strength #for local and remote UEs. qosDesiredStrength = 1 #This config is required to enable 183 for Reneg qosMc183 = 0 #This config is required to configure if the UE must wait for #video dedicated bearer allocation during call setup. localQosResReqVideo = 1 #This config is required to configure if the UE must wait for #text dedicated bearer allocation during call setup. localQosResReqText = 1 #This config is required to configure the early QoS timer for video dedicated #bearer allocation. earlyQosReservationTimer = 0 #This config is required to enable Qos precondition negotiation #in SDP. qosPreconditionsEnabled = 0 #This config is required to enable Qos MC precondition negotiation #in SDP. qosMcPreconditionsEnabled = 0 #This config is required to configure the MBR threshold. iMBRthresholdValue = 0 #This config is required to configure if the UE must wait for #audio dedicated bearer allocation during call setup. localQosResReqAudio = 1 #This config is required to configure if the initial SDP #directionality should be inactive in REINVITE when preconditions are #used reinviteSdpDirInactive = 0 #This config is required to enable MBR check for video bearer. qosMbrVideoCheckReqEnabled = 1 #This config is required to configure if the initial SDP #directionality should be inactive when preconditions are used. inviteSdpDirInactive = 0 #This config is required to enable MBR check for audio bearer. qosMbrAudioCheckReqEnabled = 0 #This config is required to enable mid-call precondition for Call Hold/Resume qosMcHold = 0 [Ut:XCAPCommonHC] #This config item controls the configuration of BSF server address bsfServerAddress = "" #This config item controls whether GBA_U is enabled or not useGBAMEOnly = 1 #This config item controls whether ims prefix is added or not for Ub request like as bsf.ims.mnc005.mcc232.pub.3gppnetwork.org includeIMSPrefixForUSIM = 0 #This config item controls whether BSF server supports TLS bsfServerTlsSupport = 0 [Registration:RegistrationFeatureFlags] #This config item specifies if the sub operator is APTG and special handling is required for Options unsubscribed error or not. 0:Not enabled(default), 1:enabled optionsUnsubscribedSpecialHandling = 0 [QIPCALL:ImsVoiceSessionTimerConfig] #This config is required to configure the session refresher shall #be UAC/UAS. sessionRefresherType = QP_CONFIG_SES_REFRESHER_UAC #This config is required to enable session timer support. sessionTimerEnabled = 1 #This config is required to enable Stand Alone Session Expiry #negotiation. standAloneEnabled = 1 #This config is required to enable Sesssion Expiry timer #negotiation. allowSeNegotiation = 0 #This config is required to configure the method for session #referesh shall be REINVITE/UPDATE. sessionRefresherMethod = QP_CONFIG_SES_REFRESH_UPDATE [QIPCALL:ImsVoiceConfig] #This config is required to configure the Emergency call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network emergencyCallCancelTimer = 500 #This config is required to configure the default WPS invite duration. wpsInviteDuration = 0 #This config is required to enable 380 response validation as per #3GPP. enableAlternateSrvRspCheck = 1 #This config is required to set the display text priority #subscription. displayTextPriority = 2 #This config is required to include MTT USSD feature tag into IMS registration. ussdAcceptContact = "+g.3gpp.nw-init-ussi" #This config is required to configure the default invite retry counter. inviteRetryCounter = 2 #This config is required to select the default emergency URI if sub category matches with multiple entries e911SelectDefURI = 0 #This config is required to disable early media timer. disableEarlyMediaTimer = 0 #This config is required to configure the voice call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network voiceCallCancelTimer = 0 #This config is required to enable PEM header in 183. enablePEMHeaderIn183 = 0 #This config is required to configure the default URI type #(SIP/TEL) for MO calls. uriType = QPE_IMS_URI_TEL #This config is required to configure the terminating identity presentation or restriction type. *terminatingIdentityService = 0 #This config is required to configure the default WPS fallback duration. wpsFallbackDuration = 0 #This config is required to configure the ignoring of AS value ignoreASValidation = 0 #This config is required to set error code for CT submode. sessionEndResponseTimeout = 0 #This config is required to enable VoWIFI Call Continuity to LTE NonVOPS. enableVCCtoLTENonVOPS = 0 #This config is required to enable emergency call operation in CS-only mode. emergCallCSOnly = 0 #This config is required to configure number format during roaming, geo-local/home-local phoneContextPolicy = QPE_IMS_PHONE_CONTEXT_GEO_LOCAL #This config is required to set the phone context domain source. PhoneContextSource = QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_MCC_MNC #This config is required to set preconditions enabled with qos events ignored. ignoreQOSEvents = 0 #This config is required to enable the MT USSI. enableMTUSSI = 1 #This config is required to configure the privacy type. Set 0: for none, 1: for id, 2: for header. *privacyType = 1 [Registration:RegistrationDefaultParams] #This config item will be used to configure default UserName to register with Network userName = "" #This config item will be used to configure default authType to register with Network authType = "" #This config item will be used to configure default Display Name to register with Network displayName = "" #This config item will be used to configure default DomainName to register with Network domainName = "" #This config item will be used to configure default authSecertKey authSecertKey = "465b5ce8b199b49faa5f0a2ee238a6bc" #This config item will be used to configure default Private URI to register with Network privateURI = "" #This config item will be used to configure default is3GPP is3GPP = 0 #This config item will be used to configure default Realm to register with Network realm = "" #This config item will be used to configure default public URI to register with Network publicURI = "" #This config item will be used to configure default Password to register with Network password = "" [QIPCALL:ImsVoiceSuppsConfig] #This config is required to configure the timer for Notify #response to Refer. notifyReferRspTimer = 20 #This config is required to end the conference call automatically #when all other participants left the call. endConfCallUponNoParticipant = 1 #This config is required to enable presentation of the call to #the user when UE is already in two calls (active and held). *presentThirdCalltoUser = 1 #This config is required to configure the conference event #package subscription timer. confEvtSubTimer = 3600 #This config is required to configure the dialog for the #conference event subscribe request. confEvtSubOutOfDialog = 1 #This config is required to configure the three party conf URI #for KDDI. threePartyConfFactoryUri = "" #This config is required to enable the conference event package #subscription. confEvtPakageEnabled = QPE_IMS_CONF_PCKG_ORIGINATOR_ONLY [QIPCALL:ImsRtcpXRConfig] #This config is required to enable RTCP-XR support. rtcpXrEnabled = 0 [SMSDAN:DANSettings] #This config item controls QIPCall 1x SMS and Voice Enabled (0:DAN SMS can be sent only if there is no voice call. #1:Enabled; DAN and MO SMS can be sent even when a voice call is up). smsAndVoiceOver1x = 0 #This NV item is used for configuring the transport channel preference on which DAN is to be sent. channelPreference = 0 #This config item controls the DAN Retry Timer Interval Duration (In ms) retryTimer = 0 #This config item controls the DAN Max Retry Counter maxRetryCount = 0 #This NV item is used for controlling DAN Hysterisis Timer Duration hysterisisTimer = 0 [QIPCALL:H263_0] #payload type number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationCounters] #This config item controls the Immediate Retry timer for failures maxPDNIntermediateRetries = 1 [QIPCALL:ImsVideoConfig] #This config is required to configure the LTR mode. ltrMode = QP_CONFIG_IMS_LTR_DISABLED #This config is required to set the video_capability_for_invite_no_sdp for #incoming INVITE without SDP. video_capability_for_invite_no_sdp = 1 #Internal:This config is required to store peer supported #services trackPeerServices = 0 [SIPConfig:Transport] #above this size choose TCP and value 0 means disable tcp port open on UE TCPThresholdValue = 1500 #enable or disable TCP Static threshold TCPEnableStaticThreshold = 0 [SIPConfig:StandardTimers] #sip registration expires value SipRegValue = 0 #sip reg subscription expires value SipSubscribeValue = 0 [SIPConfig:IPSec] #integrity scheme for ipsec sip messages IntScheme = 3 #encryption algo for ipsec sip messages EncAlgo = 7 [SMSDAN:SMSSettings] #This config item controls the SMS Feature tag smsAcceptContact = "+g.3gpp.smsip" [MEDIA:MediaCommon] #This config item specifies if overall rate adaptation feature is enabled or not. audioRAEnable = 1 #This config item specifies maximum mtu size for the rtp packet mtuSize = 1400 [Registration:RegistrationSettings] #This config item controls Registration over IWLAN in airplane mode enableRegistrationInLPM = 2 #This config item controls PCSCF IP fallback feature pcscfBasedIPFallback = 0 #This config item controls TTY over IMS enableTTYOverIMS = 0 #This config item controls Reregistration over WIFI during Activate 3G call BlockRegOverWifiWhileActiveCSCall = 1 #This config item controls Reregistration over WIFI during Activate 1x call BlockRegOverWifiWhileActive1XCall = 0 [Ut:XcapHCConfigUserProfile] #This config item controls the configured user name configUserName = "" #This config item controls the configured user name configUserPassword = "" [DPL:Common] #This config item determines usage to read the SIM card parameters (ISIM, USIM ) etc #Possible INTEGER values for override are as follows: #QPE_CONFIG_IMS_FILE_READ = 0 --> File Read Param Source #QPE_CONFIG_IMS_NV_READ = 1 --> NV Read Param Source #QPE_CONFIG_IMS_CARD_READ = 2 --> Card Read Param Source to read from ISIM #QPE_CONFIG_IMS_FILE_READ_AUTH_ENABLED = 3 --> File Read Param Auth enabled (ONLY for testing) #QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED = 4 --> USIM fallback enabled ParamSrc = QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED [QIPCALL:ImsMediaProfileConfig] #This config is required to video codec profile list on 4G. VideoProfile1 = "H264_0" #Enable EVS, 20180828 #This config is required to audio codec profile list. *AudioProfile1 = "EVS_1_126;AMR_1_104;AMR_0_102" [QIPCALL:ImsVoWifiConfig] #This config is required to configure the wifi connectivity #backoff timer. wifiConnectivityBackoffTimer = 10 [MEDIA:MediaDscp] #This config item specifies dscp value for audio audio = 46 #This config item specifies dscp value for video video = 46 [QIPCALL:ImsVideoModifyConfig] #This config is required to configure the timer in msecs for #waiting on user response to the incoming upgrade req. localUpgradeAcceptTimer = 20000 #This config is required to configure the timer in secs for #response from the peer to the sent upgrade req. remoteUpgradeRejectTimer = 40 [SIPConfig:CustomTimers] #reliable response retry timer cap TRelResponseRetry = 0 "

efs:/google (3)

efs:/google/paris_version = "g670_default_32_201910022029 "
efs:/google/cust_ims_ua_enable = 1
efs:/google/user_agent_template = "Optus Google [MI__ap] Android [SW__ap]"

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -113; LTEDLRSRPThresholdTargetHigh = -104; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 3; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -15; WCDMA_TRAT_ECIO_Threshold = -10; WCDMA_SRAT_RSCP_Threshold = -108; WCDMA_TRAT_RSCP_Threshold = -99; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -125; LTE_RSRP_Single_in = -118; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -170; LTE_SNR_Single_out = 75; LTE_SNR_Single_in = 85; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/data/wlan_config (2)

wlan_offload_configunverified = 2
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wlan_offload_config
rat_pref_for_non_ims_pdnunverified = 0
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/rat_pref_for_non_ims_pdn

efs:/nv/item_files/gps/cgps/sm (2)

gnss_lpp_enableunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lpp_enable
gnss_lppe_cp_configunverified = 19
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lppe_cp_config

efs:/nv/item_files/ims (24)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 1= Enabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 2
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item

efs:/nv/item_files/modem/data/3gpp/dsmgr (1)

emergency_apn_typeunverified = 1310730x20001
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/dsmgr/emergency_apn_type

efs:/nv/item_files/modem/data/3gpp/ps (1)

modem_def_prof_supportunverified = No value
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/modem_def_prof_support

efs:/nv/item_files/modem/lte/rrc/cap (2)

lte_feature_disableunverified =
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/lte_feature_disable
mdt_r10_feature_disableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/mdt_r10_feature_disable

efs:/nv/item_files/modem/mmode (13)

SMS onlylikely = 0= Off
Register for SMS onlyefs:/nv/item_files/modem/mmode/sms_only
UE usage settinglikely = 0= Voice centric
TS 24.301 UE usage settingefs:/nv/item_files/modem/mmode/ue_usage_setting
LTE disable durationlikely = 0
How long LTE stays disabled when CS services are unavailableefs:/nv/item_files/modem/mmode/lte_disable_duration
SMS domain preference = 1= PS (IMS) SMS preferred
SMS over IMS preferenceefs:/nv/item_files/modem/mmode/sms_domain_pref
SMS mandatorylikely = 1= On
SMS is mandatory for the device (block LTE if IMS/SGs SMS registration fails)efs:/nv/item_files/modem/mmode/sms_mandatory
Voice domain preference = 3= IMS PS voice preferred
E-UTRAN voice domain (TS 24.301 9.9.3.44)efs:/nv/item_files/modem/mmode/voice_domain_pref
ue_based_cwunverified = 257
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/ue_based_cw
mid_call_srvcc_infounverified = 10995129077770x10000138801
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/mid_call_srvcc_info
get_net_auto_modeunverified
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/get_net_auto_mode
Version = 0
Value = 1
Reserved = 0
lte_emerg_redialunverified = 657930x10101
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_emerg_redial
supplement_service_domain_prefunverified = 3
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/supplement_service_domain_pref
wifi_configunverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/wifi_config
LTE band preferencelikely = ffffffffff7fffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref

efs:/nv/item_files/modem/nas (4)

Ignore MT CSFB during VoLTE = 1= On
Ignore a mobile-terminated CSFB page while a VoLTE call is activeefs:/nv/item_files/modem/nas/lte_nas_ignore_mt_csfb_during_volte_call
reg_nv_itemsunverified =
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/reg_nv_items
Max validate SIM counterlikely = 3
SIM validation retry limitefs:/nv/item_files/modem/nas/max_validate_sim_counter
t3245_timerunverified = 30
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/t3245_timer

efs:/nv/item_files/modem/sms (1)

Refresh vote OKlikely = 1= On
Vote TRUE for SIM REFRESHefs:/nv/item_files/modem/sms/mmgsdi_refresh_vote_ok

efs:/nv/item_files/modem/uim/mmgsdi (1)

slot_features_status_listunverified =
SIM setting: UIM / SIM manager / SIM Toolkitefs:/nv/item_files/modem/uim/mmgsdi/slot_features_status_list

efs:/nv/item_files/wcdma/l1 (1)

wl1_nb_rejection_nvunverified = 019001000010050a
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/l1/wl1_nb_rejection_nv

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

efs:/sd (1)

efs:/sd/rat_acq_order =

nv (20)

Bannerlikely = "Optus_AU"
nv:71
Acquisition Order Preferencelikely = 0
nv:848
Network Selection Mode Preferencelikely = 0
nv:849
GSM/UMTS SMS Bearer Preferencelikely = 2
nv:909
GSM/UMTS Cell Broadcast SMS Carrier Configurationlikely = 1
nv:1016
GSM/UMTS Cell Broadcast SMS User Preferencelikely = 2
nv:1017
MS SMS Max Number Of SMSlikely = 23
nv:3006
SMS MO Retry Periodlikely = 180
nv:3532
SMS MO Retry Intervallikely = 45
nv:3533
UMTS AMR Codec Preference Configlikely = 15
nv:6850
NAS Release Compliancelikely = 3
nv:4722
Mode preference = 31= GWL
Digital/Analog Mode Preferencenv:10
Hybrid preference = 1= On
Hybrid CDMA 1x + HDR operationnv:562
CS TO VOIP Fallback Timerlikely = 10
nv:6830
VOIP Cancel Retry Timerlikely = 10
nv:6831
AAGPS Default QoS Timelikely = 64
nv:1918
AAGPS Positioning Modes Supportedlikely = 65407
nv:1920
RRC Integrity Enabledlikely = 1
nv:880
RRC Ciphering Enabledlikely = 1
nv:881
RRC Fake Security Enabledlikely = 0
nv:882

Telstra_Australia_Commercial in the Qualcomm modem firmware of SP2A.220505.008.

Header
MCFG version08010f1b
LabelTelstra_Australia_Commercial
Version1b0f0108
Base version000f0108
Capability14000000
Digest¼ÐrïZ¤Á >zRö×sýÜ-}©”‹rêÜ(]
Trailer version0001
Selected by (1)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC50501any SIM
Settings (92)

efs:/data (5)

ds_dsd_attach_profile.txtunverified = "Attach_Profile_ID:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_dsd_attach_profile.txt
iwlan_s2b_config.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/iwlan_s2b_config.xml
ds_andsf_config.txtunverified = "andsf_rule_mgr_active:1; lte_meas_alpha:50; lte_sampling_interval:1000; lte_avg_interval:5000; wifi_meas_alpha:65; wifi_sampling_interval:1000; wifi_avg_interval:5000; cdma_1x_meas_alpha:50; cdma_1x_avg_interval:6000; cdma_1x_acq_hyst_interval:3000; cdma_1x_lost_hyst_interval:3000; cdma_1x_sampling_interval:2000; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_andsf_config.txt
Default ANDSFlikely =
ANDSF Wi-Fi/cellular steering policy (TS 24.312)efs:/data/default_andsf.xml
andsf.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/andsf.xml

efs:/Data_Profiles (4)

efs:/Data_Profiles/Profile1 =
efs:/Data_Profiles/Profile2 =
efs:/Data_Profiles/Profile3 =
efs:/Data_Profiles/Profile4 =

efs:/efsprofiles (1)

efs:/efsprofiles/overideconfig = " [SIPConfig:GeoLocation] #enable or disable location info inclusion in regular calls iEnableCellInfoInPANI = 0 #enable or disable location info inclusion in regular calls iEnableLocInfoInNormalCall = 0 #enable or disable location info inclusion in emergency calls iEnableLocInfoInEmergencyCall = 1 [QIPCALL:H264_2] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 117 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 118 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_1] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 115 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 116 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_0] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 7 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 113 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 114 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 384 #Preffered bitrate bitrate_preferred = 384 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:EVS_0] #channel aware setting ch_aw_recv = -1 #This config is used for hf only hf_only = 0 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, *Bandwidth = 5 #This config is used for bit rate. It has to be in DECIMAL format. *BitRate = 127 [QIPCALL:EVS_1] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, *Bandwidth = 5 #This config is used for bit rate. *BitRate = 127 [QIPCALL:EVS_2] #channel aware setting ch_aw_recv = -1 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:EVS_3] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:H265_2] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationTimers] #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for SSIM device wlanGaurdTimer = 7 #This config item controls the Register configuration for the network-initiated De reg Timer value. networkInitiatedDeRegistrationTimer = 0 #This config item controls the Retry timer for permanent PDP failures pdnRetryLongTimer = 10 #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for MSIM device wlanGaurdTimerMSIM = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for SSIM device wwanGaurdTimer = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for MSIM device wwanGaurdTimerMSIM = 10 #This config item controls the Retry timer for temporary failures pdnRetryShortTimer = 60 [QIPCALL:H265_0] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [QIPCALL:H265_1] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Ut:UtConfiguration] #This config item controls the media element type for Call Barring Service. 0:No media tag support, 1:One media tag per media type, 2: include both audio and video tags mediaElementSupportForCB = 0 #This config item specifies if the realm is to trimmed or not. 0:Not enabled(default), 1:enabled isTrimRealmEnabled = 0 #This config item specifies if IR92v10 is enabled or not. 0:Not enabled(default), 1:enabled isIr92V10Enabled = 0 #This config item controls the time for which the PDN needs to be kept Active after a SS request is completed pdnHysTimerValue = 0 #This config item controls the Maximum time within which a Response should be sent to UI maxResponseTimerValue = 0 #This config item controls the action item when there is no SIB value for CB request. 0:Default, 1:Reject, 2:Audio Only, 3:Both Audio and Video emptySIBUsageForCB = 0 #This config item controls the action item. When a rule id is not present in a server xml, a request is not allowed. It is used on VDF-Portugal only now. 0:Not to check a rule ID(Default), 1:Block a request when rule ID is not present in a server xml blockIfRuleIDAbsent = 0 [SIPConfig:FeatureFlags] #enable or disable sip instance inclusion in contact header IsSipInstanceNeeded = 1 #enable or disable Cellular-Network-Info header IsCNIEnabled = 1 #enable or disable header compact form IsCompactFormEnabled = 0 #enable or disable IsUIReadyStatusCheckNeeded IsUIReadyStatusCheckNeeded = 0 #disable StopTimerBon1xx once 1xx response is not received StopTimerBon1xx = 0 #enable or disable IsImsiNeededForContactHeader IsImsiNeededForContactHeader = 0 [QIPCALL:ImsVoiceSrvccConfig] #This config is required to enable bSRVCC. *bSrvccEnabled = 1 #This config is required to enable aSRVCC. *aSrvccEnabled = 1 #This config is required to enable mid call SRVCC. *midcallSrvccEnabled = 1 [QIPCALL:ImsRtcpConfig] #This config is required to configure the RR bandwidth for Video. rrForVideo = 2000 #This config is required to configure the timer for RTCP #monitoring. rtcpLinkAlivenessTimer = 20 #This config is required to configure the RS bandwidth for Audio. rsForAudio = 600 #This config is required to disbale/enable the RTCP monitoring. disableRTCPMonitoring = 0 #This config is required to configure the timer for RTCP #Reporting in VT call. rtcpReportingIntervalInVideo = 1 #This config is required to configure the RS bandwidth for Video. rsForVideo = 600 #This config is required to configure the RR bandwidth for Audio. rrForAudio = 2000 [QIPCALL:AMR_4] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:G711_2] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMA [QIPCALL:G711_1] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:G711_0] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:AMR_0] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_1] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_2] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:AMR_3] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:ImsVoiceQoSConfig] #This config is required to enable sending SDP answer in PRACK #for 183 if the local qos is granted before 183 response is recvd by #the UE. qosOptimization = 0 #This config is required to configure the timer for dedicated #bearer allocation. qosReservationTimer = 8000 #This config is required to enable set the desired qos strength #for local and remote UEs. qosDesiredStrength = 1 #This config is required to enable 183 for Reneg qosMc183 = 0 #This config is required to configure if the UE must wait for #video dedicated bearer allocation during call setup. localQosResReqVideo = 1 #This config is required to configure if the UE must wait for #text dedicated bearer allocation during call setup. localQosResReqText = 1 #This config is required to configure the early QoS timer for video dedicated #bearer allocation. earlyQosReservationTimer = 0 #This config is required to enable Qos precondition negotiation #in SDP. qosPreconditionsEnabled = 1 #This config is required to enable Qos MC precondition negotiation #in SDP. qosMcPreconditionsEnabled = 0 #This config is required to configure the MBR threshold. iMBRthresholdValue = 0 #This config is required to configure if the UE must wait for #audio dedicated bearer allocation during call setup. localQosResReqAudio = 1 #This config is required to configure if the initial SDP #directionality should be inactive in REINVITE when preconditions are #used reinviteSdpDirInactive = 0 #This config is required to enable MBR check for video bearer. qosMbrVideoCheckReqEnabled = 1 #This config is required to configure if the initial SDP #directionality should be inactive when preconditions are used. inviteSdpDirInactive = 0 #This config is required to enable MBR check for audio bearer. qosMbrAudioCheckReqEnabled = 0 #This config is required to enable mid-call precondition for Call Hold/Resume qosMcHold = 0 [Ut:XCAPCommonHC] #This config item controls the configuration of BSF server address bsfServerAddress = "" #This config item controls whether GBA_U is enabled or not useGBAMEOnly = 0 #This config item controls whether ims prefix is added or not for Ub request like as bsf.ims.mnc005.mcc232.pub.3gppnetwork.org includeIMSPrefixForUSIM = 0 #This config item controls whether BSF server supports TLS bsfServerTlsSupport = 0 [Registration:RegistrationFeatureFlags] #This config item specifies if the sub operator is APTG and special handling is required for Options unsubscribed error or not. 0:Not enabled(default), 1:enabled optionsUnsubscribedSpecialHandling = 0 [QIPCALL:ImsVoiceSessionTimerConfig] #This config is required to configure the session refresher shall #be UAC/UAS. sessionRefresherType = QP_CONFIG_SES_REFRESHER_UAC #This config is required to enable session timer support. sessionTimerEnabled = 1 #This config is required to enable Stand Alone Session Expiry #negotiation. standAloneEnabled = 1 #This config is required to enable Sesssion Expiry timer #negotiation. allowSeNegotiation = 0 #This config is required to configure the method for session #referesh shall be REINVITE/UPDATE. sessionRefresherMethod = QP_CONFIG_SES_REFRESH_UPDATE [QIPCALL:ImsVoiceConfig] #This config is required to configure the Emergency call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network emergencyCallCancelTimer = 500 #This config is required to configure the default WPS invite duration. wpsInviteDuration = 0 #This config is required to enable 380 response validation as per #3GPP. enableAlternateSrvRspCheck = 1 #This config is required to set the display text priority #subscription. displayTextPriority = 2 #This config is required to include MTT USSD feature tag into IMS registration. ussdAcceptContact = "+g.3gpp.nw-init-ussi" #This config is required to configure the default invite retry counter. inviteRetryCounter = 2 #This config is required to select the default emergency URI if sub category matches with multiple entries e911SelectDefURI = 0 #This config is required to disable early media timer. disableEarlyMediaTimer = 0 #This config is required to configure the voice call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network voiceCallCancelTimer = 0 #This config is required to enable PEM header in 183. enablePEMHeaderIn183 = 0 #This config is required to configure the default URI type #(SIP/TEL) for MO calls. uriType = QPE_IMS_URI_TEL #This config is required to configure the terminating identity presentation or restriction type. terminatingIdentityService = 0 #This config is required to configure the default WPS fallback duration. wpsFallbackDuration = 0 #This config is required to configure the ignoring of AS value ignoreASValidation = 0 #This config is required to set error code for CT submode. sessionEndResponseTimeout = 0 #This config is required to enable VoWIFI Call Continuity to LTE NonVOPS. enableVCCtoLTENonVOPS = 0 #This config is required to enable emergency call operation in CS-only mode. emergCallCSOnly = 0 #This config is required to configure number format during roaming, geo-local/home-local phoneContextPolicy = QPE_IMS_PHONE_CONTEXT_GEO_LOCAL #This config is required to set the phone context domain source. PhoneContextSource = QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_MCC_MNC #This config is required to set preconditions enabled with qos events ignored. ignoreQOSEvents = 0 #This config is required to enable the MT USSI. enableMTUSSI = 1 #This config is required to configure the privacy type. Set 0: for none, 1: for id, 2: for header. privacyType = 2 [Registration:RegistrationDefaultParams] #This config item will be used to configure default UserName to register with Network userName = "" #This config item will be used to configure default authType to register with Network authType = "" #This config item will be used to configure default Display Name to register with Network displayName = "" #This config item will be used to configure default DomainName to register with Network domainName = "" #This config item will be used to configure default authSecertKey authSecertKey = "465b5ce8b199b49faa5f0a2ee238a6bc" #This config item will be used to configure default Private URI to register with Network privateURI = "" #This config item will be used to configure default is3GPP is3GPP = 0 #This config item will be used to configure default Realm to register with Network realm = "" #This config item will be used to configure default public URI to register with Network publicURI = "" #This config item will be used to configure default Password to register with Network password = "" [QIPCALL:ImsVoiceSuppsConfig] #This config is required to configure the timer for Notify #response to Refer. notifyReferRspTimer = 20 #This config is required to end the conference call automatically #when all other participants left the call. endConfCallUponNoParticipant = 1 #This config is required to enable presentation of the call to #the user when UE is already in two calls (active and held). *presentThirdCalltoUser = 1 #This config is required to configure the conference event #package subscription timer. confEvtSubTimer = 3600 #This config is required to configure the dialog for the #conference event subscribe request. confEvtSubOutOfDialog = 0 #This config is required to configure the three party conf URI #for KDDI. threePartyConfFactoryUri = "" #This config is required to enable the conference event package #subscription. confEvtPakageEnabled = QPE_IMS_CONF_PCKG_ORIGINATOR_ONLY [QIPCALL:ImsRtcpXRConfig] #This config is required to enable RTCP-XR support. rtcpXrEnabled = 0 [SMSDAN:DANSettings] #This config item controls QIPCall 1x SMS and Voice Enabled (0:DAN SMS can be sent only if there is no voice call. #1:Enabled; DAN and MO SMS can be sent even when a voice call is up). smsAndVoiceOver1x = 0 #This NV item is used for configuring the transport channel preference on which DAN is to be sent. channelPreference = 0 #This config item controls the DAN Retry Timer Interval Duration (In ms) retryTimer = 0 #This config item controls the DAN Max Retry Counter maxRetryCount = 0 #This NV item is used for controlling DAN Hysterisis Timer Duration hysterisisTimer = 0 [QIPCALL:H263_0] #payload type number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationCounters] #This config item controls the Immediate Retry timer for failures maxPDNIntermediateRetries = 1 [QIPCALL:ImsVideoConfig] #This config is required to configure the LTR mode. ltrMode = QP_CONFIG_IMS_LTR_ENABLED_RESTRICT_QC #This config is required to set the video_capability_for_invite_no_sdp for #incoming INVITE without SDP. video_capability_for_invite_no_sdp = 1 #Internal:This config is required to store peer supported #services trackPeerServices = 0 [SIPConfig:Transport] #above this size choose TCP and value 0 means disable tcp port open on UE TCPThresholdValue = 1400 #enable or disable TCP Static threshold TCPEnableStaticThreshold = 0 [SIPConfig:StandardTimers] #sip registration expires value SipRegValue = 0 #sip reg subscription expires value SipSubscribeValue = 0 [SIPConfig:IPSec] #integrity scheme for ipsec sip messages IntScheme = 3 #encryption algo for ipsec sip messages EncAlgo = 7 [SMSDAN:SMSSettings] #This config item controls the SMS Feature tag smsAcceptContact = "+g.3gpp.smsip" [MEDIA:MediaCommon] #This config item specifies if overall rate adaptation feature is enabled or not. audioRAEnable = 1 #This config item specifies maximum mtu size for the rtp packet mtuSize = 1400 [Registration:RegistrationSettings] #This config item controls Registration over IWLAN in airplane mode enableRegistrationInLPM = 2 #This config item controls PCSCF IP fallback feature pcscfBasedIPFallback = 0 #This config item controls TTY over IMS enableTTYOverIMS = 0 #This config item controls Reregistration over WIFI during Activate 3G call BlockRegOverWifiWhileActiveCSCall = 1 #This config item controls Reregistration over WIFI during Activate 1x call BlockRegOverWifiWhileActive1XCall = 0 [Ut:XcapHCConfigUserProfile] #This config item controls the configured user name configUserName = "" #This config item controls the configured user name configUserPassword = "" [DPL:Common] #This config item determines usage to read the SIM card parameters (ISIM, USIM ) etc #Possible INTEGER values for override are as follows: #QPE_CONFIG_IMS_FILE_READ = 0 --> File Read Param Source #QPE_CONFIG_IMS_NV_READ = 1 --> NV Read Param Source #QPE_CONFIG_IMS_CARD_READ = 2 --> Card Read Param Source to read from ISIM #QPE_CONFIG_IMS_FILE_READ_AUTH_ENABLED = 3 --> File Read Param Auth enabled (ONLY for testing) #QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED = 4 --> USIM fallback enabled ParamSrc = QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED [QIPCALL:ImsMediaProfileConfig] #This config is required to video codec profile list on 4G. VideoProfile1 = "H264_0" #This config is required to audio codec profile list. *AudioProfile1 = "EVS_1_127;AMR_1_104;AMR_0_102" [QIPCALL:ImsVoWifiConfig] #This config is required to configure the wifi connectivity #backoff timer. wifiConnectivityBackoffTimer = 10 [MEDIA:MediaDscp] #This config item specifies dscp value for audio audio = 46 #This config item specifies dscp value for video video = 46 [QIPCALL:ImsVideoModifyConfig] #This config is required to configure the timer in msecs for #waiting on user response to the incoming upgrade req. localUpgradeAcceptTimer = 20000 #This config is required to configure the timer in secs for #response from the peer to the sent upgrade req. remoteUpgradeRejectTimer = 40 [SIPConfig:CustomTimers] #reliable response retry timer cap TRelResponseRetry = 0 "

efs:/google (4)

efs:/google/paris_version = "g670_default_32_201910022029 "
efs:/google/cust_ims_ua_enable = 1
efs:/google/user_agent_template = "Telstra Google [MI__ap] Android[AV__ap] [SW__ap]"
efs:/google/ua_model_tr_table.txt = "Pixel 3a XL:G020A Pixel 3a:G020E"

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -118; LTEDLRSRPThresholdTargetHigh = -115; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 3; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -15; WCDMA_TRAT_ECIO_Threshold = -10; WCDMA_SRAT_RSCP_Threshold = -115; WCDMA_TRAT_RSCP_Threshold = -110; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -125; LTE_RSRP_Single_in = -118; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -170; LTE_SNR_Single_out = 75; LTE_SNR_Single_in = 85; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/data/3gpp (1)

3GPP MTUlikely = 1460
Default PDN MTU in bytesefs:/nv/item_files/data/3gpp/ds_3gpp_mtu

efs:/nv/item_files/data/wlan_config (1)

wlan_offload_configunverified = 2
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wlan_offload_config

efs:/nv/item_files/datamodem/protocols (1)

efs:/nv/item_files/datamodem/protocols/ip6_default_mtu = 1358

efs:/nv/item_files/gps/cgps/sm (2)

gnss_lpp_enableunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lpp_enable
gnss_lppe_cp_configunverified = 19
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lppe_cp_config

efs:/nv/item_files/ims (24)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified = "Telstra"
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 1= Enabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 2
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item

efs:/nv/item_files/modem/data/3gpp/dsmgr (1)

emergency_apn_typeunverified = 1310730x20001
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/dsmgr/emergency_apn_type

efs:/nv/item_files/modem/data/3gpp/ps (2)

modem_def_prof_supportunverified = No value
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/modem_def_prof_support
disable_mtu_requestunverified = 1
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/disable_mtu_request

efs:/nv/item_files/modem/lte/rrc/cap (3)

lte_feature_disableunverified =
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/lte_feature_disable
mdt_r10_feature_disableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/mdt_r10_feature_disable
fdd_cap_r11unverified = 26927431680xa0800000
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/fdd_cap_r11

efs:/nv/item_files/modem/mmode (11)

SMS domain preference = 1= PS (IMS) SMS preferred
SMS over IMS preferenceefs:/nv/item_files/modem/mmode/sms_domain_pref
SMS mandatorylikely = 0= Off
SMS is mandatory for the device (block LTE if IMS/SGs SMS registration fails)efs:/nv/item_files/modem/mmode/sms_mandatory
Voice domain preference = 3= IMS PS voice preferred
E-UTRAN voice domain (TS 24.301 9.9.3.44)efs:/nv/item_files/modem/mmode/voice_domain_pref
ue_based_cwunverified = 257
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/ue_based_cw
custom_emerg_infounverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/custom_emerg_info
mid_call_srvcc_infounverified = 10995129077770x10000138801
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/mid_call_srvcc_info
get_net_auto_modeunverified
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/get_net_auto_mode
Version = 0
Value = 1
Reserved = 0
lte_emerg_redialunverified = 657930x10101
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_emerg_redial
supplement_service_domain_prefunverified = 3
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/supplement_service_domain_pref
wifi_configunverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/wifi_config
LTE band preferencelikely = ffffffffff7fffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref

efs:/nv/item_files/modem/nas (6)

EMM NAS itemslikely =
32-byte EMM configuration blobefs:/nv/item_files/modem/nas/emm_nas_nv_items
Ignore MT CSFB during VoLTE = 1= On
Ignore a mobile-terminated CSFB page while a VoLTE call is activeefs:/nv/item_files/modem/nas/lte_nas_ignore_mt_csfb_during_volte_call
ISRlikely = 0= Off
Idle-mode Signalling Reduction (TS 23.401)efs:/nv/item_files/modem/nas/isr
reg_nv_itemsunverified =
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/reg_nv_items
Max validate SIM counterlikely = 3
SIM validation retry limitefs:/nv/item_files/modem/nas/max_validate_sim_counter
t3245_timerunverified = 30
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/t3245_timer

efs:/nv/item_files/modem/sms (1)

Refresh vote OKlikely = 1= On
Vote TRUE for SIM REFRESHefs:/nv/item_files/modem/sms/mmgsdi_refresh_vote_ok

efs:/nv/item_files/wcdma/l1 (1)

wl1_nb_rejection_nvunverified = 019001000010050a
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/l1/wl1_nb_rejection_nv

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

efs:/sd (1)

efs:/sd/rat_acq_order =

nv (21)

Bannerlikely = "TelstraAll"
nv:71
RTRE Configurationlikely = 0
nv:855
Acquisition Order Preferencelikely = 0
nv:848
Network Selection Mode Preferencelikely = 0
nv:849
GSM/UMTS SMS Bearer Preferencelikely = 2
nv:909
GSM/UMTS Cell Broadcast SMS Carrier Configurationlikely = 1
nv:1016
GSM/UMTS Cell Broadcast SMS User Preferencelikely = 2
nv:1017
MS SMS Max Number Of SMSlikely = 23
nv:3006
SMS MO Retry Periodlikely = 0
nv:3532
SMS MO Retry Intervallikely = 0
nv:3533
UMTS AMR Codec Preference Configlikely = 15
nv:6850
NAS Release Compliancelikely = 3
nv:4722
Mode preference = 4= Automatic
Digital/Analog Mode Preferencenv:10
Hybrid preference = 1= On
Hybrid CDMA 1x + HDR operationnv:562
CS TO VOIP Fallback Timerlikely = 10
nv:6830
VOIP Cancel Retry Timerlikely = 10
nv:6831
AAGPS Default QoS Timelikely = 64
nv:1918
AAGPS Positioning Modes Supportedlikely = 65407
nv:1920
RRC Integrity Enabledlikely = 1
nv:880
RRC Ciphering Enabledlikely = 1
nv:881
RRC Fake Security Enabledlikely = 0
nv:882

VDF_Australia_Commercial in the Qualcomm modem firmware of SP2A.220505.008.

Header
MCFG version0801040d
LabelVDF_Australia_Commercial
Version0d040108
Base version00040108
Capability14000000
Digest“ãÈ;Å $)Q#lóìƒax¤edŒÄ3L!£«ÚŠ
Trailer version0001
Selected by (5)

The SIMs the modem loads this configuration for.

ByValueWhich SIMs
MCC-MNC50503any SIM
MCC-MNC50506any SIM
MCC-MNC50507any SIM
MCC-MNC50588any SIM
MCC-MNC50599any SIM
Settings (91)

efs:/data (5)

ds_dsd_attach_profile.txtunverified = "Attach_Profile_ID:1; "
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_dsd_attach_profile.txt
iwlan_s2b_config.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/iwlan_s2b_config.xml
ds_andsf_config.txtunverified = "andsf_rule_mgr_active:1; lte_meas_alpha:50; lte_sampling_interval:1000; lte_avg_interval:5000; wifi_meas_alpha:65; wifi_sampling_interval:1000; wifi_avg_interval:5000; cdma_1x_meas_alpha:50; cdma_1x_avg_interval:6000; cdma_1x_acq_hyst_interval:3000; cdma_1x_lost_hyst_interval:3000; cdma_1x_sampling_interval:2000;"
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/ds_andsf_config.txt
Default ANDSFlikely =
ANDSF Wi-Fi/cellular steering policy (TS 24.312)efs:/data/default_andsf.xml
andsf.xmlunverified =
Data services setting: Data services (PDN, throttling, AT commands)efs:/data/andsf.xml

efs:/Data_Profiles (4)

efs:/Data_Profiles/Profile1 =
efs:/Data_Profiles/Profile2 =
efs:/Data_Profiles/Profile3 =
efs:/Data_Profiles/Profile4 =

efs:/efsprofiles (1)

efs:/efsprofiles/overideconfig = " [SIPConfig:GeoLocation] #enable or disable location info inclusion in regular calls iEnableCellInfoInPANI = 0 #enable or disable location info inclusion in regular calls iEnableLocInfoInNormalCall = 0 #enable or disable location info inclusion in emergency calls iEnableLocInfoInEmergencyCall = 1 #to set the threshold for uncertainty validation fUnCertaintyThreshold = 0.0 [QIPCALL:H264_2] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 117 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 118 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_1] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 8 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 115 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 116 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 335 #Preffered bitrate bitrate_preferred = 335 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:H264_0] #This config is to specify the profile for H264. Only use value 1 profile = 1 #Preffered resolution. Possible values: #INVALID_RESOLUTION = 0, #PORTRAIT_SQCIF_RESOLUTION, // 1 #LANDSCAPE_SQCIF_RESOLUTION, // 2 #PORTRAIT_QQVGA_RESOLUTION, // 3 #LANDSCAPE_QQVGA_RESOLUTION, // 4 #PORTRAIT_QCIF_RESOLUTION, // 5 #LANDSCAPE_QCIF_RESOLUTION, // 6 #PORTRAIT_QVGA_RESOLUTION, // 7 #LANDSCAPE_QVGA_RESOLUTION, // 8 #PORTRAIT_CIF_RESOLUTION, // 9 #LANDSCAPE_CIF_RESOLUTION, // 10 #PORTRAIT_VGA_RESOLUTION, // 11 #LANDSCAPE_VGA_RESOLUTION, // 12 #PORTRAIT_HD_720_RESOLUTION, // 13 #LANDSCAPE_HD_720_RESOLUTION, // 14 resolution_preferred = 7 #Preffered Framerate framerate_preferred = 15 #payload type for packetization mode 0. number above 96 payload_type_packetization_mode0 = 113 #Codec level. possible values: #INVALID_LEVEL = 0x00, #Level 1 = 0x01, #Level 1B = 0x02, #Level 11 = 0x03, #Level 12 = 0x04, #Level 13 = 0x05, #Level 2 = 0x06, #Level 21 = 0x07, #Level 22 = 0x08, #Level 3 = 0x09, #Level 31 = 0x0A, #Level 32 = 0x0B, #Level 4 = 0x0C, #Level 41 = 0x0D, #Level 42 = 0x0E, #Level 5 = 0x0F, #Level 51 = 0x10 level = 4 #payload type for packetization mode 1. number above 96 and #different from packetization mode 0 payload_type_packetization_mode1 = 114 #AS value if IPv6 is used ipv6_AS_value = 0 #Max Bitrate bitrate_max = 384 #Preffered bitrate bitrate_preferred = 384 #Min Bitrate bitrate_min = 64 #Max Framerate framerate_max = 15 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' #Min Framerate framerate_min = 7 #Supported resolution resolutions_supported = 0 #AS value if IPv4 is used ipv4_AS_value = 0 [QIPCALL:EVS_0] #channel aware setting ch_aw_recv = -1 #This config is used for hf only hf_only = 0 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_SWB #This config is used for bit rate. It has to be in DECIMAL format. BitRate = 120 [QIPCALL:EVS_1] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, *Bandwidth = 5 #This config is used for bit rate. *BitRate = 127 [QIPCALL:EVS_2] #channel aware setting ch_aw_recv = -1 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [SMSDAN:USSDSettings] #This config item controls the Language String to be used. ussdLangString = "" [QIPCALL:H265_2] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationTimers] #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for SSIM device wlanGaurdTimer = 7 #This config item controls the Register configuration for the network-initiated De reg Timer value. networkInitiatedDeRegistrationTimer = 0 #This config item controls the Retry timer for permanent PDP failures pdnRetryLongTimer = 10 #This config item controls the time in seconds to wait for WLAN RAT in wifi preferred mode for MSIM device wlanGaurdTimerMSIM = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for SSIM device wwanGaurdTimer = 7 #This config item controls the time in seconds to wait for WWAN RAT in cellular preferred mode for MSIM device wwanGaurdTimerMSIM = 10 #This config item controls the Retry timer for temporary failures pdnRetryShortTimer = 60 [QIPCALL:H265_0] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [QIPCALL:H265_1] #payload type for packetization mode 0. number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Ut:UtConfiguration] #This config is required to configure the server responses for which UT is to be blocked permanently BlockUtResponseCodes = "" #This config item controls the media element type for Call Barring Service. 0:No media tag support, 1:One media tag per media type, 2: include both audio and video tags mediaElementSupportForCB = 0 #This config item specifies if the realm is to trimmed or not. 0:Not enabled(default), 1:enabled isTrimRealmEnabled = 0 #This config item specifies if IR92v10 is enabled or not. 0:Not enabled(default), 1:enabled isIr92V10Enabled = 0 #This config item controls the time for which the PDN needs to be kept Active after a SS request is completed pdnHysTimerValue = 0 #This config item controls the Maximum time within which a Response should be sent to UI maxResponseTimerValue = 0 #This config item controls the action item when there is no SIB value for CB request. 0:Default, 1:Reject, 2:Audio Only, 3:Both Audio and Video emptySIBUsageForCB = 0 #This config item controls the action item. When a rule id is not present in a server xml, a request is not allowed. It is used on VDF-Portugal only now. 0:Not to check a rule ID(Default), 1:Block a request when rule ID is not present in a server xml blockIfRuleIDAbsent = 0 [SIPConfig:FeatureFlags] #enable or disable sip instance inclusion in contact header IsSipInstanceNeeded = 0 #enable or disable Cellular-Network-Info header IsCNIEnabled = 1 #enable or disable header compact form IsCompactFormEnabled = 0 #enable or disable IsUIReadyStatusCheckNeeded IsUIReadyStatusCheckNeeded = 0 #disable StopTimerBon1xx once 1xx response is not received StopTimerBon1xx = 0 #enable or disable IsImsiNeededForContactHeader IsImsiNeededForContactHeader = 0 [QIPCALL:ImsVoiceSrvccConfig] #This config is required to enable bSRVCC. bSrvccEnabled = 1 #This config is required to enable aSRVCC. aSrvccEnabled = 1 #This config is required to enable mid call SRVCC. midcallSrvccEnabled = 1 [QIPCALL:ImsRtcpConfig] #This config is required to configure the RR bandwidth for Video. rrForVideo = 2000 #This config is required to configure the timer for RTCP #monitoring. rtcpLinkAlivenessTimer = 20 #This config is required to configure the RS bandwidth for Audio. rsForAudio = 600 #This config is required to disbale/enable the RTCP monitoring. disableRTCPMonitoring = 0 #This config is required to configure the timer for RTCP #Reporting in VT call. rtcpReportingIntervalInVideo = 1 #This config is required to configure the RS bandwidth for Video. rsForVideo = 600 #This config is required to configure the RR bandwidth for Audio. rrForAudio = 2000 [QIPCALL:AMR_4] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:G711_2] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMA [QIPCALL:G711_1] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:G711_0] #This config is dtx. #0 - dtx disable #1 - dtx enable Dtx_enable = 1 #This config is to set G711 mode #enum - G711_MODE_PCMU, G711_MODE_PCMA Mode = G711_MODE_PCMU [QIPCALL:AMR_0] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_1] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_WB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:AMR_2] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_OA [QIPCALL:AMR_3] #This config is bandwidth. #enum - BW_NW, BW_WB BandWidth = BandWidth_NB #This config is modeset. ModeSet = 0 #This config is mode. #enum - AMR_MODE_BE, AMR_MODE_OA Mode = AMR_MODE_BE [QIPCALL:ImsVoiceQoSConfig] #This config is required to enable sending SDP answer in PRACK #for 183 if the local qos is granted before 183 response is recvd by #the UE. qosOptimization = 0 #This config is required to configure the timer for dedicated #bearer allocation. qosReservationTimer = 8000 #This config is required to enable set the desired qos strength #for local and remote UEs. qosDesiredStrength = 1 #This config is required to enable 183 for Reneg qosMc183 = 0 #This config is required to configure if the UE must wait for #video dedicated bearer allocation during call setup. localQosResReqVideo = 1 #This config is required to configure if the UE must wait for #text dedicated bearer allocation during call setup. localQosResReqText = 1 #This config is required to enable/disable video CRBT feature VideoCRBT = 0 #This config is required to configure the early QoS timer for video dedicated #bearer allocation. earlyQosReservationTimer = 0 #This config is required to enable Qos precondition negotiation #in SDP. qosPreconditionsEnabled = 1 #This config is required to enable Qos MC precondition negotiation #in SDP. qosMcPreconditionsEnabled = 0 #This config is required to configure the MBR threshold. iMBRthresholdValue = 0 #This config is required to configure if the UE must wait for #audio dedicated bearer allocation during call setup. localQosResReqAudio = 1 #This config is required to configure if the initial SDP #directionality should be inactive in REINVITE when preconditions are #used reinviteSdpDirInactive = 0 #This config is required to enable MBR check for video bearer. qosMbrVideoCheckReqEnabled = 1 #This config is required to configure if the initial SDP #directionality should be inactive when preconditions are used. inviteSdpDirInactive = 0 #This config is required to enable MBR check for audio bearer. qosMbrAudioCheckReqEnabled = 0 #This config is required to enable QCI match with the requested media type for qos checkQciForQoSMediaType = 0 #This config is required to enable mid-call precondition for Call Hold/Resume qosMcHold = 0 [Ut:XCAPCommonHC] #This config item controls the configuration of BSF server address bsfServerAddress = "" #This config item controls whether GBA_U is enabled or not useGBAMEOnly = 0 #This config item controls whether ims prefix is added or not for Ub request like as bsf.ims.mnc005.mcc232.pub.3gppnetwork.org includeIMSPrefixForUSIM = 0 #This config item controls whether BSF server supports TLS bsfServerTlsSupport = 0 [Registration:RegistrationFeatureFlags] #This config item specifies if the sub operator is APTG and special handling is required for Options unsubscribed error or not. 0:Not enabled(default), 1:enabled optionsUnsubscribedSpecialHandling = 0 #This config item controls whether need to reset AWT timer. notResetAWTTimerEnable = 0 [QIPCALL:EVS_3] #channel aware setting ch_aw_recv = 2 #This config is bandwidth. #enum - BW_NB, BW_WB, BW_SWB, BW_FB, BW_NB_WB, BW_NB_SWB, BW_NB_FWB, Bandwidth = BandWidth_WB #This config is used for bit rate. BitRate = 120 [QIPCALL:ImsVoiceSessionTimerConfig] #This config is required to configure the session refresher shall #be UAC/UAS. sessionRefresherType = QP_CONFIG_SES_REFRESHER_UAS #This config is required to enable session timer support. sessionTimerEnabled = 1 #This config is required to enable Stand Alone Session Expiry #negotiation. standAloneEnabled = 1 #This config is required to enable Sesssion Expiry timer #negotiation. allowSeNegotiation = 0 #This config is required to configure the method for session #referesh shall be REINVITE/UPDATE. sessionRefresherMethod = QP_CONFIG_SES_REFRESH_UPDATE [QIPCALL:ImsVoiceConfig] #This config is required to configure the Emergency call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network emergencyCallCancelTimer = 500 #This config is required to configure the default WPS invite duration. wpsInviteDuration = 0 #This config is required to enable 380 response validation as per #3GPP. enableAlternateSrvRspCheck = 1 #This config is required to set the display text priority #subscription. displayTextPriority = 3 #This config is required to include MTT USSD feature tag into IMS registration. ussdAcceptContact = "+g.3gpp.nw-init-ussi" #This config is required to configure the default invite retry counter. inviteRetryCounter = 2 #This config is required to select the default emergency URI if sub category matches with multiple entries e911SelectDefURI = 0 #This config is required to disable early media timer. disableEarlyMediaTimer = 0 #This config is required to configure the voice call Cancel Timer.TImer is started when UE triggered CANCEL and waiting for 200 OK of CANCEL from network voiceCallCancelTimer = 0 #This config is required to place AMR WB before AMR in encryption call. preferAMRWBinEncryptionCall = 0 #This config is required to enable PEM header in 183. enablePEMHeaderIn183 = 0 #This config is required to configure the default URI type #(SIP/TEL) for MO calls. uriType = QPE_IMS_URI_TEL #This config is required to configure the enabling of sending REINVITE #during Active calls HO. reInviteonHOforActiveCalls = 0 #This config is required to configure the terminating identity presentation or restriction type. terminatingIdentityService = 2 #This config is required to configure the default WPS fallback duration. wpsFallbackDuration = 0 #This config is required to configure the ignoring of AS value ignoreASValidation = 0 #This config is required to configure the max-red value max_red = 0 #This config is required to set error code for CT submode. sessionEndResponseTimeout = 0 #This config is required to enable VoWIFI Call Continuity to LTE NonVOPS. enableVCCtoLTENonVOPS = 0 #This config is required to enable emergency call operation in CS-only mode. emergCallCSOnly = 1 #This config is required to configure number format during roaming, geo-local/home-local phoneContextPolicy = QPE_IMS_PHONE_CONTEXT_GEO_LOCAL #This config is required to enable Call end on RTP inactivity. CallEndonRTPInactivity = 0 #This config is required to set the phone context domain source. PhoneContextSource = QPE_IMS_PHONE_CONTEXT_SOURCE_FROM_MCC_MNC #This config is required to set preconditions enabled with qos events ignored. ignoreQOSEvents = 0 #This config is required to enable the MT USSI. enableMTUSSI = 1 #This config is required to configure the privacy type. Set 0: for none, 1: for id, 2: for header. privacyType = 2 [Registration:RegistrationDefaultParams] #This config item will be used to configure default UserName to register with Network userName = "" #This config item will be used to configure default authType to register with Network authType = "" #This config item will be used to configure default Display Name to register with Network displayName = "" #This config item will be used to configure default DomainName to register with Network domainName = "" #This config item will be used to configure default authSecertKey authSecertKey = "465b5ce8b199b49faa5f0a2ee238a6bc" #This config item will be used to configure default Private URI to register with Network privateURI = "" #This config item will be used to configure default is3GPP is3GPP = 0 #This config item will be used to configure default Realm to register with Network realm = "" #This config item will be used to configure default public URI to register with Network publicURI = "" #This config item will be used to configure default Password to register with Network password = "" [QIPCALL:ImsVoiceSuppsConfig] #This config is required to configure the timer for Notify #response to Refer. notifyReferRspTimer = 20 #This config is required to end the conference call automatically #when all other participants left the call. endConfCallUponNoParticipant = 1 #This config is required to enable presentation of the call to #the user when UE is already in two calls (active and held). presentThirdCalltoUser = 1 #This config is required to configure the conference event #package subscription timer. confEvtSubTimer = 3600 #This config is required not to send unsubscribe to NW for conference call when there is #no notify-terminated received. isUnsubcribeDisabled = 0 #This config is required to configure the dialog for the #conference event subscribe request. confEvtSubOutOfDialog = 0 #This config is required to configure the three party conf URI #for KDDI. threePartyConfFactoryUri = "" #This config is required to enable the conference event package #subscription. *confEvtPakageEnabled = 2 [QIPCALL:ImsRtcpXRConfig] #This config is required to enable RTCP-XR support. rtcpXrEnabled = 0 [SMSDAN:DANSettings] #This config item controls QIPCall 1x SMS and Voice Enabled (0:DAN SMS can be sent only if there is no voice call. #1:Enabled; DAN and MO SMS can be sent even when a voice call is up). smsAndVoiceOver1x = 0 #This NV item is used for configuring the transport channel preference on which DAN is to be sent. channelPreference = 0 #This config item controls the DAN Retry Timer Interval Duration (In ms) retryTimer = 0 #This config item controls the DAN Max Retry Counter maxRetryCount = 0 #This NV item is used for controlling DAN Hysterisis Timer Duration hysterisisTimer = 0 [QIPCALL:H263_0] #payload type number above 96 payload_type = 0 #This config is to ensure if the configuration is included in the #offer exclude_config_from_offer = '0' [Registration:RegistrationCounters] #This config item controls the Immediate Retry timer for failures maxPDNIntermediateRetries = 1 [QIPCALL:ImsVideoConfig] #This config is required to configure the LTR mode. ltrMode = QP_CONFIG_IMS_LTR_DISABLED #This config is required to configure if VT capability can be impacted by modile data. vtImpactedByMobileData = 0 #This config is required to set the video_capability_for_invite_no_sdp for #incoming INVITE without SDP. video_capability_for_invite_no_sdp = 1 #Internal:This config is required to store peer supported #services trackPeerServices = 0 [SIPConfig:Transport] #above this size choose TCP and value 0 means disable tcp port open on UE TCPThresholdValue = 1500 #enable or disable TCP Static threshold TCPEnableStaticThreshold = 0 [SIPConfig:StandardTimers] #sip registration expires value SipRegValue = 0 #sip reg subscription expires value SipSubscribeValue = 0 [SIPConfig:IPSec] #integrity scheme for ipsec sip messages IntScheme = 3 #encryption algo for ipsec sip messages EncAlgo = 7 [SMSDAN:SMSSettings] #This config item used to configure the error code and used while reject Incoming MT sms while NAS is busy in service one SMS. IncomingSmsRejectCode = 400 #This config item used to enable or disable feature of rejecting incoming SMS when IMS is already processing a SMS. EnableIncomingSmsRejectFeature = 0 #This config item controls the SMS Feature tag smsAcceptContact = "+g.3gpp.smsip" [MEDIA:MediaCommon] #This config item specifies if overall rate adaptation feature is enabled or not. audioRAEnable = 1 #This config item specifies maximum mtu size for the rtp packet mtuSize = 1400 [Registration:RegistrationSettings] #This config item controls Registration over IWLAN in airplane mode enableRegistrationInLPM = 2 #This config item controls PCSCF IP fallback feature pcscfBasedIPFallback = 0 #This config item controls TTY over IMS enableTTYOverIMS = 0 #This config item controls Reregistration over WIFI during Activate 3G call BlockRegOverWifiWhileActiveCSCall = 1 #This config item controls Reregistration over WIFI during Activate 1x call BlockRegOverWifiWhileActive1XCall = 0 [Ut:XcapHCConfigUserProfile] #This config item controls the configured user name configUserName = "" #This config item controls the configured user name configUserPassword = "" [DPL:Common] #This config item determines usage to read the SIM card parameters (ISIM, USIM ) etc #Possible INTEGER values for override are as follows: #QPE_CONFIG_IMS_FILE_READ = 0 --> File Read Param Source #QPE_CONFIG_IMS_NV_READ = 1 --> NV Read Param Source #QPE_CONFIG_IMS_CARD_READ = 2 --> Card Read Param Source to read from ISIM #QPE_CONFIG_IMS_FILE_READ_AUTH_ENABLED = 3 --> File Read Param Auth enabled (ONLY for testing) #QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED = 4 --> USIM fallback enabled ParamSrc = QPE_CONFIG_IMS_USIM_FB_MODE_ENABLED [QIPCALL:ImsMediaProfileConfig] #This config is required to video codec profile list on 4G. VideoProfile1 = "H264_0" #This config is required to audio codec profile list. *AudioProfile1 = "EVS_1_127;AMR_1_104;AMR_0_102" [QIPCALL:ImsVoWifiConfig] #This config is required to configure the wifi connectivity #backoff timer. wifiConnectivityBackoffTimer = 10 [MEDIA:MediaDscp] #This config item specifies dscp value for audio audio = 46 #This config item specifies dscp value for video video = 46 [QIPCALL:ImsVideoModifyConfig] #This config is required to configure the timer in msecs for #waiting on user response to the incoming upgrade req. localUpgradeAcceptTimer = 20000 #This config is required to configure the timer in secs for #response from the peer to the sent upgrade req. remoteUpgradeRejectTimer = 40 [SIPConfig:CustomTimers] #reliable response retry timer cap TRelResponseRetry = 0 "

efs:/google (3)

efs:/google/paris_version = "g670_default_32_201910022029 "
efs:/google/cust_ims_ua_enable = 1
efs:/google/user_agent_template = "Vodafone Google [MI__ap] Android [SW__ap]"

efs:/ims (1)

imshandoverconfigunverified = "Adding Comments LTE RSRQ Src LTE SNR Destination Some Comments Ignore these commenrs @@@ LTEDLSRATMonitorTime = 2; LTEDLTRATMonitorTime = 2; LTEDLRSRPThresholdSrcLow = -113; LTEDLRSRPThresholdTargetHigh = -110; MediaULJitterGood = 10; Alpha_media = 65; MediaULJitterAcceptable = 40; MediaULJitterFair = 40; MediaULJitterBad = 50; MediaULFrameLossGood = 5; MediaULFrameLossAcceptable = 3; MediaULFrameLossFair = 20; MediaULFrameLossBad = 50; MediaDL95JitterGood = 4; MediaDL95JitterAcceptable = 60; MediaDL95JitterFair = 6; MediaDL95JitterBad = 7; MediaDLJitterGood = 10; MediaDLJitterAcceptable = 40; MediaDLJitterFair = 40; MediaDLJitterBad = 50; MediaDLFrameLossGood = 5; MediaDLFrameLossAcceptable = 3; MediaDLFrameLossFair = 20; MediaDLFrameLossBad = 50; MediaDLQDJSpeechBad = 3; MediaDLQDJSilenceBad = 24; MediaDLQDJSpeechAcceptable = 2; MediaDLQDJSilenceAcceptable = 16; MediaTimerInterval = 1; MediaMetricsDisabled = 0; DeltaMediaULJitterAcceptable = -24; DeltaMediaDLJitterAcceptable = -24; DeltaMediaDLQDJSpeechBad = -1; DeltaMediaDLQDJSilenceBad = -8; ALGO_FLAVOR = 0; 2G3GMeasurementsFeatureEnabled = 1; 2G3GReselectionTimer = 1; DISABLE_CS_REPOINT = 1; GERAN_RXLEV_ALPHA = 0.65; GERAN_SNR_ALPHA = 0.65; GERAN_RXQUAL_ALPHA = 0.95; monitor2GTimeInSec = 2; GERAN_SRAT_RSSI_THRESHOLD = -100; GERAN_TRAT_RSSI_THRESHOLD = -95; GERAN_SRAT_SNR_Threshold = 7; GERAN_TRAT_SNR_Threshold = 10; GERAN_SRAT_BER_Threshold = 6; GERAN_TRAT_BER_Threshold = 5; GRAN_SamplingTimer = 500; GERAN_Count_Suspended_State = 50; WCDMA_ECIO_ALPHA = 0.65; WCDMA_RSCP_ALPHA = 0.65; monitor3GTimeInSec = 2; WCDMA_SRAT_ECIO_Threshold = -16; WCDMA_TRAT_ECIO_Threshold = -7; WCDMA_SRAT_RSCP_Threshold = -112; WCDMA_TRAT_RSCP_Threshold = -103; WCDMA_SamplingTimer = 500; WWAN_GUARD_TIMER = 7; WLAN_GUARD_TIMER = 7; WCDMA_Count_Suspended_State = 10; SingleRatFeatureEnable = 1; LTE_RSRP_Single_out = -125; LTE_RSRP_Single_in = -118; LTE_RSRQ_Single_out = -200; LTE_RSRQ_Single_in = -170; LTE_SNR_Single_out = 75; LTE_SNR_Single_in = 85; UTRAN_RSCP_Single_out = -118; UTRAN_RSCP_Single_in = -113; UTRAN_ECIO_Single_out = -17; UTRAN_ECIO_Single_in = -12; GERAN_RSSI_Single_out = -103; GERAN_RSSI_Single_in = -98; GERAN_BER_Single_out = 7; GERAN_BER_Single_in = 6; GERAN_SNR_Single_out = 5; GERAN_SNR_Single_in = 8;"
IMS setting: IMSefs:/ims/imshandoverconfig

efs:/nv/item_files/data/3gpp (1)

3GPP MTUlikely = 1500
Default PDN MTU in bytesefs:/nv/item_files/data/3gpp/ds_3gpp_mtu

efs:/nv/item_files/data/wlan_config (1)

wlan_offload_configunverified = 2
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/data/wlan_config/wlan_offload_config

efs:/nv/item_files/datamodem/protocols (1)

efs:/nv/item_files/datamodem/protocols/ip6_default_mtu = 1500

efs:/nv/item_files/gps/cgps/sm (2)

gnss_lpp_enableunverified = 2
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lpp_enable
gnss_lppe_cp_configunverified = 19
GNSS setting: GNSS / locationefs:/nv/item_files/gps/cgps/sm/gnss_lppe_cp_config

efs:/nv/item_files/ims (24)

IMSVoiceDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVoiceDynamicConfig
IMSVideoDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSVideoDynamicConfig
IMSEmerDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSEmerDynamicConfig
IMSRTPDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSRTPDynamicConfig
IMSCodecDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSCodecDynamicConfig
IMSTestDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSTestDynamicConfig
IMSWifiDynamicConfigunverified =
IMS setting: IMSefs:/nv/item_files/ims/IMSWifiDynamicConfig
qp_ims_plani_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_plani_config
ims_sip_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_sip_config
qp_ims_cap_discovery_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_cap_discovery_config
qp_ims_rcs_client_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_rcs_client_config
DANPrivateSettingsunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANPrivateSettings
qp_ims_xcap_private_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_private_config_item
ims_user_agentunverified =
IMS setting: IMSefs:/nv/item_files/ims/ims_user_agent
IMS enable = 1= Enabled
Enables the IMS task (VoLTE, VoWiFi, SMS over IMS)efs:/nv/item_files/ims/IMS_enable
ims_operation_modeunverified = 2
IMS setting: IMSefs:/nv/item_files/ims/ims_operation_mode
qp_ims_service_enablement_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_service_enablement_config
qp_ims_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_common_config
qp_ims_reg_config_dbunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_reg_config_db
RegistrationConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/RegistrationConfiguration
SMSConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/SMSConfiguration
DANConfigurationunverified =
IMS setting: IMSefs:/nv/item_files/ims/DANConfiguration
qp_ims_xcap_common_configunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_xcap_common_config
qp_ims_ut_config_itemunverified =
IMS setting: IMSefs:/nv/item_files/ims/qp_ims_ut_config_item

efs:/nv/item_files/modem/data/3gpp/dsmgr (1)

emergency_apn_typeunverified = 1310730x20001
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/dsmgr/emergency_apn_type

efs:/nv/item_files/modem/data/3gpp/ps (1)

modem_def_prof_supportunverified = No value
Data services setting: Data services (PDN, throttling, AT commands)efs:/nv/item_files/modem/data/3gpp/ps/modem_def_prof_support

efs:/nv/item_files/modem/lte/rrc/cap (2)

lte_feature_disableunverified =
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/lte_feature_disable
mdt_r10_feature_disableunverified = 1
LTE setting: LTE RRC / L1 / L2efs:/nv/item_files/modem/lte/rrc/cap/mdt_r10_feature_disable

efs:/nv/item_files/modem/mmode (14)

SMS domain preference = 1= PS (IMS) SMS preferred
SMS over IMS preferenceefs:/nv/item_files/modem/mmode/sms_domain_pref
SMS mandatorylikely = 0= Off
SMS is mandatory for the device (block LTE if IMS/SGs SMS registration fails)efs:/nv/item_files/modem/mmode/sms_mandatory
Voice domain preference = 3= IMS PS voice preferred
E-UTRAN voice domain (TS 24.301 9.9.3.44)efs:/nv/item_files/modem/mmode/voice_domain_pref
ue_based_cwunverified = 257
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/ue_based_cw
custom_emerg_infounverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/custom_emerg_info
mid_call_srvcc_infounverified = 10995129077770x10000138801
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/mid_call_srvcc_info
get_net_auto_modeunverified
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/get_net_auto_mode
Version = 0
Value = 1
Reserved = 0
lte_emerg_redialunverified = 657930x10101
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/lte_emerg_redial
supplement_service_domain_prefunverified = 3
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/supplement_service_domain_pref
wifi_configunverified =
Multimode setting: Call manager / system determinationefs:/nv/item_files/modem/mmode/wifi_config
LTE band preferencelikely = ffffffffff7fffff
LTE band bitmap (bit n = band n+1)efs:/nv/item_files/modem/mmode/lte_bandpref
SMS onlylikely = 0= Off
Register for SMS onlyefs:/nv/item_files/modem/mmode/sms_only
UE usage settinglikely = 0= Voice centric
TS 24.301 UE usage settingefs:/nv/item_files/modem/mmode/ue_usage_setting
LTE disable durationlikely = 0
How long LTE stays disabled when CS services are unavailableefs:/nv/item_files/modem/mmode/lte_disable_duration

efs:/nv/item_files/modem/nas (5)

EMM NAS itemslikely =
32-byte EMM configuration blobefs:/nv/item_files/modem/nas/emm_nas_nv_items
Ignore MT CSFB during VoLTE = 1= On
Ignore a mobile-terminated CSFB page while a VoLTE call is activeefs:/nv/item_files/modem/nas/lte_nas_ignore_mt_csfb_during_volte_call
reg_nv_itemsunverified =
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/reg_nv_items
Max validate SIM counterlikely = 3
SIM validation retry limitefs:/nv/item_files/modem/nas/max_validate_sim_counter
t3245_timerunverified = 30
NAS setting: NAS mobility management / PLMN selectionefs:/nv/item_files/modem/nas/t3245_timer

efs:/nv/item_files/modem/sms (1)

Refresh vote OKlikely = 1= On
Vote TRUE for SIM REFRESHefs:/nv/item_files/modem/sms/mmgsdi_refresh_vote_ok

efs:/nv/item_files/wcdma/l1 (1)

wl1_nb_rejection_nvunverified = 019001000010050a
WCDMA setting: WCDMA RRCefs:/nv/item_files/wcdma/l1/wl1_nb_rejection_nv

efs:/policyman (1)

Carrier policylikely =
PolicyMan rules keyed on MCC/PLMN: RAT capability, RF bands, UE modeefs:/policyman/carrier_policy.xml

efs:/sd (1)

efs:/sd/rat_acq_order =

nv (21)

Bannerlikely = "VDF_AU"
nv:71
RTRE Configurationlikely = 0
nv:855
Acquisition Order Preferencelikely = 0
nv:848
Network Selection Mode Preferencelikely = 0
nv:849
GSM/UMTS SMS Bearer Preferencelikely = 2
nv:909
GSM/UMTS Cell Broadcast SMS Carrier Configurationlikely = 1
nv:1016
GSM/UMTS Cell Broadcast SMS User Preferencelikely = 2
nv:1017
MS SMS Max Number Of SMSlikely = 23
nv:3006
SMS MO Retry Periodlikely = 0
nv:3532
SMS MO Retry Intervallikely = 0
nv:3533
UMTS AMR Codec Preference Configlikely = 13
nv:6850
NAS Release Compliancelikely = 3
nv:4722
Mode preference = 31= GWL
Digital/Analog Mode Preferencenv:10
Hybrid preference = 1= On
Hybrid CDMA 1x + HDR operationnv:562
CS TO VOIP Fallback Timerlikely = 10
nv:6830
VOIP Cancel Retry Timerlikely = 10
nv:6831
AAGPS Default QoS Timelikely = 64
nv:1918
AAGPS Positioning Modes Supportedlikely = 65407
nv:1920
RRC Integrity Enabledlikely = 1
nv:880
RRC Ciphering Enabledlikely = 1
nv:881
RRC Fake Security Enabledlikely = 0
nv:882